Estimation of growth rate in unidirectionally solidified multicrystalline silicon by the growth-induced striation method

Multicrystalline silicon was grown by unidirectional solidification method using the accelerated crucible rotation technique. The application of the accelerated crucible rotation technique in unidirectional solidification method induced growth striations across the axial direction of the grown crystal. This striation pattern was observed from carbon concentration distribution, obtained by using Fourier transform infrared spectroscopy. The generated striation pattern was found to be weak and discontinuous. Some striations were absent, probably due to back melting, caused during each crucible rotation. From the growth striations and applied time period in crucible rotation, the growth rate was estimated by using Fourier transformation analysis.     

Evaluation of the drag force by integrating the energy dissipation rate in stokes flow for 2D domains using the FEM

The total drag force on the surface of a body, which is the sum of the form drag and the skin friction drag in a 2D domain, is numerically evaluated by integrating the energy dissipation rate in the whole domain for an incompressible Stokes fluid. The finite element method is used to calculate both the energy dissipation rate in the whole domain as well as the drag on the boundary of the body. The evaluation of the drag and the energy dissipation rate are post-processing operations which are carried out after the velocity field and the pressure field for the flow over a particular profile have been obtained. The results obtained for the flow over three different but constant area profiles—a circle, an ellipse and a cross-section of a prolate spheroid—with uniform inlet velocity are presented and it is shown that the total drag force times the velocity is equal to the total energy dissipation rate in the entire finite flow domain. Hence, by calculating the energy dissipation rate in the domain with unit velocity specified at the far-field boundary enclosing the domain, the drag force on the boundary of the body can be obtained.     

Picture Fuzzy Threshold Graphs with Application in Medicine Replenishment

In this study, a novel concept of picture fuzzy threshold graph (PFTG) is introduced. It has been shown that PFTGs are free from alternating 4-cycle and it can be constructed by repeatedly adding a dominating or an isolated node. Several properties about PFTGs are discussed and obtained the results that every picture fuzzy graph (PFG) is equivalent to a PFTG under certain conditions. Also, the underlying crisp graph (UCG) of PFTG is a split graph (SG), and conversely, a given SG can be applied to constitute a PFTG. A PFTG can be decomposed in a unique way and it generates three distinct fuzzy threshold graphs (FTGs). Furthermore, two important parameters i.e., picture fuzzy (PF) threshold dimension (TD) and PF partition number (PN) of PFGs are defined. Several properties on TD and PN have also been discussed. Lastly, an application of these developed results are presented in controlling medicine resources.     

Performance of cellular packet CDMA in an integrated voice/data network

This paper presents a simulation-based study of cellular packet CDMA systems operating in an integrated voice/data traffic scenario. Spread-spectrum CDMA provides a suitable framework for resource-shared packet transport capable of combining isochronous (voice, ISDN) and bursty data services. In this work, a general network model for cellular packet CDMA with mixed voice/data traffic is described and used to evaluate the capacity/performance impact of several key system parameters. First, the effect of spreading factor (N) and forward error correction (FEC) rate are studied, confirming earlier work indicating a weak dependence onN and a well-defined optimum code rate in the range of 0.5–0.7 (with BCH coding). Next, the effect of propagation loss coefficient () on network capacity is investigated over a range of possible assumptions for, including both constant and distance-dependent models. The results show that system capacity depends strongly on, varying by as much as a factor of 2 over the range of parameters considered. For a given distance-dependent assumption, performance results are also obtained for different cell sizes in order to understand the overall spatial reuse efficiency achievable in different cellular and microcellular scenarios. This is followed by an investigation of traffic source model effects: first the capacity improvement from voice activity detection VAD) is presented, showing the expected 21 gains. Results for varying proportions of voice and data traffic intensities indicate that the operating efficiency does not change significantly as the proportion of bursty data relative to voice is varied.     

Synthesis,thermal, and photocrosslinking studies of thermotropic liquid crystalline poly(benzylidene‐ether)esters containing α,β‐unsaturated ketone moiety in the main chain

A series of poly(benzylidene‐ether)esters containing a photoreactive benzylidene chromophore in the main chain were synthesized from 2,6‐bis(4‐hydroxy‐3‐methoxybenzylidene)cyclohexanone (BHMBCH) with various aliphatic and aromatic diacid chlorides by an interfacial polycondensation technique. The intrinsic viscosity of the synthesized homo and copolymers determined by Ubbelohde viscometer was found to be 0.12 to 0.17 dL/g. The molecular structure of the monomer and polymers was confirmed by FT‐IR, ¹H NMR, and ¹³C NMR spectral analyses. These polymers were studied for their thermal stability and photochemical properties. Thermal properties were evaluated by thermogravimetric analysis (TGA) and differential scanning calorimetry (DSC). It was found that the polymers were stable up to 280 °C and start degrading thereafter. Increase in acid methylene spacer length decreased the thermal stability. The self‐extinguishing property of the synthesized polymers was studied by calculating the limiting oxygen index (LOI) value using a Van Krevelen's equation. The influence of the length of methylene spacer on phase transition was investigated using DSC and odd‐even effect has been observed. Hot‐stage optical polarizing microscopic (HOPM) study showed that most of the polymers exhibited birefringence and opalescence properties. The photolysis of liquid crystalline poly(benzylidene‐ether)esters revealed that α,β‐unsaturated ketone moiety in the main chain dimerises through 2π + 2π cycloaddition reaction to form a cyclobutane derivative and leads to crosslinking. © 2013 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

