Separation and determination of m-phenoxybenzaldehyde reaction products by capillary gas chromatography

A capillary GC method employing an internal standard has been developed and successfully used for quantitative determination both of the raw materials used for the manufacture of m-phenoxybenzaldehyde and for the components of the reaction mixtures obtained at various stages of the development of the process. A complete analysis can be performed in a single temperature programmed run.     

The synthesis and ligand properties of the dihydro-bis-(1-indazolyl)borate anion

Summary Potassium dihydro-bis-(1-indazolyl)borate, synthesized from potassium borohydride and indazole, has been used as a reagent to yield complexes with copper(II), nickel(II), cobalt(II), manganese(II) and iron(III) ions. From i.r. spectral studies the ligand is uninegative and bidentate and coordination occurs through the nitrogen atom at position 2 of the indazole ring system in all cases. With the sole exception of the copper(II) complex, the nitrogen atom at position 1 is also involved in forming a bridge with an adjacent metal ion. On the basis of electronic spectral studies and magnetic susceptibility measurements a distorted square planar structure involving chlorine bridges has been proposed for the copper complex. An octahedral geometry with ligand bridges for all complexes is tentatively proposed and it appears that all are polymers.     

Molecular Characterization of Bacterial Isolates from Soil Samples and Evaluation of their Antibacterial Potential against MDRS

Some soil microbes, with their diverse inhabitance, biologically active metabolites, and endospore formation, gave them characteristic predominance and recognition among other microbial communities. The present study collected ten soil samples from green land, agricultural and marshy soil sites of Khyber Pakhtunkhwa, Pakistan. After culturing on described media, the bacterial isolates were identified through phenotypic, biochemical and phylogenetic analysis. Our phylogenetic analysis revealed three bacterial isolates, A6S7, A1S6, and A1S10, showing 99% nucleotides sequence similarity with Brevibacillus formosus, Bacillus Subtilis and Paenibacillus dendritiformis. The crude extract was prepared from bacterial isolates to assess the anti-bacterial potential against various targeted multidrug-resistant strains (MDRS), including Acinetobacter baumannii (ATCC 19606), Methicillin-resistant Staphylococcus aureus (MRSA) (BAA-1683), Klebsiella pneumoniae (ATCC 13883), Pseudomonas aeruginosa (BAA-2108), Staphylococcus aureus (ATCC 292013), Escherichia coli (ATCC25922) and Salmonella typhi (ATCC 14028). Our analysis revealed that all bacterial extracts possess activity against Gram-negative and Gram-positive bacteria at a concentration of 5 mg/mL, efficiently restricting the growth of E. coli compared with positive control ciprofloxacin. The study concluded that the identified species have the potential to produce antimicrobial compounds which can be used to control different microbial infections, especially MDRS. Moreover, the analysis of the bacterial extracts through GC-MS indicated the presence of different antimicrobial compounds such as propanoic acid, oxalic acid, phenol and hexadecanoic acid.     

Evaluation of Phytochemistry and Pharmacological Properties of Alnus nitida

In the current study, the anti-inflammatory and analgesic potential of Alnus nitida (leaves and fruits) was evaluated in the Sprague-Dawley rat. Traditionally, A. nitida was used for the treatment of inflammatory ailments. However, A. nitida leaves and fruits have not been yet reported regarding any potential medicinal effects. Leaves/fruits of A. nitida were extracted with methanol and fractionated to attain n-hexane, chloroform, ethyl acetate and aqueous fractions. These extracts were then evaluated for in vivo analgesic and anti-inflammatory potential. For in vivo anti-inflammatory activity, carrageenan-induced paw edema assay, Freunds’ complete adjuvant-induced edema, xylene-induced ear edema and histamine-induced paw edema models were used in rats, which showed significant (p < 0.01) reduction (70–80%) in edema in comparison of inflammatory controls. On other hand, for the analgesic assessment, hot plate assay and acetic acid-induced writhing tests were used, which showed a significant (p < 0.01) rise in latency time (40–60%) as compared with pain-induced controls. These results were comparable with standard drugs in a concentration-dependent manner and no mortality or toxicity was observed during all experiments. Then, for the identification of chemical constituents gas chromatography–mass spectrometry (GC-MS) analysis was performed, which indicated the presence of neophytadiene, 3,7,11,15-Tetramethyl-2-hexadecen-1-ol, phytol and vitamin E, justifying the use of A. nitida to treat inflammatory disorders.     

