Static micromixers based on large-scale industrial mixer geometry

Mixing liquids at the micro-scale is difficult because the low Reynolds numbers in microchannels and in microreactors prohibit the use of conventional mixing techniques based on mechanical actuators and induce turbulence. Static mixers can be used to solve this mixing problem. This paper presents micromixers with geometries very close to conventional large-scale static mixers used in the chemical and food-processing industry. Two kinds of geometries have been studied. The first type is composed of a series of stationary rigid elements that form intersecting channels to split, rearrange and combine component streams. The second type is composed of a series of short helix elements arranged in pairs, each pair comprised of a right-handed and left-handed element arranged alternately in a pipe. Micromixers of both types have been designed by CAD and manufactured with the integral microstereolithography process, a new microfabrication technique that allows the manufacturing of complex three-dimensional objects in polymers. The realized mixers have been tested experimentally. Numerical simulations of these micromixers using the computational fluid dynamics (CFD) program FLUENT are used to evaluate the mixing efficiency. With a low pressure drop and good mixing efficiency these truly three-dimensional micromixers can be used for mixing of reactants or liquids containing cells in many microTAS applications.     

ON PHOTOREACTIONS OF ANTHRACENE IN SOLID MATRIX—I. PHOTODIMERIZATION

Abstract— The influence of a surrounding transparent matrix on the photochemical behavior of an absorbing solute has been investigated on the particular case of anthracene in KBr , KCl and in HBO₂ and B₂O₃ glasses. In KBr compressed powders, dianthracene formation occurs with a high yield, whereas it is forbidden or negligible for pure crystalline anthracene.
Experiments show that the anthracene molecules are associated in microcrystals and suggest that the dimerization reaction occurs at the interface between KBr and anthracene crystals.
Such an influence of the heterogeneity of the irradiated medium may have implications in photobiology where heterogeneous structures are the general rule.     

Wafer and epilayer improvement for integrated optics devices on InP: the ESPRIT project 2518

Ga _x In_1–x As _y P_1–y alloys lattice matched to InP substrates are currently used to fabricate optoelectronic and integrated optics devices. To achieve devices with high performances and high fabrication yield, the uniformity and reproducibility of the Ga _x In_1–x As _y P_1–y epitaxial layers (composition, thickness, doping, etc.) have become key parameters. These problems have been addressed in the frame of ESPRIT project 2518 and are presented in this paper. Several aspects have been considered starting from the optimization of InP substrates, the MOVPE growth of uniform GalnAsP layers, the material characterization to the validation of material uniformity on passive optical waveguides. Both scanning photoluminescence analysis and waveguide losses measurements performed on 2 inch wafers with a high lateral resolution have shown that high quality uniform GalnAsP layers can be obtained reproducibly on 2 InP substrates using a commercially available LP-MOCVD growth process. In particular, more than 60% of 36 mm long, 3m wide and 100m spaced rib waveguides exhibit losses below 0.8dBcm^–1.     

Pump−probe experiments at the TEMPO beamline using the low‐α operation mode of Synchrotron SOLEIL

The SOLEIL synchrotron radiation source is regularly operated in special filling modes dedicated to pump–probe experiments. Among others, the low‐α mode operation is characterized by shorter pulse duration and represents the natural bridge between 50 ps synchrotron pulses and femtosecond experiments. Here, the capabilities in low‐α mode of the experimental set‐ups developed at the TEMPO beamline to perform pump–probe experiments with soft X‐rays based on photoelectron or photon detection are presented. A 282 kHz repetition‐rate femtosecond laser is synchronized with the synchrotron radiation time structure to induce fast electronic and/or magnetic excitations. Detection is performed using a two‐dimensional space resolution plus time resolution detector based on microchannel plates equipped with a delay line. Results of time‐resolved photoelectron spectroscopy, circular dichroism and magnetic scattering experiments are reported, and their respective advantages and limitations in the framework of high‐time‐resolution pump–probe experiments compared and discussed.     

Methods and evaluation of frequency aging in distributed-feedback laser diodes for rubidium atomic clocks

Distributed-feedback laser diodes emitting at 780?nm have been evaluated, with respect to the aging of the injection current required for reaching the rubidium D2 resonance line. Results obtained for lasers operating in air and in vacuum for 9 months are reported. When operated at constant temperature, the laser current required for emission at the wavelength of the desired atomic resonance is found to decrease by 50 to 80?μA per month. The impact of this result on the lifetime and long-term performances of laser-pumped rubidium atomic clocks is discussed.     

