Effect of pH on adsolubilization of single and binary organic solutes into a cationic hydrocarbon surfactant adsorbed layer on silica

The adsolubilization behaviors of 2-naphthol, biphenyl, and their binary solutes in the hexadecyltrimethyl ammonium bromide (HTAB) adsorbed layer formed on silica have been studied with solution pH. Two feed concentrations of HTAB are employed: 1.5 and 3.0 mmol dm(-3). At the feed concentration of 1.5 mmol dm(-3) HTAB, most of HTAB are adsorbed on the silica as a monolayer, while a bilayer formation occurs at the feed concentration of 3.0 mmol dm(-3). It is found that the adsolubilized amounts of respective single solutes increase with increasing solution pH except acidic region for biphenyl under a constant feed concentration of 2-naphthol (0.4 mmol dm(-3)) and biphenyl (0.047 mmol dm(-3)). The adsolubilization of binary solutes depends on the feed concentration of HTAB; at the low HTAB feed concentration, competitive adsolubilization between 2-naphthol and biphenyl occurs above pH 4.5, while at the high HTAB feed concentration the adsolubilization of biphenyl is enhanced by the incorporation of 2-naphthol over a whole pH region. These behaviors in the adsolubilization are discussed from the surfactant structure of HTAB adsorbed as well as the admicellar partitioning coefficients.     

Bounds on the Mass for the High Dimensional Gaussian Lattice Field between Two Hard Walls

We consider the d(≥3)-dimensional Gaussian lattice field confined between two hard walls. We show that the field becomes massive and identify the precise asymptotic behavior of the mass and the variance of the field as the height of the wall goes to infinity.     

Improved Photobleaching for (1,10-phenanthroline)tris[4,4,4-trifluoro-1-(2-thienyl)-1,3-butanedionato]europium(III) Particle Embedded in Sol-Gel Derived Glass Film

In this research, we investigated improved photobleaching characteristics of (1,10-phenanthroline)tris[4,4,4-trifluoro-1-(2-thienyl)-1,3-butanedionato]europium(III) by forming nano-particles embedded into a sol-gel derived silica glass film by a conventional sol-gel process. The relative photoluminescence intensities after the UV irradiation for 90 min were 88, 76, and 67% for nano-particles in the sol-gel derived glass film, powders in the sol-gel derived glass film, and raw powders, respectively. This result indicates that the phtobleaching of this Eu-complex can improved by forming nano-partcile structures by a reprecipitation method and embedding in the sol-gel derived silica glass.     

Electrochemical detection of endotoxin using recombinant factor C zymogen

We have developed a zymogen-based electrochemical sensor. Zymogen is an inactive enzyme precursor (proenzyme) and it is necessary to transform it biochemically (e.g., by hydrolysis and conformational change) to make it an active enzyme. In this study, we demonstrated the detection of endotoxin by using recombinant Factor C (rFC), which is a protease zymogen activated by endotoxin binding. The activated rFC hydrolyzes a synthetic substrate of Boc-Val-Pro-Arg-p-nitroanilnide to generate an electrochemical active compound, p-nitroaniline (pNA). The liberated pNA was detected by differential pulse voltammetry at –0.75 V. By using this electrochemical process, 5000 endotoxin units (EU) L^?1 and 1000 EU L^?1 were detected in a Tris-Ac buffer with a pH of 7.5 at 37 °C for reaction times of 1 h and 3 h, respectively. The concept of zymogen-based electrochemical sensors is expected to lead to the development of new biosensors.     

Recent advances in scanning electrochemical microscopic analysis and visualization on lithium-ion battery electrodes

Scanning electrochemical microscopy is a family of techniques that probes the local electrochemical surface environments with micrometer- and nanometer-scale space resolution and sub-picoampere chemical sensitivity. A recent growing trend uses these probes to investigate surface systems related to lithium-ion batteries, yielding a prodigious amount of new information. In this review, we give an overview of the recent progress on the scanning electrochemical microscopy and related techniques’ breakthroughs on lithium-ion battery electrodes research.     

