Poly(L‐lysine) and clay nanocomposite with desired matrix secondary structure: Effects of polypeptide molecular weight

Nanocomposites (NC) were formed using cationic poly(L ‐lysine) (PLL), a semicrystalline polypeptide, that was reinforced by sodium montmorillonite (MMT) clay via solution intercalation technique. By varying solution conditions such as pH, temperature, and polypeptide concentration in the presence of clay platelets, the secondary structure of PLL was controllably altered into α‐helical, β‐sheet, and random coil. The high molecular weight polypeptide shows a strong propensity to fold into the β‐sheet structure when cast as films, irrespective of the initial secondary structure in solution. Nanocomposite local morphology confirms intercalated MMT platelets with PLL over a wide range of compositions. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 239–252, 2007.     

Effect of Y3+ substitution on the structural,dielectric, and electrical properties of nanosized ZnAl 2 O 4 spinel

In the present work, we have studied the structural, dielectric, and electrical properties of a series of nanosized $\mathrm{ZnAl}_{2-2x}\mathrm{Y}_{2x}\mathrm{O}_{4}$ ( $x = 0.00$ , 0.01, 0.02, 0.03, 0.04, 0.05, 0.07, and 0.10) system prepared by chemical coprecipitation method. Powder X-ray diffraction (XRD) was carried out to study the influence of $\mathrm{Y}^{3+}$ substitution on the crystal structure of these samples. High Resolution Transmission Electron Microscopy (HRTEM) images reveal the nanocrystalline nature of the samples. The Fourier Transform Infrared (FTIR) spectra confirmed the preference of $\mathrm{Y}^{3+}$ ions at the octahedral B site. The variation of dielectric constant and loss tangent (1 kHz to 1 MHz) at room temperature for all the samples show the normal behavior of spinel compounds. AC conductivity study reveals that the conduction is due to small polaron hopping. The electrical modulus analysis shows that nanocrystalline $\mathrm{ZnAl}_{2-2x}\mathrm{Y}_{2x}\mathrm{O}_{4}$ system exhibits non-Debye-type relaxation. The DC electrical resistivity measured in the temperature range 303–373 K was found to increase with temperature and yttrium content.     

Addition of multiwalled carbon nanotube and graphene nanosheet in cobalt oxide film for enhancement of capacitance in electrochemical capacitors

In order to enhance the capacitance of electrochemical capacitors, multiwalled carbon nanotubes (MWCNTs) and graphene nanosheets (GNS) were added to cobalt oxide (Co₃O₄) paste. The composite film based on Co₃O₄/MWCNT/GNS (95:4:1 wt%) exhibited a capacitance of 294 F/g while the capacitance of Co₃O₄/MWCNT (95:5 wt%) and pure Co₃O₄ film is 205 and 163 F/g, respectively. The enhanced capacitance of Co₃O₄/MWCNT/GNS composite film was attributed to the electrochemical contributions of the Co₃O₄ nanoparticle attached to the GNS as well as their significantly increased specific surface areas by MWCNTs. Furthermore, the composite films showed faradaic redox capacitive behavior to double-layer capacitive behavior due to the different nanostructures of the composites.     

Sex differences in the relationship between white matter microstructure and impulsivity in adolescents

Rapid maturational brain changes occur during adolescence--a time associated with risk-taking behaviors and improvements in cognition. The present study examined the relationship between white matter (WM) microstructure, impulsive behavior and response inhibition in female and male adolescents. Twenty-one healthy adolescents underwent diffusion tensor imaging using a 3.0-T magnetic resonance imaging system. Impulse control was assessed using the Bar-On Emotional Quotient Inventory, Youth Version. Response inhibition was assessed using the Stroop Color-Word Interference Test. Fractional anisotropy (FA), a measure of WM coherence, and trace, a measure of overall diffusivity, were determined from voxels manually placed in the midline and in the left and right forward-projecting arms of the genu and the splenium of the corpus callosum. Sex-specific differences were observed for the relationship between FA and impulsive behavior in the right anterior callosum for males and in the splenium for females. Males, compared to females, displayed significantly higher FA in the left WM region. Although trace was not associated with impulse control, trace in the genu (for females) and splenium (males and females) was associated with Stroop performance. Regional differences in trace also were evident, with lower values in the splenium observed than in all other regions. Although the latter significantly improved with age, no sex differences in impulse control or in Stroop performance were detected. The present findings provide supporting evidence for sex-related differences in the development of WM microstructure during adolescence. These data further suggest a neurobiological mechanism underlying some of the emotional and cognitive changes commonly observed in males versus females during the adolescent period.     

Homogenization approach for optimal design of perforated layer in acoustic wave propagation

Homogenization provides a reduced model of the acoustic wave propagation through a periodically perforated layer immersed in an inviscid fluid. The shape of the perforation influences some parameters of the non-local transmission condition. We developed and implemented numerically the sensitivity analysis for an optimal design of the perforation. (© 2011 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim)     