A Simple and Effective Modification of PCBM for Use as an Electron Acceptor in Efficient Bulk Heterojunction Solar Cells

[6,6]‐phenyl‐C‐61‐butyric acid methyl ester (PCBM) and poly(3‐hexylthiophene) (P3HT) are the most widely used acceptor and donor materials, respectively, in polymer solar cells (PSCs). However, the low LUMO (lowest unoccupied molecular orbital) energy level of PCBM limits the open circuit voltage (V_oc) of the PSCs based on P3HT. Herein a simple, low‐cost and effective approach of modifying PCBM and improving its absorption is reported which can be extended to all fullerene derivatives with an ester structure. In particular, PCBM is hydrolyzed to carboxylic acid and then converted to the corresponding carbonyl chloride. The latter is condensed with 4‐nitro‐4’‐hydroxy‐α‐cyanostilbene to afford the modified fullerene F . It is more soluble than PCBM in common organic solvents due to the increase of the organic moiety. Both solutions and thin films of F show stronger absorption than PCBM in the range of 250–900 nm. The electrochemical properties and electronic energy levels of F and PCBM are measured by cyclic voltammetry. The LUMO energy level of F is 0.25 eV higher than that of PCBM. The PSCs based on P3HT with F as an acceptor shows a higher V_oc of 0.86 V and a short circuit current (J_sc) of 8.5 mA cm^?2, resulting in a power conversion efficiency (PCE) of 4.23%, while the PSC based on P3HT:PCBM shows a PCE of about 2.93% under the same conditions. The results indicate that the modified PCBM, i.e., F , is an excellent acceptor for PSC based on bulk heterojunction active layers. A maximum overall PCE of 5.25% is achieved with the PSC based on the P3HT: F blend deposited from a mixture of solvents (chloroform/acetone) and subsequent thermal annealing at 120 °C.     

Ligational behavior of new mononucleating NOO ethyl pyruvate Schiff base towards 3d metal(II) ions: an emphasis on antiproliferative and photocleavage property

A series of Co(II), Ni(II), Cu(II), and Zn(II) complexes of a tridentate hydrazone were prepared and characterized by various spectro‐analytical techniques and magnetic moment studies. The complexes were found to be monomeric and non‐electrolytes. The copper complex is electrochemically active in the applied potential range. The compounds synthesized in the present study have shown promising antiproliferative activity when screened using the in vitro method against two human cancer cell lines: HeLa and HepG2. The Escherichia coli DNA‐binding properties of all the compounds were investigated with UV–visible absorption spectrophotometric titrations, viscosity measurements, DNA melting experiments and gel electrophoreses measurements. The compounds were demonstrated to act as DNA intercalators with appreciable DNA‐binding constant values. Copyright © 2012 John Wiley & Sons, Ltd.     

Synthesis of new conjugated copolymers containing 4,8-bis(dodecyloxy)benzo[1,2-b:4,5-b′]dithiophene/5,7-bis(3,4-diethylthien-2-yl)-2,3-diphenylthieno[3,4-b]pyrazine and 4,8-bis(dodecyloxy)benzo[1,2-b:4,5-b′]dithiophene/4,6-di(3,4-diethylthien-2-yl)-thieno[3,4-c][1,2,5]thiadiazole derivatives for photovoltaic applications

Two new donor-acceptor narrow-band-gap photovoltaic copolymers containing various electron-acceptor functional groups, such as thienopyrazine and thienodithiazole derivatives, are synthesized under the conditions of the Suzuki polycondensation reaction and characterized via ¹H NMR spectroscopy and GPC. The optical, electrochemical, and photovoltaic properties of the polymers are examined in detail. Both copolymers have good solubilities, high thermal stabilities, broad absorption regions (350–950 nm), relatively low levels of the highest occupied molecular orbital (?5.01 and ?5.02 eV for polymers I and II, respectively), and narrow band gaps (1.31 and 1.41 eV, respectively). Photovoltaic devices based on a polymer-II-PC₆₀BM (1: 3, wt/wt) mixture under AM 1.5 irradiation of 100 mV/cm² exhibit a power-conversion efficiency of ～0.29%, a short-circuit current of 1.45 mA/cm², an open-circuit voltage of V _oc = 0.67 V, and a fill factor of 0.30. These results are evidence that thienopyrazine functional groups are attractive as electron-acceptor building blocks in organic electronics.     

A Convenient Synthetic Entry Into 2,2-Diorganyl-5,6-Diaryl-1,3,4,2-Dioxaza Silacyclohexene Derivatives VIA Dianion Cyclisation: Sequential One-Pot Cyclosylation

In a convenient one-pot sequence, treatment of bezoin and p-anisoin oximes with sodium hydride in dry THF in 1:2 molar ratio generates 1,5-dianion, which upon subsequent addition of diorganodichlorosilane yields 1,3,4,2-dioxazasilacyclohexene derivatives in good yields. In general, very often a salt elimination route is used for the synthesis of the title compounds.