InGaAs/Si3N4 interface obtained in ultrahigh vacuum multipolar plasma: In-situ control by ellipsometry and electrical characterization

A multipolar plasma passivation scheme controlled by in-situ ellipsometry has been developed to produce a high electrical quality InGaAs/Si₃N₄ interface. We have demonstrated the possibility to remove all native oxides at the InGaAs surface by heating the sample at 240°C, then using the action of a multipolar H₂ plasma at 185°C, without optical degradation of the surface. The passivation by a native nitride layer is then performed using a N₂ plasma, and Si₃N₄ is deposited. The treatment induces a reduction of the density of interface states N_ss(E), and also a change of the nature of these interface states as shown by a reduction in the capture cross section σ_n(E).     

Interchange-turbulence-based radial transport model for SOLPS-ITER: A COMPASS case study

Mean-field plasma edge transport codes such as SOLPS-ITER heavily rely on ad-hoc radial diffusion coefficients to approximately model anomalous transport. Such coefficients are experimentally determined and vary between different machines, and also depend on the operational regime and plasma location within the same device. Therefore, to match experimental data the modeller is required to manually tune several free parameters in expensive simulations, and the code's predictive capabilities are significantly downgraded. As a solution, a new model has been developed for SOLPS-ITER, solving an additional transport equation for the turbulent kinetic energy k, derived by consistently time-averaging the Braginskii equations, and including a diffusive closure for the anomalous particle flux. This closure model relates the anomalous diffusion coefficient to the local k value. The resulting equation structure and its closure are inspired by TOKAM2D isothermal interchange turbulence simulation results. Within this model, fewer and hopefully more universal free parameters are retained, thus improving the code's predictive capabilities. The new model has been tested on a COMPASS case for which upstream plasma profiles were available. Experimental data and a reference solution, obtained by matching the profiles through manual tuning of radial diffusivities, have been used to estimate the parameters of our new transport model. A ballooned particle diffusivity profile is retrieved by the new radial transport model, thanks to the proposed interchange drive. The obtained upstream profiles qualitatively agree with the experiment and prove the new model is a promising first attempt to be further refined.     

Soft swimming: exploiting deformable interfaces for low reynolds number locomotion

Reciprocal movement cannot be used for locomotion at low Reynolds number in an infinite fluid or near a rigid surface. Here we show that this limitation is relaxed for a body performing reciprocal motions near a deformable interface. Using physical arguments and scaling relationships, we show that the nonlinearities arising from reciprocal flow-induced interfacial deformation rectify the periodic motion of the swimmer, leading to locomotion. Such a strategy can be used to move toward, away from, and parallel to any deformable interface as long as the length scales involved are smaller than intrinsic scales, which we identify. A macroscale experiment of flapping motion near a free surface illustrates this new result.     

Heuristics for the multi-depot petrol station replenishment problem with time windows

In the multi-depot petrol station replenishment problem with time windows (MPSRPTW), the delivery of petroleum products stored in a number of different petroleum depots to a set of petrol distribution stations has to be optimized. Each depot has its own fleet of heterogeneous and compartmented tank trucks. Stations specify their demand by indicating the minimum and maximum quantities to be delivered for each ordered product and require the delivery within a predetermined time window. Several inter-related decisions must be made simultaneously in order to solve the problem. For this problem, the set of feasible routes to deliver all the demands, the departure depot for each route, the quantities of each product to be delivered, the assignment of these routes to trucks, the time schedule for each trip, and the loading of the ordered products to different tanks of the trucks used need to be determined. In this paper, we propose a mathematical model that selects, among a set of feasible trips, the subset that allows the delivery of all the demands while maximizing the overall daily net revenue. If this model is provided with all possible feasible trips, it determines the optimal solution for the corresponding MPSRPTW. However, since the number of such trips is often huge, we developed a procedure to generate a restricted set of promising feasible trips. Using this restricted set, the model produces a good but not necessarily optimal solution. Thus the proposed solution process can be seen as a heuristic. We report the results of the extensive numerical tests carried out to assess the performance of the proposed heuristic. In addition, we show that, for the special case of only one depot, the proposed heuristic outperforms a previously published solution method.