Thermodynamic assessment of Hg(II)-gibbsite interactions

As discrete particles and/or as surface coatings on other minerals in natural systems, aluminum hydroxides are efficient sinks for Hg(II). The Hg(II) adsorption on gibbsite was determined as a function of temperature (T), pH, and the type of background electrolytes, i.e., NaNO(3), NaClO(4), and NaCl. When the equilibration time t(E) approximately 2 h, the Hg(II) retention on gibbsite was found to be a reversible process, which was ascribed to adsorption. The Hg(II) adsorption capacity, i.e., Gamma(Hg(II)), varied with the type of electrolyte used in accordance with the following order: Gamma(NO(3))(Hg(II)) > or = Gamma(ClO(4))(Hg(II)) > or = Gamma(Cl)(Hg(II)). In all cases, the estimated thermodynamic parameters showed that the Hg(II) adsorption on gibbsite was endothermic and spontaneous. The Hg(II) adsorption data were quantified with the Langmuir or Hill, and Dublin-Radushkevick (DR), isotherms at all temperatures and acidity levels examined. Always, the Hg(II) adsorption data were in compliance with the DR model. However, the Hg(II) adsorption in NaNO(3) or NaClO(4) was interpreted in terms of the Langmuir model. When NaCl was used as electrolyte, the Hg(II) adsorption was modeled well with the Hill equation. The mean free energy values calculated from DR plots concluded that Hg(II)-gibbsite interactions are a result of chemical bonding.     

A simple CdS nanoparticles cascading approach for boosting N3 dye/ZnO nanoplates DSSCs overall performance

Enhanced photosensitization in presence of CdS nanoparticles is achieved in electrochemically deposited ZnO nanoplates and N3 loaded dye-sensitized solar cells. Chemically embedded CdS nanoparticles act as a sandwiching layer between ZnO nanoplates and dye molecules by overcoming current limiting serious Zn²⁺/dye insulating complex formation and CdS photo-corrosion issues. The X-ray diffraction and the scanning electron microscopy confirm the ZnO with vertically aligned nanoplates, perpendicular to the substrate surface. Amorphous CdS is monitored using electron dispersive X-ray analysis. The low and high resolution transmission electron microscope images confirm the presence of CdS nanoparticles over ZnO nanoplates which later is supported by an increase in optical absorbance and shift in band edge. About 400% increase in solar conversion efficiency with this cascade arrangement is achieved when compared with without CdS which could be fascinating while designing solid state solar cells in presence of suitable p-type layer.     

Pseudoceramines A-D, new antibacterial bromotyrosine alkaloids from the marine sponge Pseudoceratina sp

Bioassay-guided fractionation of the CH(2)Cl(2)/MeOH extract of the Australian marine sponge Pseudoceratina sp. resulted in the purification of four new bromotyrosine alkaloids, pseudoceramines A-D (1-4), along with a known natural product, spermatinamine (5). The structures of 1-5 were determined by spectroscopic methods. Pseudoceramines A (1) and B (2) feature a rare bromotyrosyl-spermine-bromotyrosyl sequence, and pseudoceramine C (3) is the first example of bromotyrosine coupled with an N-methyl derivative of spermidine. Compounds 1-5 were screened for inhibition of toxin secretion by the type III secretion (T3S) pathway in Yersinia pseudotuberculosis. Compounds 2 and 5 inhibited secretion of the Yersinia outer protein YopE (IC(50) = 19 and 6 μM, respectively) and the enzyme activity of YopH (IC(50) = 33 and 6 μM, respectively).     

Microcionamides A and B, bioactive peptides from the philippine sponge Clathria (Thalysias) abietina

Microcionamides A (1) and B (2) have been isolated from the Philippine marine sponge Clathria (Thalysias) abietina. These new linear peptides are cyclized via a cystine moiety and have their C-terminus blocked by a 2-phenylethylenamine group. Their total structures, including absolute stereochemistry, were determined by a combination of spectral and chemical methods. Compound 1 was shown to slowly isomerize about the C-36/C-37 double bond when stored in DMSO. Microcionamides A (1) and B (2) exhibited significant cytotoxicity against the human breast tumor cells lines MCF-7 and SKBR-3 and displayed inhibitory activity against Mycobacterium tuberculosis H(37)Ra.     

Neighboring Group Participation in Glycosylation Reactions by 2,6-Disubstituted 2-O-Benzoyl groups: A Mechanistic Investigation

Variable yields and glycosylation stereoselectivity were obtained for NIS/TfOH-medi- ated reaction of 4-methoxyphenyl 2,4,6-tetra-O-acetyl-β-D-galactopyranoside and thiogalactosides bearing acetyl, benzoyl, 2,6-dimethoxylbenzoyl, 2,4,6-trimethylbenzoyl, or 2,6-dichlorobenzoyl groups at the 2-positions and acetyl at the remainder. X-ray structures of 4-methylphenyl 2,3,4,6-tetra-O-(2,4,6-trimethylbenzoyl)-1-thio-β-D-galactopyr anoside and 4-methylphenyl 3,4-O-isopropylidene-2,6-di-O-(2,4,6-trimethylbenzoyl)-1-thio-β-D-galactopyranoside revealed slightly distorted ⁴ C ₁ chair conformations. Variable temperature NMR revealed that activation of 4-methylphenyl 2,3,4,6-tetra-O-(2,4,6-trimethylbenzoyl)-1-thio-β-D-galactopyranoside afforded only dioxolenium ion, whereas 4-methylphenyl 3,4,6-tri-O-acetyl-2-O-(2,4,6-trimethylbenzoyl)-1-thio-β-D-galactopyranoside gave a 1:1 mixture of dioxolenium ion and glycosyl triflate. However, the reaction intermediates formed from these deactivated donors do not influence the glycosylation stereoselectivity; instead, it is influenced by steric and electronic interactions at the transition states.