Fabrication and characterization of a planar interleaved micro-transformer with magnetic core

This paper presents the design, the fabrication and the characterization of a planar interleaved micro-transformer with an Yttrium Iron Garnet (YIG) core. The design of this micro-transformer and the manufacturing steps are presented. HFSS software is used for the conception and the simulation of the interleaved magnetic micro-transformer. It is composed of two identical windings. A bottom magnetic core is used to improve the integrated transformer performances. To form the windings, we have used a surface micromachining process. We have also used a negative photoresist (SU-8) as an insulating layer and as support for the fabrication of a bridge to connect the central end of the coils to the ground shield. The micro-transformer have been characterized with impedance meter up to 100 MHz, and completed to 1 GHz using vector network analyzer.     

Determination of Chromium (VI) in Airborne Particulate Matter by Electrothermal Atomic Absorption Spectrometry

Hexavalent chromium Cr(VI) is a well-established carcinogen associated with lung, nasal, and sinus cancer. Cr(VI) threshold limit values in workroom air have been recently lowered. Consequently, the currently available analytical methods are insufficiently sensitive or high cost. In this paper, a simple, cost-effective, sensitive, and reproducible method using solid-phase extraction with electrothermal atomic absorption spectrometry for determination of hexavalent chromium in airborne samples is reported. The method validation included selectivity, linearity, accuracy, and precision. Interferences from other ions likely to be present in airborne samples, including trivalent chromium, were tested and selectivity was demonstrated. The detection and quantification limits were, respectively, as low as 0.1 and 0.4?µg?L^?1. The linearity ranged from 0.5 to 50.0?µg?L^?1, with a regression coefficients exceeding 0.998. The extraction recovery exceeded 98%. The developed method was successfully compared with a reference spectrophotometric method. The performances achieved were similar to ion chromatography and high-performance liquid chromatography approaches. The novel method was tested on airborne samples collected from the workplace. The method’s performance suggests that it may be an alternative to high-cost techniques for monitoring occupational exposure to hexavalent chromium.     

Tunnelling current in Schottky diodes containing InAs quantum dots

Current transport mechanism in Schottky diode containing InAs quantum dots (QDs) is investigated using temperature-varying current-voltage characteristics. We found that the tunnelling emission has obvious effects on the I-V characteristics. The I-V-T measurements revealed clear effects of QDs on the overall current flow. Field emission (FE, pure tunnelling effect) was observed at low temperature and low voltages bias region. The zero-bias barrier height decreases and the ideality factor increases with decreasing temperature, and the ideality factor was found to follow the T₀-effect. When the reverse bias is varied, the ideality factors of Schottky barriers exhibit oscillations due to the tunnelling of electrons through discrete levels in quantum dots. The traps distributed within InAlAs layer can also act as a transition step for reverse bias defect-assisted tunnelling current which can phenomenologically explain the decrease of the effective barrier height with measurement temperature.     

Selection of timed token protocol parameters to guarantee messagedeadlines

Networks that use the timed token protocol (such as the 100 Mbit/s FDDI network) are well suited for real-time applications because they guarantee, to each node, an average bandwidth and a bounded access time to the communication network. This guarantee is necessary but not sufficient for the timely delivery of deadline-constrained messages; protocol parameters must be carefully selected to ensure that these messages meet their deadlines. This paper addresses the issue of selecting the protocol parameters TTRT (target token rotation time) and the synchronous capacities assigned to each node. The objective is to guarantee that each synchronous message is transmitted before its deadline. An upper bound is derived on the worst case achievable utilization (WCAU) of any parameter selection scheme. The WCAU of a scheme is defined as the maximum utilization U such that the scheme guarantees all synchronous messages as long as their utilization is less than U. An algorithm for selecting the above parameters is proposed, The algorithm is shown to have a WCAU that is very close to the upper bound     

Linear and Bilinear Multiplier Operators for the Dunkl Transform

The main purpose of this article is to study the L _p -boundedness of linear and bilinear multiplier operators for the Dunkl transform in the one dimensional case.     

Laser micro-machining of small objects for high-energy laser experiments

Targets for high-energy laser experiments are polymer or metal objects of small dimensions. These objects need high-precision processes (typical sizes of a few hundred micrometers with micrometer accuracy). In this paper, some targets for high-energy laser experiments obtained by picosecond Q-switched Nd:YAG laser and KrF excimer laser micro-machining are presented. All of the targets use an original process. Activities include cutting, drilling, and marking elements. A summary of targets made using laser processes will be presented.     

