Diblock copolymers based on allyl methacrylate: Synthesis,characterization, and chemical modification

Different diblock copolymers constituted by one segment of a monomer supporting a reactive functional group, like allyl methacrylate (AMA), were synthesized by atom transfer radical polymerization (ATRP). Bromo‐terminated polymers, like polystyrene (PS), poly(methyl methacrylate) (PMMA), and poly(butyl acrylate) (PBA) were employed as macroinitiators to form the other blocks. Copolymerizations were carried out using copper chloride with N,N,N′,N″,N″‐pentamethyldiethylenetriamine (PMDETA) as the catalyst system in benzonitrile solution at 70 °C. At the early stage, the ATRP copolymerizations yielded well‐defined linear block copolymers. However, with the polymerization progress a change in the macromolecular architecture takes place due to the secondary reactions caused by the allylic groups, passing to a branched and/or star‐shaped structure until finally yielding gel at monomer conversion around 40% or higher. The block copolymers were characterized by means of size exclusion chromatography (SEC), ¹H NMR spectroscopy, and differential scanning calorimetry (DSC). In addition, one of these copolymers, specifically P(BA‐b‐AMA), was satisfactorily modified through osmylation reaction to obtain the subsequent amphiphilic diblock copolymer of P(BA‐b‐DHPMA), where DHPMA is 2,3‐dihydroxypropyl methacrylate; demonstrating the feasibility of side‐chain modification of the functional obtained copolymers. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 3538–3549, 2007     

Synthesis and characterization of functional gradient copolymers of allyl methacrylate and butyl acrylate

Functional spontaneous gradient copolymers of allyl methacrylate (A) and butyl acrylate (B) were synthesized via atom transfer radical polymerization. The copolymerization reactions were carried out in toluene solutions at 100 °C with methyl 2‐bromopropionate as the initiator and copper bromide with N,N,N′,N″,N″‐pentamethyldiethylenetriamine as the catalyst system. Different aspects of the statistical reaction copolymerizations, such as the kinetic behavior, crosslinking density, and gel fraction, were studied. The gel data were compared with Flory's gelation theory, and the sol fractions of the synthesized copolymers were characterized by size exclusion chromatography and nuclear magnetic resonance spectroscopy. The copolymer composition, demonstrating the gradient character of the copolymers, and the microstructure were analyzed. The experimental data agreed well with data calculated with the Mayo–Lewis terminal model and Bernoullian statistics, with monomer reactivity ratios of 2.58 ± 0.37 and 0.51 ± 0.05 for A and B, respectively, an isotacticity parameter for A of 0.24, and a coisotacticity parameter of 0.33. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 5304–5315, 2006     

Effect of excess halide on the palladium‐catalyzed insertion‐triggered radical copolymerization of methyl acrylate and 1‐hexene

[Pd₂(μ‐Cl)₂(C₆F₅)₂(tht)₂] ( 1 ) is a very efficient initiator of the radical polymerization of methyl acrylate, but it is not active in the polymerization of methyl methacrylate or in the copolymerization with 1‐hexene. The addition of an excess of NBu₄Cl to solutions of [Pd₂(μ‐Cl)₂(C₆F₅)₂(tht)₂] ( 1 ) provides an initiator system that copolymerizes methyl acrylate and 1‐hexene by an insertion‐triggered radical mechanism. Random copolymers are obtained with 11% incorporation of 1‐hexene in moderate yields (about 35%). Studies of the decomposition products obtained after the first insertion of methyl acrylate in the Pd? C₆F₅ bond of 1 show that the addition of excess halide in the presence of monomer favors the homolytic cleavage of the Pd? C bond, and the generation of the radicals that are active species in the polymerization, versus alternative evolution pathways. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 5682–5691, 2006     

Titanosilicates as Supports for an Enzymatic Alcoholysis Reaction

Novel [Cr^III(amp)(bipy)(Cl)] (1) (H₂amp = N-(hydroxyphenyl)salicyldimine; bipy = 2,2-bipyridyl) and [Cr^III(app)(bipy)(Cl)]⁺ (2) (H₂app = N-(hydroxyphenyl)pyridine-2-carboxaldimine; bipy = 2,2-bipyridyl) complexes have been synthesized and characterized by physico-chemical methods. Complexes 1 and 2 have been employed as catalysts in the oxidation of both saturated and unsaturated hydrocarbons using tert-butylhydroperoxide (t-BuOOH). The significance of the results with respect to oxo-functionalization of C-H bonds both in unsaturated and saturated hydrocarbons is noted.     

