Surface Modification Strategy for Enhanced NO2 Capture in Metal–Organic Frameworks

The interaction strength of nitrogen dioxide (NO₂) with a set of 43 functionalized benzene molecules was investigated by performing density functional theory (DFT) calculations. The functional groups under study were strategically selected as potential modifications of the organic linker of existing metal–organic frameworks (MOFs) in order to enhance their uptake of NO₂ molecules. Among the functional groups considered, the highest interaction energy with NO₂ (5.4 kcal/mol) was found for phenyl hydrogen sulfate (-OSO₃H) at the RI-DSD-BLYP/def2-TZVPP level of theory—an interaction almost three times larger than the corresponding binding energy for non-functionalized benzene (2.0 kcal/mol). The groups with the strongest NO₂ interactions (-OSO₃H, -PO₃H₂, -OPO₃H₂) were selected for functionalizing the linker of IRMOF-8 and investigating the trend in their NO₂ uptake capacities with grand canonical Monte Carlo (GCMC) simulations at ambient temperature for a wide pressure range. The predicted isotherms show a profound enhancement of the NO₂ uptake with the introduction of the strongly-binding functional groups in the framework, rendering them promising modification candidates for improving the NO₂ uptake performance not only in MOFs but also in various other porous materials.     

Pressure dependence of zone-boundary phonons in AlSb

Abstract

We have investigated the effect of hydrostatic pressure on zone-boundary and other critical-point phonon frequencies of AlSb by second-order Raman scattering. A softening of the TA(X), TA(L) and (L/T)A([Sgrave]) modes has been observed for pressures up to the first phase transition at 7.7 GPa. The LA(L) as well as the optical TO at X-, L-, and LO at [Sgrave]-, X-points harden with increasing pressure. Mode Griineisen parameters of all the resolved modes were calculated. Reflectivity measurements indicate that the high pressure phase above 7.7 GPa is metallic.     

Millimeter-wave scattering from neutral and charged water droplets

We investigated 94 GHz millimeter-wave (MMW) scattering from neutral and charged water mist produced in the laboratory with an ultrasonic atomizer. Diffusion charging of the mist was accomplished with a negative ion generator (NIG). We observed increased forward- and backscattering of MMW from charged mist, as compared to MMW scattering from an uncharged mist. In order to interpret the experimental results, we developed a model based on classical electrodynamics theory of scattering from a dielectric sphere with diffusion-deposited mobile surface charge. In this approach, scattering and extinction cross-sections are calculated for a charged Rayleigh particle with effective dielectric constant consisting of the volume dielectric function of the neutral sphere and surface dielectric function due to the oscillation of the surface charge in the presence of applied electric field. For small droplets with radius smaller than 100 nm, this model predicts increased MMW scattering from charged mist, which is qualitatively consistent with the experimental observations. The objective of this work is to develop indirect remote sensing of radioactive gases via their charging action on atmospheric humid air.     

Finitary Spacetime Sheaves of Quantum Causal Sets: Curving Quantum Causality

A locally finite, causal, and quantal substitute for a locally Minkowskian principal fiber bundle of modules of Cartan differential forms over a bounded region X of a curved C -smooth spacetime manifold M with structure group G that of orthochronous Lorentz transformations L ⁺ := SO(1,3), is presented. is usually regarded as the kinematical structure of classical Lorentzian gravity when the latter is viewed as a Yang-Mills type of gauge theory of a sl(2, {})-valued connection 1-form . The mathematical structure employed to model this replacement of is a principal finitary spacetime sheaf of quantum causal sets with structure group G _n, which is a finitary version of the continuous group G of local symmetries of General Relativity, and a finitary Lie algebra g _n-valued connection 1-form on it, which is a section of its subsheaf . is physically interpreted as the dynamical field of a locally finite quantum causality, whereas its associated curvature as some sort of finitary and causal Lorentzian quantum gravity.     

Preparation of a psammaplysene-based library

A 28-member focused library, based on the pseudosymmetric template of the marine alkaloids psammaplysenes, was prepared from combinations of components that were, in turn, derived from 4-iodophenol.     

Contact angle hysteresis: surface morphology effects

Irradiation of metallic surfaces using ultra-short pulse laser results in a dual-scale structure. While metallic surfaces are superhydrophilic immediately after laser irradiation, prolonged exposure to air renders surfaces superhydrophobic due to surface reactions and deposition of carbonaceous materials onto the surface. In this work, we have fabricated a paraboloid microstructure, which is analyzed thermodynamically through the use of the Gibbs free energy to obtain the equilibrium contact angle and contact angle hysteresis. The effects of the geometrical details on maximizing the superhydrophobicity of the nanopatterned surface are also discussed in an attempt to design surfaces with desired and/or optimum wetting characteristics.     

Subgroup separability of graphs of abelian groups

In the present paper we give necessary and sufficient conditions for the subgroup separability of the fundamental group of a finite graph of groups with finitely generated abelian vertex groups.

