Sulfonated poly(aryl ether ketone)s containing naphthalene moieties obtained by direct copolymerization as novel polymers for proton exchange membranes

A series of sulfonated poly(aryl ether ketone)s (SPAEKs) were prepared by aromatic nucleophilic polycondensation of 2,6‐dihydroxynaphthalene with 5,5′‐carbonyl‐bis(2‐fluorobenzenesulfonate) and 4,4′‐difluorobenzophenone. The structure and degree of sulfonation (DS) of the SPAEKs were characterized using ¹H NMR spectroscopy. The experimentally observed DS values were close to the expected values derived from the starting material ratios. The thermal stabilities of the SPAEKs were characterized by thermogravimetric analysis, which showed that in acid and sodium salt forms they were thermally stable in air up to about 240 and 380 °C, respectively. Transparent membranes cast from the directly polymerized SPAEKs exhibited good mechanical properties in both dry and hydrated states. The dependence of water uptake and of membrane swelling on the DS at different temperatures was studied. SPAEK membranes with a DS from 0.72 to 1.60 maintained adequate mechanical properties after immersion in water at 80 °C for 24 h. The proton conductivity of SPAEK membranes with different degrees of sulfonation was measured as a function of temperature. The proton conductivity of the SPAEK films increased with increased DS, and the highest room temperature conductivity (4.2 × 10^?2 S/cm) was recorded for a SPAEK membrane with a DS of 1.60, which further increased to 1.1 × 10^?1 S/cm at 80 °C. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 2866–2876, 2004     

Exploitation of introducing of catalytic centers into layer galleries of layered silicates and related epoxy nanocomposites. I. Epoxy nanocomposites derived from montmorillonite modified with catalytic surfactant‐bearing carboxyl groups

Montmorillonite (MMT) was modified with the acidified cocamidopropyl betaine (CAB) and the resulting organo‐montmorillonite (O‐MMT) was dispersed in an epoxy/methyl tetrahydrophthalic anhydride system to form epoxy nanocomposites. The intercalation and exfoliation behavior of the epoxy nanocomposites were examined by X‐ray diffraction and transmission electron microscopy. The curing behavior and thermal property were investigated by in situ Fourier transform infrared spectroscopy and DSC, respectively. The results showed that MMT could be highly intercalated by acidified CAB, and O‐MMT could be easily dispersed in epoxy resin to form intercalated/exfoliated epoxy nanocomposites. When the O‐MMT loading was lower than 8 phr (relative to 100 phr resin), exfoliated nanocomposites were achieved. The glass‐transition temperatures (T_g's) of the exfoliated nanocomposite were 20 °C higher than that of the neat resin. At higher O‐MMT loading, partial exfoliation was achieved, and those samples possessed moderately higher T_g's as compared with the neat resin. O‐MMT showed an obviously catalytic nature toward the curing of epoxy resin. The curing rate of the epoxy compound increased with O‐MMT loading. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 1192–1198, 2004     

Uniformly third-order accurate TVNE interpolations

In this paper, we develop an approximation procedure for functionsof bounded variations. Our procedure cannot increase the variationof the function being approximated, and also avoids discontinuityof the interpolation function.     

堵塞效应与“全同带”的微观机制

利用处理推转壳模型的改进了的粒子数守恒方法(严格计及堵塞效应),对原子核的转动惯量进行了计算,计算中无任何自由参数,所得转动惯量(包括¹⁷⁰Yb,¹⁷¹Lu¹⁷¹Yb各转动带)及其奇偶差,与实验非常符合,转动惯量的奇偶差灵敏地依赖于被堵塞的能级位置及其对Coriolis力的响应。     

多项式理想准素分解的算法

讨论了多项式理想准素分解的算法,对于理想坐标变换中关键的“一般位置”的计算,给出了一个确定算法,并建立了特别规范Groebner基的概念,利用这一概念及文中提供的相应算法,可以方便地计算理想的维数,进而使用降维的方法来得到高维理想的准素分解。     

