Addition reactions of pendant epoxide group in poly(glycidyl methacrylate) with various active esters

Addition reactions of pendant epoxide groups in poly(glycidyl methacrylate) (PGMA) with various active esters such as 1-benzotriazolyl benzoate, S-(2-benzoxazolyl) thiobenzoate, S-(2-benzothiazolyl) thiobenzoate, 4-nitrophenyl benzoate (4NPB), and S-phenyl thiobenzoate (PTB) were carried out using quaternary salts as catalysts. The reactions of PGMA with those active esters proceeded in diglyme at 100°C for 24 h quantitatively without the formation of 2-hydroxyl pendant groups in the polymer when 10 mol % of tetraethylammonium bromide was used as a catalyst. Furthermore, it was found that the respective quaternary salts have higher catalytic activity than tertiary amines in the reaction of PGMA with the active esters, and the reaction of PGMA with 4NPB gave the corresponding polymer with the highest conversion by addition of tetrabutylammonium bromide as a catalyst, while tetraethylammonium chloride showed the highest activity for the reaction of PGMA with PTB. In addition, the rate of reaction of PGMA with 4NPB was proportional to third order kinetics of the epoxide concentration, the ester concentration and the catalyst concentration as follows: ?d[Epoxide]/dt = ?[Ester]/dt = k₃[Epoxide] [Ester] [Catalyst].     

Studies on the syntheses of analgesics. Part 50. Synthesis of optically active 2-[4-(1-oxo-2-isoindolinyl)phenyl]propanoic acid. [Studies on the syntheses of heterocyclic compounds. Part 742]

2-[4-(1-Oxo-2-isoindolinyl)phenyl]propanoic acid ( 1 ) having a potent analgesic and anti-inflammatory activity could be obtained by three methods, which were found to provide extremely useful ways for the synthesis of 1 from the industrial point of view. (E)- and (Z)-Isomers of 2-butenoic acid and oxiranecarboxylic acid derivatives as the intermedaites in the synthesis of 1 were separated and characterized. Furthermore, the optical resolution of (±)-2-[4-(1-oxo-2-isoindolinyl)phenyl]propanoic acid was successfully achieved using cinchonidine as a resolution reagent.     

Preparation,stability, reactivity and synthetic utility of a cadmium stabilized complex of difluoromethylene phosphonic acid ester

Diethyl bromodifluoromethyl phosphonate reacts readily with cadmium metal to form a stable cadmium complex. Depending on solvent, this functionalized organocadmium reagent exhibits stability for days to months. It reacts with a variety of electrophiles and serves as a synthetically useful source for the introduction of the difluoromethylene phosphonate group into organic compounds.The synthetic utility of a wide variety of fluoromethylene phosphonium ylides has been a major effort in our laboratory over the past several years [1]. The generation and capture of difluoromethylene ylides ($\text{1}$) as a general route to difluoromethylene olefins has been of especial interest to us [2]. In an effort to increase the nucleophilicity of the ylide, we have attempted to prepare the analogous phosphonate ylide ($\text{2}$). Although we have achieved modest success [3] by $\text{insitu}$ capture of ($\text{2}$) in the reaction of

sodium dialkyl phosphites with diethyl bromodifluoromethylphosphonate ($\text{3}$), attempts to pregenerate ($\text{2}$), either from diethyl difluoromethylphosphonate ($\text{4}$) or ($\text{3}$), have met with little success. ($\text{2}$) appears to have minimal stability even at low temperatures, and scale up processes of synthetic value would seem to be difficult.     

Isolation and crystal structure of a water-soluble iridium hydride: a robust and highly active catalyst for acid-catalyzed transfer hydrogenations of carbonyl compounds in acidic media

This paper reports the isolation and structural determination of a water-soluble hydride complex [Cp*Ir(III)(bpy)H](+) (1, Cp* = eta(5)-C(5)Me(5), bpy = 2,2'-bipyridine) that serves as a robust and highly active catalyst for acid-catalyzed transfer hydrogenations of carbonyl compounds at pH 2.0-3.0 at 70 degrees C. The catalyst 1 was synthesized from the reaction of a precatalyst [Cp*Ir(III)(bpy)(OH(2))](2+) (2) with hydrogen donors HCOOX (X = H or Na) in H(2)O under controlled conditions (2.0 < pH < 6.0, 25 degrees C) which avoid protonation of the hydrido ligand of 1 below pH ca. 1.0 and deprotonation of the aqua ligand of 2 above pH ca. 6.0 (pK(a) value of 2 = 6.6). X-ray analysis shows that complex 1 adopts a distorted octahedral geometry with the Ir atom coordinated by one eta(5)-Cp*, one bidentate bpy, and one terminal hydrido ligand that occupies a bond position. The isolation of 1 allowed us to investigate the robust ability of 1 in acidic media and reducing ability of 1 in the reaction with carbonyl compounds under both stoichiometric and catalytic conditions. The rate of the acid-catalyzed transfer hydrogenation is drastically dependent on pH of the solution, reaction temperature, and concentration of HCOOH. The effect of pH on the rate of the transfer hydrogenation is rationalized by the pH-dependent formation of 1 and activation process of the carbonyl compounds by protons. High turnover frequencies of the acid-catalyzed transfer hydrogenations at pH 2.0-3.0 are ascribed not only to nucleophilicity of 1 toward the carbonyl groups activated by protons but also to a protonic character of the hydrido ligand of 1 that inhibits the protonation of the hydrido ligand.     