     

Non-equilibrium gas-liquid transition model

A new rigorous mathematical model for evaporation/condensation, including boiling, has been proposed. A problem of phase transition and in particular evaporation/condensation is one of the most acute problems of modern technology with numerous applications in industry, such as: in refrigeration, distillation in chemical industry. It is very common to use equilibrium evaporation model, which assumes that concentrations of species in the gas phase is always at saturated condition. Such kind of approach can lead to significant errors, resulting in negative concentrations in complex computer simulations. In this work two analytical solution of simplified differential-algebraic system have been obtained. One of them was deduced using assumption that the process is isothermal and gas volume fraction is constant. In the second solution the assumption about gas volume fraction has been removed. The code for numerical solution of differential-algebraic system, using conservative scheme, has been developed. It was designed to solve both systems of equations with boiling and without. Numerical calculations of ammonia-water system with various initial conditions, which correspond to evaporation and/or condensation of both components, have been performed. It has been shown that, although system quickly evolves to quasi equilibrium state (the differences between current and equilibrium concentrations are small) it is necessary to use non-equilibrium evaporation model, to calculate accurately evaporation/condensation rates, and consequently all other dependent variables. (© 2008 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim)     

A partially mechanized system for the combustion of organic samples in a stream of oxygen with quantitative recovery of the trace elements

Summary A partially mechanized apparatus made of quartz (Trace-0-Mat) is described that permits the complete mineralization of up to 1 g of organic or biological solid samples. The combustion takes place in pure oxygen in a very small burning chamber (ca. 75 cm³) to subsequently determine metallic and nonmetallic trace elements (1 ng/g) with high reliability. The controllable incineration is started with an IR-radiator system. All volatile trace elements (e.g. Hg, Se, Te, As, Sb, I) are condensed together with the products of the combustion process in a cooling system filled with liquid nitrogen that is mounted on top of the burning chamber. Subsequent refluxing with a suitable acid in a quartz test tube mounted below the burning chamber collects both the volatilized elements from the cooled areas and nonvolatile elements in the ashing residue. The volume of the acid is about 2 ml.The recoveries of the elements following the decomposition process that takes 50–60 min for one sample was checked using 7 NBS-Standard Reference Materials for the elements B, Cr, Cu, Fe, Mn, Zn (ICP-emission spectrometry), Cd, Pb (ETA-AAS), Hg (AAS-cold vapor technique), As (AAS-hydride method) and Se (XRF). Very good agreement with the certified values was observed. This furnished evidence that this new and very general decomposition method is not only poor in blanks but also avoids substantially losses of the elements to be determined by volatilization, adsorption or even baking in the quartz surface. The easy handling of the apparatus offers the best premises for a reliable determination of trace elements in the g/g and ng/g range in most non-volatile organic matrices.

---

Teilmechanisiertes System zur Verbrennung organischer Proben im Sauerstoffstrom mit quantitativer Wiedergewinnung der Spurenelemente

Zusammenfassung Ein teilmechanisiertes aus Quarz bestehendes System (Trace-0-Mat) wird beschrieben, das die vollständige Mineralisation fester organischer oder biologischer Proben bis zu Mengen von 1 g gestattet. Die Verbrennung findet dabei in reinem Sauerstoff in einer sehr kleinen Verbrennungskammer (etwa 75 cm³) statt, so daß anschließend die metallischen und nichtmetallischen Spurenelemente mit hoher Zuverlässigkeit bestimmt werden können. Die steuerbare Veraschung wird durch ein System von IR-Strahlern gestartet. Alle flüchtigen Spurenelemente (z. B. Hg, Se, Te, As, Sb, I) werden zusammen mit den Verbrennungsprodukten in einem Kühlsystem kondensiert, das mit flüssigem Stickstoff gefüllt und über der Verbrennungskammer angeordnet ist. Die sich an den gekühlten Flächen befindlichen flüchtigen sowie die in der Asche vorhandenen nichtflüchtigen Elemente werden durch Rückflußbehandlung mit einer kleinen Säuremenge (2 ml) gelöst und in einem Quarzglas unterhalb der Verbrennungskammer gesammelt.Die Wiederfindung der Elemente nach dem Aufschlußprozeß (50–60 min) wurde mit Hilfe von 7 NBS-Referenzmaterialien für folgende Elemente geprüft: B, Cr, Cu, Fe, Mn, Zn (ICP-Emissionsspektrometrie), Cd, Pb (ETA-AAS), Hg (AAS-Kaltdampftechnik), As (AAS-Hydridmethode) und Se (Röntgenfluorescenz). Es ergab sich sehr gute Übereinstimmung mit den zertifizierten Werten. Diese neue und sehr allgemein anwendbare Aufschlußmethode weist nicht nur geringe Blindwerte auf, sondern vermeidet auch wesentliche Verluste der zu bestimmenden Elemente durch Verflüchtigung, Adsorption oder Zusammenbacken an der Quarzoberfläche. Durch die einfache Handhabung der Apparatur ist eine zuverlässige Bestimmung von Spurenelementen im g/g- und ng/g-Bereich für die meisten nichtflüchtigen organischen Matrices gewährleistet.