Multi-scale Modeling of Vision-Guided Remodeling and Age-Dependent Growth of the Tree Shrew Sclera During Eye Development and Lens-Induced Myopia

The sclera uses unknown mechanisms to match the eye’s axial length to its optics during development, producing eyes with good focus (emmetropia). A myopic eye is too long for its own optics. We propose a multi-scale computational model to simulate eye development based on the assumption that scleral growth is controlled by genetic factors while scleral remodeling is driven by genetic factors and the eye’s refractive error. We define growth as a mechanism that changes the tissue volume and mass while remodeling involves internal micro-deformations that are volume-preserving at the macro-scale. The model was fitted against longitudinal refractive measurements in tree shrews of different ages and exposed to three different visual conditions: (i) normal development; (ii) negative lens wear to induce myopia; and (iii) recovery from myopia by removing the negative lens. The model was able to replicate the age- and vision-dependent response of the tree shrew experiments. Scleral growth ceased at younger age than scleral remodeling. The remodeling rate decreased as the eye emmetropized but increased at any age when a negative lens was put on. The predictive power of the model was investigated by calculating the susceptibility to scleral remodeling and the response to form deprivation myopia in tree shrews. Both predictions were in good agreement with experimental data that were not used to fit the model. We propose the first model that distinguishes scleral growth from remodeling. The good agreement of our results with experimental data supports the notion that scleral growth and scleral remodeling are two independently controlled mechanisms during eye development.     

Adsorption kinetics of 4-chlorophenol onto granular activated carbon in the presence of high frequency ultrasound

This work describes the results of investigations carried out to examine the adsorption kinetics of 4-chlorophenol (4-CP) from aqueous solution containing tert-butyl alcohol (10%, v/v) onto granular activated carbon (GAC) in the presence of ultrasound of different high frequencies (516, 800 and 1660 kHz) and acoustic powers (15.2, 21.5, 31.1 and 38.3 W). The main objective of this study is to describe the mechanism of ultrasound-assisted adsorption rather than the enhancement of adsorption capacity. Sonochemical degradation of 4-CP was studied in the absence and presence of tert-butyl alcohol. The sonolysis of 4-CP is effectively inhibited by the addition of tert-butyl alcohol (10%, v/v) and very little 4-CP degradation occurs, indicating that little or no pyrolysis of the compound occurs. Without addition of tert-butyl alcohol, after 300 min and at 1660 kHz, the removal of 4-CP in the presence of ultrasound for an acoustic power of 38.3 W was nearly total (99%), but in the conventional method only 60% was eliminated. In this case, the removal of 4-CP by GAC in the ultrasound-assisted technique is due to both adsorption and ultrasonic degradation, but the removal by simple stirring is only due to adsorption, which makes a direct comparison unacceptable. In order to distinguish sonochemical degradation and adsorption of 4-CP onto GAC and to make an exact and practical comparison of the adsorption in the absence and presence of ultrasound, kinetic adsorption experiments were conducted using aqueous solution containing 10% (v/v) tert-butyl alcohol. The obtained results show that both adsorption rate and adsorbed amount were significantly enhanced and improved in the presence of ultrasound for all the studied frequencies and powers. The enhancement of adsorption is favored by increasing ultrasonic power. Adsorption kinetic data were modeled using the liquid-film mass transfer equation and intraparticle diffusion model. The values of the intraparticle diffusion coefficient obtained in the presence of ultrasound are greater than that obtained in the absence of ultrasound. In the initial period of adsorption, where external mass transfer is assumed to predominate, liquid-film mass transfer coefficients significantly increased by the assistance of ultrasound. These results indicate that ultrasound enhances the mass transport in the pores as well as across the boundary layer. This effect increased with increasing ultrasonic power for the three studied frequencies. The average order for the studied ultrasonic waves according to the initial adsorption rate, the intraparticle diffusion coefficient and the liquid-film mass transfer coefficient is 516 kHz>800 kHz>1660 kHz.     

Intensification of sonochemical decolorization of anthraquinonic dye Acid Blue 25 using carbon tetrachloride

In this work, the influence of CCl₄ on the sonochemical decolorization of anthraquinonic dye Acid Blue 25 (AB25) in aqueous medium was investigated using high frequency ultrasound (1700 kHz). This frequency, reputed ineffective, was tested in order to introduce the ultrasound waves with high frequency in the field of degradation or removal of dyes from wastewater, due to its limited use in this field, and to increase the application of high frequency ultrasound wave in the field of environmental protection. The effects of various parameters such as the concentration of CCl₄, frequency (22.5 and 1700 kHz), solution pH, temperature and tert-butyl alcohol adding on the decolorization rate of AB25 was studied. The obtained results clearly demonstrated the significant intensification of AB25 decolorization in the presence of CCl₄. The enhancement effect of CCl₄ increased by decreasing temperature and by increasing the CCl₄ concentration. The pH has a significant influence on the bleaching of dye both in the absence and presence of CCl₄. The three investigated dosimeter methods (KI oxidation, Fricke reaction and H₂O₂ production) well corroborate the improvement of the sonochemical effects in the presence of CCl₄. The best sonochemical decolorization rate of AB25 in aqueous solution both in the absence and presence of CCl₄ is observed to occur at 1700 kHz compared to 22.5 kHz. The sonochemical oxidation of CCl₄ generates oxidizing species in the liquid phase that are highly beneficial for oxidation of hydrophilic and non-volatile pollutant, such as dyes, because they are less susceptible to free radical attack due to lower stability of the generated free radicals.