Robust D-wave pairing correlations in a hole-doped spin-fermion model

Pairing correlations are studied numerically in a hole-doped spin-fermion model. Simulations performed on up to 12 x 12 clusters provide indications of D-wave superconductivity away from half-filling comparable to those of the 2D t-J model. The pairing correlations are the strongest in the direction perpendicular to the dynamic stripes that appear in the ground state at some densities. An optimal doping, where correlations are maximized, was observed at approximately 25% doping with an estimated T(c) approximately 100-200 K, in qualitative agreement with high-T(c) cuprates' phenomenology, while pairing correlations are suppressed by static stripe inhomogeneities.     

Effects of pressure and temperature on the solubility of monosodium L-glutamate monohydrate in water

Abstract

The solubility of monosodium L-glutamate monohydrate (MSG.H₂O) in water was measured at pressures in the range of 0.10-300MPa and 298.15K. The density of MSG solution at high concentrations and heat of solution at saturated concentration were also measured at atmospheric pressure. The solubility, m_s, increased with increasing pressure and the pressure coefficient, Θ_p, [?(? In m_s,? p)_T] at 0.10 MPa was (2.0 ± 0.1) × 10-¹⁰Pa-1. It agrees well with (2.1 ±0.2)× 10-¹⁰ Pa-¹ thermodynamically estimated using the partial molar volume, the activity coefficient of the solute in solution, and the molar volume of the crystal. The excellent agreement at 0.10MPa gives us confidence in the solubility data at higher pressures. The heat of solution data and other pertinent values were used to calculate the temperature coefficient of solubility, Θ_T [? (? In m_s/?(1/T))_p], by a thermodynamic equality. The resulting Θ_T compares well with the data directly measured by Ogawa.     

Annihilation and creation of rotating waves by a local light pulse in a protoplasmic droplet of the Physarum plasmodium

Pattern dynamics plays a fundamental role in biological functions from cell to organ in living systems, and the appearance of rotating waves can lead to pathological situations. Basic dynamics of rotating waves of contraction-relaxation activity under local perturbation is studied in a newly developed protoplasmic droplet of the Physarum plasmodium. A light pulse is applied by irradiating circularly a quarter of the droplet showing a single rotating wave. The oscillation pattern changes abruptly only when the irradiation is applied at a part of the droplet near the maximal contraction. The abrupt changes are as follows: the rotating wave disappears or is displaced when the irradiation area is very close to the center of the rotating wave, while new rotating waves are created when the irradiation area is far from the center of the rotating wave. These results support the hypothesis that the phase response curve has a discontinuous change (type 0 resetting) from delay to advance around the maximal contraction. The significance of the results is discussed in relation to “vulnerability” in excitable media and biological systems in general.     

Crystal growth of Co ferrite on fine acicular γ-Fe2O3 particles

Highly coercive magnetic powder was obtained by growing cobalt ferrite on the surface of γ-Fe₂O₃ particles in highly alkaline suspensions containing cobalt and ferrous ions in a Co/Fe molar ratio = $\text{1}\text{2}$. The mechanism of the growth and the structure of cobalt ferrite on γ-Fe₂O₃ were studied by X-ray diffraction and electron diffraction techniques. Results show that crystals of cobalt ferrite CoFe₂O₄ with a spinel type crystal structure of lattice constant 8.415 Å grew epitaxially on γ-Fe₂O₃. The acicular direction of the epitaxially grown Co-γ-Fe₂O₃ as well as γ-Fe₂O₃ was in the [$\text{1}$01] direction. It was found that from the lattice constant value and the half width of X-ray diffraction peaks, the lattice constant epitaxially grown Co γ-Fe₂O₃ may be attributed to two kinds of crystals, viz., seed γ-Fe₂O₃ ($\text{a = 8.35 ～ 8.37}\text{A}\text{?}$) which was partly reduced to Fe₃O₄, and surface layer CoFe₂O₄ ($\text{a = 8.415}\text{A}\text{?}$). The crystal growth in the interface between the seed crystals and the growth layer was affected by the crystal structure of the seed crystals. The lattice constant of CoFe₂O₄ which was located in the vicinity of the interface was almost equal to that of the seed crystals.     

Movement of liquid gallium dispersing low concentration of temperature sensitive magnetic particles under magnetic field

In this work, a temperature sensitive functional fluid was synthesized, and then its movement under the influence of magnetic field was investigated. Silica coated FeNbVB particles, prepared by chemical synthesis, were dispersed into liquid gallium, because they have a relatively high magnetization and a high temperature dependency. The synthesized functional fluid (solid fraction of 0.3 mass%) showed temperature dependence for magnetization within the testing temperature range between 298 and 353 K. The movement of gallium based fluid under the influence of the magnetic field with a magnetic field gradient was observed at various temperatures. We found that at 318 K, fluid displacement of the synthesized functional fluid is better when compared with the fluid displacement at 348 K.     

Achievement of a 920-MHz high resolution NMR

We have developed a 920-MHz NMR system and performed the proton NMR measurement of H(2)O and ethylbenzene using the superconducting magnet operating at 21.6 T (920 MHz for proton), which is the highest field produced by a superconducting NMR magnet in the persistent mode. From the NMR measurements, it is verified that both homogeneity and stability of the magnet have a specification sufficient for a high resolution NMR.