Comparison of PAMAM-Au and PPI-Au nanocomposites and their catalytic activity for reduction of 4-nitrophenol

Dendrimer-Au nanocomposites are prepared in aqueous solutions using poly(amidoammine)dendrimers (PAMAM) (generation 2, 3, and 5) and poly(propyleneimine)dendrimers (PPI)(generation 2, 3, and 4) by wet chemical NaBH(4) method. The Au nanoparticles thus obtained are 2-4 nm in diameter for both dendrimers and no generation dependence on the particle size is observed, whereas the generations of the dendrimers are increased as stabilization of Au-nanoparticles is achieved with lower dendrimer concentrations. Studies of the reduction reaction of 4-nitrophenol using these nanocomposites show that the rate constants for the PAMAM dendrimers (generations 2 and 3) are higher than those for the PPI dendrimers (generations 2 and 3), while a distinct difference in the rate constants is not seen for the PAMAM dendrimer (generation 5) or the PPI dendrimer (generation 4). In addition, the rate constants for the reduction of 4-nitrophenol involving all the dendrimers decrease with increases in dendrimer concentrations.     

Magnetooptical Property of Sodium Borosilicate Gel-Glass Containing Bi-YIG Fine Particles

Composite materials which consist of ferro- or ferrimagnetic fine particles in a glass matrix are expected to have a large residual magnetization and coercive force because of their fine magnetic domain structure, and has potential for superior magneto-optical properties compared with single or polycrystalline materials. In this study, the sodium borosilicate (NBS) glass containing Bi-substituted yttrium iron garnet (Bi _x Y_3–x Fe₅O₁₂: BiYIG) fine particles, which show a superior magneto-optical effect, was prepared by the sol-gel method. BiYIG fine particles were stable in NBS gel-glass matrix during densification because the sintering temperature (580°C) of NBS gel was low enough to avoid pyrolysis of BiYIG and the reaction between BiYIG fine particles and the matrix. The Faraday rotation angle spectrum of the composite after deducting the contribution of the NBS glass matrix was intermediate between the reported ones of YIG and Bi_0.25YIG polycrystalline thin films. The change of the Faraday rotation angles of the composite with imposing magnetic field showed a hysteresis loop. It was in good agreement with that of the magnetization curve of the composite.     

A CO Adsorption Site Change Induced by Copper Substitution in a Ruthenium Catalyst for Enhanced CO Oxidation Activity

Ru is an important catalyst in many types of reactions. Specifically, Ru is well known as the best monometallic catalyst for oxidation of carbon monoxide (CO) and has been practically used in residential fuel cell systems. However, Ru is a minor metal, and the supply risk often causes violent fluctuations in the price of Ru. Performance‐improved and cost‐reduced solid‐solution alloy nanoparticles of the Cu‐Ru system for CO oxidation are now presented. Over the whole composition range, all of the Cu_xRu_1?x nanoparticles exhibit significantly enhanced CO oxidation activities, even at 70 at % of inexpensive Cu, compared to Ru nanoparticles. Only 5 at % replacement of Ru with Cu provided much better CO oxidation activity, and the maximum activity was achieved by 20 at % replacement of Ru by Cu. The origin of the high catalytic performance was found as CO site change by Cu substitution, which was investigated using in situ Fourier transform infrared spectra and theoretical calculations.     

Synthesis of poly(vinylene-arsine)s: alternating radical copolymerization of arsenic atomic biradical equivalent and phenylacetylene

Novel organoarsenic polymers, poly(vinylene-arsine)s, were synthesized by a free-radical alternating copolymerization of phenylacetylene with cyclooligoarsines as an atomic biradical equivalent. The polymerization between pentamethylpentacycloarsine (1a) or hexaphenylhexacycloarsine (1b) with phenylacetylene (2) in the presence of a catalytic amount of AIBN (in benzene; refluxing; for 12 h) gave the corresponding poly(vinylene-arsine)s. The obtained polymers were soluble in common organic solvents such as THF, chloroform, and benzene. From gel permeation chromatographic analysis (chloroform, PSt standards), the number-average molecular weights of the polymers from 1a and 1b were found to be 11500 and 3900, respectively. The structures of the polymers were supported by 1H and 13C NMR spectroscopies. The corresponding polymer was also obtained by irradiation of a benzene solution of 1a and 2 with xenon lamp at room temperature. After the polymer from 1a was stirred vigorously with 30% H2O2, the 1H NMR spectrum of the polymer showed the methyl proton that was assigned to As(III)-Me, suggesting the insensitivity of the trivalent state arsenic in the main chain to the oxidation. The structures and the molecular weights of the polymers were insensitive to the feed ratio of the monomers. This result indicates that the addition of the arsenic radical to phenylacetylene was a rate-determining step in the copolymerization.