Elemental concentration in the cortex and hippocampus of Wistar rats by X-ray total reflection fluorescence with synchrotron radiation

Summary The study of trace element levels is of great importance due to their relevance in agingand several neurodegenerative diseases. This work compares the elemental concentrations in different postnatal ages and between the temporal cortex, entorhinal cortex and hippocampus from Wistar rats, using X-ray total reflection fluorescence with synchrotron radiation. Ten elements were determined in brain samples: Ti, Cr, Mn, Fe, Cu, Zn, (at trace level) and P, S, Cl and K (at major levels). The elements that increased with aging in cortical areas were: S, K, Fe, Cu and Zn. Ca and Zn levels decreased with advancing age in the hippocampus. In addition to this, Ti, Mn and Fe levels were more conspicuous in the entorhinal cortex.     

Determination of trace elements in tree rings ofPinus by neutron activation analysis

The elemental composition of pine trees as a function of age was achieved by the tree-ring method. By using instrumental neutron activation analysis, trace elements were determined in individual rings ofPinus elliottii var.elliottii of 32, 14 and 9 years, from an implanted forest ofPinus sp., Buri, São Paulo, far away from industrial pollution. Different components of the system such as needles, pith, bark, soil and litter were also analyzed for 18 elements (As, Br, Ce, Co, Cs, Eu, Fe, Hf, K, La, Mn, Na, Rb, Sc, Sm, Yb, Zn, and Zr). Al, B, Ba, Ca, Fe, K, Mg, and P concentrations were determined by atomic absorption and/or emission spectrometry (AAS; ICP-AES). Some elements have showed similar radial distribution of the concentration for the three ages. Abrupt concentration changes in the pith and ring-bark boundary corresponding to the first and last growth rings were observed.     

Ab initio analytical potential energy surface and quasiclassical trajectory study of the O(+)((4)S)+H(2)(X (1)Sigma(g) (+))-->OH(+)(X (3)Sigma(-))+H((2)S) reaction and isotopic variants

An analytical potential energy surface (PES) representation of the O(+)((4)S)+H(2)(X (1)Sigma(g) (+)) system was developed by fitting around 600 CCSD(T)/cc-pVQZ ab initio points. Rate constant calculations for this reaction and its isotopic variants (D(2) and HD) were performed using the quasiclassical trajectory (QCT) method, obtaining a good agreement with experimental data. Calculations conducted to determine the cross section of the title reaction, considering collision energies (E(T)) below 0.3 eV, also led to good accord with experiments. This PES appears to be suitable for kinetics and dynamics studies. Moreover, the QCT results show that, although the hypotheses of a widely used capture model are not satisfied, the resulting expression for the cross section can be applied within a suitable E(T) interval, due to errors cancellation. This could be a general situation regarding the application of this simple model to ion-molecule processes.     

Thermodynamics of liquid mixtures containing n-alkanes and strongly polar components: VE and C P E of mixtures with either pyridine or piperidine

Excess molar volumes V _E and excess molar heat capacities C _P ^/E at constant pressure have been obtained, as a function of mole fraction x₁, for several binary liquid mixtures belonging either to series I: pyridine+n-alkane (C_lH_2l+2), with l=7, 10, 14, 16, or series II: piperidine+n-alkane, with l=7, 8, 10, 12, 14. The instruments used were a vibrating-tube densimeter and a Picker flow microcalorimeter, respectively. V ^E of pyridine+n-heptane shows a S-shaped composition dependence with a small negative part in the region rich in pyridine (x₁>0.90). All the other systems show positive V ^E only. The excess volumes increase with increasing chain length l of the n-alkane. The excess molar heat capacities of the mixtures belonging to series II are all negative, except for a small positive part for piperidine+n-heptane in the region rich in piperidine (x₁>0.87). The C _P ^/E at the respective minima, C _P ^/E (x_1,min ), become more negative with increasing l, and the x_1,min values range from about 0.26 (l=7) to 0.39 (l=14). Most interestingly, mixtures of series I exhibit curves of C _P ^/E against x₁ with two minima and one maximum, the so-called W-shape curves.Dedicated to Professor A. Néckel on the occasion of his 65^th birthday. Communicated in part at the XVII^èmes Journées de Calorimétrie, d'Analyse Thermique et de Thermodynamique Chimique, Ferrara, Italy, 27–30 October, 1986.     

Synthesis and characterization of MCM-48 tubular membranes

MCM-48 membranes have been prepared on alumina supports of different pore sizes. A battery of characterization techniques has been used to study the physical properties and the quality of the membranes prepared. The highest quality membranes were prepared on supports with pore size of up to 60 nm. The MCM-48 membranes were tested in the separation of gas phase mixtures and a cyclohexane/O₂ selectivity higher than 270 was obtained. The selective separation of organic compounds from inert components is a result of the cooperative effects of capillary condensation in MCM-48 pores and of the specific interactions of the permeating compounds and the membrane material.