排序方式: 共有6条查询结果,搜索用时 15 毫秒
1
1.
为了研究多波长掺铒光纤激光放大器的放大特性,在单频放大器的基础上,忽略放大自发辐射,推导了描述多波长掺铒双包层光纤放大器的稳态速率方程组,建立了多波长掺铒光纤放大器的理论模型。利用该模型对单波长放大、双波长放大、四波长放大的特性,进行了数值模拟和理论分析;以四波长的激光信号放大为例,对多波长掺铒光纤放大器的放大特性,均衡增益特性进行了研究。结果表明,在单波长注入情况下,光纤放大器的掺杂光纤存在最佳光纤长度为8m;与小信号放大不同,大功率掺铒光纤放大器在1530nm~1560nm之间增益谱趋于平坦;双波长放大输出功率差随着波长间隔的增加线性增大波长间隔为20nm时,通过调节输入信号功率比可以实现最大功率差6.855W的功率均衡补偿;四波长放大时,通过信号功率配比之后的四波长激光输出功率最大偏差为0.28W,在一定范围内实现了均衡增益。这一结果对于掺铒光纤激光的多波长激光输出以及在激光多普勒测风雷达中的应用具有一定帮助。 相似文献
2.
采用脉冲泵浦方案,研制出了基于增益调制技术的全光纤结构高重频脉冲激光器。采用电路直接调制的激光二极管作为泵浦源,双包层光纤作为增益介质,构造了光纤光栅选模的线形腔结构。实验中通过调整泵浦光脉冲宽度和光纤激光器谐振腔长度,得到了稳定的高重频脉冲。在100 kHz重复频率下,采用21 W的峰值泵浦功率和2.5 s的泵浦脉冲宽度,获得了1.06 m波长,脉冲宽度247 ns的稳定脉冲激光输出。脉冲峰值功率一致性好,平均功率长期功率稳定性为2%。观察并分析了由于纵模拍频在脉冲包络上产生的次脉冲特性。通过一级放大实现89.6 W输出。 相似文献
3.
Propagation of the off-axis superposition of partially coherent beams through atmospheric turbulence 下载免费PDF全文
The propagation properties of the off-axis superposition of
partially coherent beams through atmospheric turbulence and their
beam quality in terms of the mean-squared beam width w(z) and the
power in the bucket (PIB) are studied in detail, where the effects
of partial coherence, off-axis beam superposition and atmospheric
turbulence are considered. The analytical expressions for the
intensity, the beam width and the PIB are derived, and illustrative
examples are given numerically. It is shown that the maximum
intensity Imax and the PIB decrease and w(z) increases as
the refraction index structure constant Cn2 increases.
Therefore, the turbulence results in a degradation of the beam
quality. However, the resulting partially coherent beam with a
smaller value of spatial correlation parameter γ and larger
values of separate distance xd and beam number M is less
affected by the turbulence than that with a larger value of γ
and smaller values of xd and M. The main results obtained
in this paper are explained physically. 相似文献
4.
采用脉冲泵浦方案,研制出了基于增益调制技术的全光纤结构高重频脉冲激光器。采用电路直接调制的激光二极管作为泵浦源,双包层光纤作为增益介质,构造了光纤光栅选模的线形腔结构。实验中通过调整泵浦光脉冲宽度和光纤激光器谐振腔长度,得到了稳定的高重频脉冲。在100kHz重复频率下,采用21W的峰值泵浦功率和2.5μs的泵浦脉冲宽度,获得了1.06μm波长,脉冲宽度247ns的稳定脉冲激光输出。脉冲峰值功率一致性好,平均功率长期功率稳定性为2%。观察并分析了由于纵模拍频在脉冲包络上产生的次脉冲特性。通过一级放大实现89.6 W输出。 相似文献
5.
6.
1