Microwave Irradiation and Glutamic Acid-Assisted Phytotreatment of Tannery and Surgical Industrial Wastewater by Sorghum

We investigated how different doses of microwave irradiation (MR) affect seed germination in Sorghum, including the level of remediation against textile and surgical wastewater (WW) by modulating biochemical and morpho-physiological mechanisms under glutamic acid (GA) application. The experiment was conducted to determine the impact of foliar-applied GA on Sorghum under wastewater conditions. Plants were treated with or without microwave irradiation (30 s, 2.45 GHz), GA (5 and 10 mM), and wastewater (0, 25, 50, and 100). Growth and photosynthetic pigments were significantly decreased in plants only treated with various concentrations of WW. GA significantly improved the plant growth characteristics both in MR-treated and -untreated plants compared with respective controls. HMs stress increased electrolyte leakage (EL), hydrogen peroxide (H₂O₂), and malondialdehyde (MDA) content; however, the GA chelation significantly improved the antioxidant enzymes activities such as ascorbate oxidase (APX), superoxide dismutase (SOD), peroxidase (POD), and catalase (CAT) both in MR-treated and -untreated plants under WW stress compared with respective controls. The results suggested that the MR-treated plants accumulate higher levels of HMs under GA addition in comparison to the WW-only-treated and MR-untreated plants. The maximum increase in Cd accumulation was observed in the range of 14–629% in the roots, 15–2964% in the stems, and 26–4020% in the leaves; the accumulation of Cu was 18–2757% in the roots, 15–4506% in the stems, and 23–4605% in the leaves; and the accumulation of Pb was 13–4122% in the roots, 21–3588% in the stems, and 21–4990% in the leaves under 10 mM GA and MR-treated plants. These findings confirmed that MR-treated sorghum plants had a higher capacity for HMs uptake under GA and could be used as a potential candidate for wastewater treatment.     

Siloxyaluminate and Siloxygallate Complexes as Models for Framework and Partially Hydrolyzed Framework Sites in Zeolites and Zeotypes

Anionic molecular models for nonhydrolyzed and partially hydrolyzed aluminum and gallium framework sites on silica, M[OSi(OtBu)₃]₄⁻ and HOM[OSi(OtBu)₃]₃⁻ (where M=Al or Ga), were synthesized from anionic chlorides Li{M[OSi(OtBu)₃]₃Cl} in salt metathesis reactions. Sequestration of lithium cations with [12]crown-4 afforded charge-separated ion pairs composed of monomeric anions M[OSi(OtBu)₃]₄⁻ with outer-sphere [([12]crown-4)₂Li]⁺ cations, and hydroxides {HOM[OSi(OtBu)₃]₃} with pendant [([12]crown-4)Li]⁺ cations. These molecular models were characterized by single-crystal X-ray diffraction, vibrational spectroscopy, mass spectrometry and NMR spectroscopy. Upon treatment of monomeric [([12]crown-4)Li]{HOM[OSi(OtBu)₃]₃} complexes with benzyl alcohol, benzyloxide complexes were formed, modeling a possible pathway for the formation of active sites for Meerwin–Ponndorf–Verley (MPV) transfer hydrogenations with Al/Ga-doped silica catalysts.     

Flow and heat transfer with prescribed skin friction in a rotating fluid

This paper investigates the rotating flow and heat transfer of a viscous fluid induced by a stretching surface. The nonlinear problem subject to a given skin friction at the boundary is solved. Analytic solution is obtained using homotopy analysis method. The velocity, temperature, and stretching velocity is calculated for different values of the rotation parameter (λ). The obtained results are compared with the well known results of rotating flow induced by a stretching surface by using four sets of boundary conditions. Copyright © 2011 John Wiley & Sons, Ltd.     

Cobalt titanate–cobalt oxide composite thin films deposited from heterobimetallic precursor

A single molecular heterobimetallic complex, [Co₂Ti(μ₃‐O)(TFA)₆(THF)₃] (1) [TFA = trifluoroacetate, THF = tetrahydrofuran], was synthesized, structurally and spectroscopically characterized and implemented as a single‐source precursor for the preparation of CoTiO₃–CoO composite thin films by aerosol‐assisted chemical vapour deposition (AACVD). The precursor complex was prepared by interaction of Co(OAc)₂.4H₂O [OAc = (CH₃COO^?)] with Ti(iso‐propoxide)₄ in the presence of trifluoroacetic acid in THF, and was analysed by melting point, CHN, FT‐IR, single‐crystal X‐ray diffraction and thermogravimetric analysis. The precursor complex thermally decomposed at 480 °C to give a residual mass corresponding to a CoTiO₃–CoO composite material. Good‐quality crystalline CoTiO₃–CoO composite thin films deposited at 500 °C by AACVD and characterized through powder X‐ray diffraction and scanning electron microscopy/energy‐dispersive X‐ray spectroscopy show that the crystallites have a rose‐flower‐like morphology with an average petal size in the range of 2–6 µm. Copyright © 2012 John Wiley & Sons, Ltd.     

Radiative phonon transport in silicon and collisional energy transfer in aluminum films due to laser short-pulse heating: Influence of laser pulse intensity on temperature distribution

Energy transfer across aluminum and silicon films through phonon transport is examined in line with the laser short-pulse interaction with the aluminum film. The modified two-equation model is incorporated to compute electron and lattice site temperatures in the aluminum film while phonon radiative transport is used to predict equilibrium temperature in the silicon film. The thermal boundary resistance is considered at the interface of the films in the analysis. The numerical scheme using the finite difference method is adopted to solve the governing equations of energy. It is found that lattice site temperature rise is gradual in the aluminum film in the late heating period. However, equilibrium temperature decay is sharp in the region of silicon interface during this period. The thermal boundary resistance lowers lattice site temperature considerably in the region of the aluminum interface.