Numerical analysis of the rotating viscous flow approaching a solid sphere

A numerical simulation is performed to investigate the flow induced by a sphere moving along the axis of a rotating cylindrical container filled with the viscous fluid. Three‐dimensional incompressible Navier–Stokes equations are solved using a finite element method. The objective of this study is to examine the feature of waves generated by the Coriolis force at moderate Rossby numbers and that to what extent the Taylor–Proudman theorem is valid for the viscous rotating flow at small Rossby number and large Reynolds number. Calculations have been undertaken at the Rossby numbers (R_o) of 1 and 0.02 and the Reynolds numbers (R_e) of 200 and 500. When R_o=O(1), inertia waves are exhibited in the rotating flow past a sphere. The effects of the Reynolds number and the ratio of the radius of the sphere and that of the rotating cylinder on the flow structure are examined. When R_o ? 1, as predicted by the Taylor–Proudman theorem for inviscid flow, the so‐called ‘Taylor column’ is also generated in the viscous fluid flow after an evolutionary course of vortical flow structures. The initial evolution and final formation of the ‘Taylor column’ are exhibited. According to the present calculation, it has been verified that major theoretical statement about the rotating flow of the inviscid fluid may still approximately predict the rotating flow structure of the viscous fluid in a certain regime of the Reynolds number. Copyright © 2004 John Wiley & Sons, Ltd.     

晶格反演的嵌入原子法模型及其应用

讨论一种基于晶格反演的嵌入原子法模型 ,其特点是未知函数的参数化是对原子间对势和单原子电荷密度函数的晶格和 ,而不是对原子间对势和单个原子的电荷密度函数进行的 ,其最大优点在于待定参数可以用物理输入解析地表达出来 ,而不是像大多数埋入原子法模型中那样通过拟合来确定 .给出了它在计算点缺陷 (自间隙杂质和空位原子 )和晶体表面形成能方面的应用 .     

Coordination Sorption of Urea by Novel Urea Sorbent——Polymer-bound Metal Complexes

Urea can be sorbed by coordination (or complexation)with transitional metalpolyacrylic acid complex and transitional metal-polyacrylamide containing polyethylenepolyamine ligand complexes. The experimental results indicate that the sorbents can sorb about 60mg urea per gram of sorbent at 37℃ and the concentration of urea was 1300.0rag/1 in NaH_2PO_4 and Na_2HPO_4 buffer solution (pH=7.0) and the urea sorption capacity was affected by many factors such as other competive ligands, sorption time, pH and the concentration of urea.     

FFC-1离子交换纤维对酸碱有害气体吸附性能的研究

系统考察了不同直径及反离子形式的FFC-1聚羧酸离子交换纤维对酸碱有害气体的穿透吸附,各种温、湿度条件下的吸水率,以及作为有害气体吸附滤除材料的重复使用与再生性能。研究表明:FFC-1纤维直径的减小有利于提高对有害气体的动态吸附容量。在体系温度、相对湿度分别为15℃、50%时,以3D腈纶为起始原料的钠型FFC-1离子交换纤维的吸水率≥350mg/g.纤维;对SO2的穿透吸附容量可达200mg/g.纤维。FFC-1离子交换纤维具有良好的重复使用与再生能力,经20次再生循环使用后,纤维交换容量未见明显变化。     

SYNTHESIS AND MAGNETISM OF BINUCLEAR COPPER(Ⅱ) COMPLEXES CONTAINING SALUCYLAMIDATOCUPRATE(Ⅱ)

New binuclear copper(Ⅱ) complexes, [Cu(samen)Cu(NO_2-phen)]·H_2O and [Cu(sampn)-Cu(NO_2-phen)]·2H_2O have been synthesized, where samen~(4-), sampn~(4-) and NO_2-phen denote N, N′-ethylenedisalicylamidate anion, N, N′-1, 2-propanedisalicylamidate anion and 5-nitro-1, 10-phenanthroline respectively. 3ased on IR, elemental analyses and electronic spectra, the complexes are proposed to have a phenoxy-bridged structure and to consist of the Cu(Ⅱ)ion in distorted planar environment. The complexes have been characterized with varlable-temperature magnetic susceptibility (4—300 K) and the observed data were fit to those from a modified Bleaney-Bowers equation by least-squares method, giving the exchange integral J=-63.0 cm~(-1) (samen) and J=-46.5cm~(-1) (sampn). This indicates the existence of antiferromagnetic spin exchange interaction among the metal ions.