Estimation of growth rate in unidirectionally solidified multicrystalline silicon by the growth-induced striation method

Multicrystalline silicon was grown by unidirectional solidification method using the accelerated crucible rotation technique. The application of the accelerated crucible rotation technique in unidirectional solidification method induced growth striations across the axial direction of the grown crystal. This striation pattern was observed from carbon concentration distribution, obtained by using Fourier transform infrared spectroscopy. The generated striation pattern was found to be weak and discontinuous. Some striations were absent, probably due to back melting, caused during each crucible rotation. From the growth striations and applied time period in crucible rotation, the growth rate was estimated by using Fourier transformation analysis.     

Experimental determination of ionization potentials of tetraphenylporphine and metallotetraphenylporphines

Gas-phase ionization potentials of tetraphenylporphine and some metallotetraphenylporphines have been determined by the method of photocurrent measurements in nonpolar solvents reported previously [1]. The values obtained range from 5.9 to 6.3 eV, depending on the central metal ion, correlating well with the reported polarographic oxidation potentials. It has been concluded that photoelectron ejection from these complexes in isooctane occurs from the porphyrin π-system in all cases including Co(II) tetraphenylporphine, in which the electron is thought to be removed from the metal in polar solvents.     

220-MHz NMR spectra of acrylic monomer–2-substituted 1,3-diolefin alternating copolymers

An investigation by 220-MHz NMR spectroscopy was carried out on the alternating copolymers of acrylic monomer with 2-substituted 1,3-diolefin. The chain structures were determined. The acrylic monomers used were methyl methacrylate (MMA), acrylonitrile (AN), and methacrylonitrile (MAN); isoprene (IP) and chloroprene (CLP) were the 1,3-diolefins. In the MAN–IP alternating copolymer, the 1-position methylene protons of IP showed an AB quartet peak, confirming the α-1 linkage structure. Similarly, in the MMA–CLP and AN–CLP copolymers, the 1-position methylene protons of CLP showed and AB quartet and an ABX pattern, respectively, confirming the α-1 linkage structure in both these cases also. The α-1 linkage structure was also revealed by the decoupling technique in the MAN–CLP alternating copolymer. The AN–IP and MMA–IP alternating copolymers also possess a bond between the α-position of the acrylic monomer and the 1-position of IP. The monomeric units in the alternating copolymers of acrylic monomers with 2-substituted 1,3-diolefins were generally linked at the α-position of acrylic monomer and the 1-position of 1,3-diolefin. On the other hand, in the Diels-Alder adducts of acrylic monomer with 2-substituted 1,3-diolefin, the reaction takes place between the α-position of acrylic monomer and the 4-position of 1,3-diolefin. The regioselectivity of the alternating copolymers and the Diels-Alder adducts is quite compatible with the expectations from molecular orbital theory.     

The synthesis of certain 11,14-dimethoxydeoxypodocarpic acid derivatives. an application to the synthesis of (+)-winterin from drimys winteri

This paper reports the synthesis of several 11,14-dimethoxydeoxypodocarpic acid derivatives from (+)-podocarpic acid. The synthesis of the naturally occurring sesquiterpene, (+)-winterin, from Drimys winteri illustrates a synthetic application of the 11,14-dimethoxy intermediates and establishes the absolute configuration for winterin.     

Immobilization of yeast and the function of immobilized yeast.

Hansenula anomala, which catalyzes an asymmetric reduction, was immobilized in bulk or spherical crosslinked polymers. The catalytic activity of the yeast for enantio-selective reduction of 3,8-dioxo-4-methoxycarbonyl-9-methyl-delta 4(10)-octalin (lab) was severely affected by the immobilization conditions, such as the crosslink density, and by hydrophobicity of polymers and other components used for immobilization, oxygen concentration in the medium, etc. In some immobilized systems, the ratio of resulting enantiomers was inverted from that in a free yeast system.     

Single-component nanodiscs via the thermal folding of amphiphilic graft copolymers with the adjusted flexibility of the main chain

Nanodiscs have attracted considerable attention as structural scaffolds for membrane-protein research and as biomaterials in e.g. drug-delivery systems. However, conventional disc-fabrication methods are usually laborious, and disc fabrication via the self-assembly of amphiphiles is difficult. Herein, we report the formation of polymer nanodiscs based on the self-assembly of amphiphilic graft copolymers by adjusting the persistence length of the main chain. Amphiphilic graft copolymers with a series of different main-chain persistence lengths were prepared and these formed, depending on the persistence length, either rods, discs, or vesicles. Notably, polymer nanodiscs were formed upon heating a chilled polymer solution without the need for any additives, and the thus obtained nanodiscs were used to solubilize a membrane protein during cell-free protein synthesis. Given the simplicity of this disc-fabrication method and the ability of these discs to solubilize membrane proteins, this study considerably expands the fundamental and practical scope of graft-copolymer nanodiscs and demonstrates their utility as tools for studying the structure and function of membrane proteins.

A strategy for the fabrication of nanodiscs via the self-assembly of thermoresponsive amphiphilic graft copolymers is demonstrated.     

Structure in the emission from pyrene evaporated films

Emission spectra and decay times of fluorescence of pyrene thin films prepared by evaporation onto substrates at liquid nitrogen temperature were measured. Structure in the emission from films warmed slowly up to higher temperature is found to the higher energy side of the excimer emission band. The decay time is about 410 ns at temperatures between 110 K and 210 K. But the emission from the film warmed up to a temperature above 210 K shows only the excimer emission. These results are discussed in relation to an amorphous structure in the pyrene evaporated thin film.     

An anomalous emission excited near the absorption edge of pyrene crystals

Emission spectra and decay times of the fluorescence excited at the absorption edge region in pyrene crystals were measured. At liquid nitrogen temperature, the fluorescence under the excitation at 390 nm is considered as the excimer emission and its band peak shifts a little to the short wavelength in comparison with that of the excimer emission under the excitation at 360 nm. The emission decay times under the excitation at the 390 nm and 360 nm are about 155 ns and 180 ns, respectively, at liquid nitrogen temperature. The former decay time changes its value abruptly near 127 K. This abrupt change of the decay time may be due to the phase transition in pyrene crystals.     

Migration of excimers in pyrene crystals

Emission decay times of the new excimer were measured for undoped and perylene doped pyrene crystals. From the decay times obtained, the temperature dependence of the diffusion coefficient of the excimers was deduced by assuming a model in which two electronic states of the new excimer are involved in the energy transfer process. Within this model, it was found that in the upper excimer state the excimers migrated by a hopping process, while in the lower excimer state they migrated as free excimer excitons while undergoing phonon scattering.