Application of N,N‐bis(diphenylphosphino)aniline palladium(II) complexes as pre‐catalysts in Heck coupling reactions

Palladium(II) complexes with N,N‐bis(diphenylphosphino)aniline ligands catalyse the Heck reaction between styrene and aryl bromides, affording stilbenes in good yield. The structures of two of the complexes used as pre‐catalysts have been determined by single‐crystal X‐ray diffraction. Copyright © 2007 John Wiley & Sons, Ltd.     

Comparative Study of the Ratio Spectra Derivative Spectrophotometry,Derivative Spectrophotometry and Vierordt's Method Appued to the Analysis of Lisinopril and Hydrochlorothiazide in Tablets

Abstract

Three new spectrophotometric methods are described for the determination of lisinopril and hydrochlorothiazide in their binary mixturer: First derivative spectrophotometry ratio spectra derivative and Vierordt's method. The procedures do not require any prior separation. In the derivative spectrophotometry, the dA/dλ values in the first derivative spectra of the mixture were measured at 269.6 nm for lisinopril and at 279.8 nm for hydrochlorothiazide. The calibration graphs were linear in the range 25.56–129.50 μg.ml^?1 for lisinopril and 10.60–139.80 μg.ml^?1 for hydrochlorothiazide. In ratio spectra derivative spectrophotometry, the calibration graphs for 15.68–129.50 μg.ml^?1 lisinopril and for 5.98–139.80 μg.ml^?1 hydrochlorothiazide were obtained by measuring the signals at 253.7 nm and 243.6 nm for lisinopril and at 280.1 nm and 270.8 nm for hydrochlorothiazide. In Vierordt's method, A¹ ₁ (1 %, 1 cm) values of lisinopril and hydrochlorothiazide were determined at 259.8 nm and 272.7 nm in the zero-order spectra. The quantity of both compounds were calculated by using the A¹ ₁ (1 %, 1cm) values. The methods were successfully applied to a pharmaceutical formulation for determination of both active compounds.     

Laser assisted removal of synthetic painting-conservation materials using UV radiation of ns and fs pulse duration: Morphological studies on model samples

In an effort to establish the optimal parameters for the cleaning of complex layers of polymers (mainly based on acrylics, vinyls, epoxys known as Elvacite, Laropal, Paraloid B72, among others) applied during past conservation treatments on the surface of wall paintings, laser cleaning tests were performed with particular emphasis on the plausible morphological modifications induced in the remaining polymeric material. Pulse duration effects were studied using laser systems of different pulse durations (ns and fs) at 248 nm. Prior to tests on real fragments from the Monumental Cemetery in Pisa (Italy) which were coated with different polymers, attention was focused on the study of model samples consisting of analogous polymer films cast on quartz disks. Ultraviolet irradiation is strongly absorbed by the studied materials both in ns and fs irradiation regimes. However, it is demonstrated that ultrashort laser pulses result in reduced morphological alterations in comparison to ns irradiation. In addition, the dependence of the observed alterations on the chemical composition of the consolidation materials in both regimes was examined. Most importantly, it was shown that in this specific conservation problem, an optimum cleaning process may rely not only on the minimization of laser-induced morphological changes but also on the exploitation of the conditions that favour the disruption of the adhesion between the synthetic material and the painting.     

Nanoscale zinc antimonides: synthesis and phase stability

Highly crystalline single-phase nanoparticles of the important thermoelectric materials Zn4Sb3 and ZnSb were prepared from solvochemically activated powders of elemental zinc and elemental antimony. Low-temperature reactions with reaction temperatures of 275-300 degrees C were applied using an excess of elemental zinc. The nanoscale thermoelectrics obtained were characterized by X-ray powder diffraction, transmission electron microscopy, and thermal analysis. nc-Zn4Sb3 showed particle sizes of 50-70 nm, whereas particle sizes of 15-20 nm were observed for nc-ZnSb. Calorimetric investigations showed an increased heat capacity, Cp, for nc-Zn4Sb3 with respect to the bulk material which could be reduced to the bulk value by annealing nc-Zn4Sb3 at 190 degrees C. Interestingly, nc-Zn4Sb3 showed exothermic decomposition into zinc-poorer ZnSn at 196 degrees C in an open system, indicating that Zn4Sb3 is metastable in nanocrystalline form at room temperature.     

A new binucleating macrocycle incorporating exocyclic oxime groups and its polynuclear complexes

A new binucleating macrocycle incorporating four exocyclic oxime groups, 6,6′-methylene-bis[1,12–di(hydroximino)-2,3;9,10–dibenzo-1,11–diaza-4,8–dithiacyclotridecane] (LH4) has been synthesized, its mononuclear CoIII and hetropolynuclear CoIII-PdII complexes have been prepared. LH4 and its metal complexes have been characterized by elemental analysis, 1H- and 13C-n.m.r., i.r. and mass spectral studies. The elemental analysis, stoichiometry and the spectroscopic data of the mononuclear CoIII complex indicate that the CoIII ions are coordinated by the oxime nitrogen atoms (C=N); PdII ions in the latter complex are coordinated through diaza-dithia moiety on the macrocycle. The mononuclear CoIII complex of LH4 has a 1:1 metal:ligand ratio. All spectral data support the proposed structure of LH4 and its complexes. This revised version was published online in June 2006 with corrections to the Cover Date.     

The Synthesis of Dibenzo[3n]crown-n by Novel Methods and their Cation Binding Studied by Fluorescence Spectroscopy. Part IV

The dibenzo[3n]crown-n were synthesised from1,2-bis(o-hydroxyphenoxy)ethane obtained from 1,2-bis(o-formylphenoxy)ethane via Bayer-Willigeroxidations with H₂O₂/CH₃COOH in good yields. The cyclic condensation of 1,2-bis(o-hydroxyphenoxy)ethanewith dichlorides, and ditosylates of polyethylene glycols in DMF/Me₂CO₃ gave the macrocyclesdibenzo[15]crown-5, dibenzo[18]crown-6, dibenzo[21]crown-7 anddibenzo[24]crown-8. The structures were identified using IR, mass, ¹H and ¹³C NMR spectroscopy. Therecognition of the molecules for the cations, Li⁺, Na⁺, K⁺, Rb⁺ and Zn²⁺were conducted quantitatively with steady state fluorescencespectroscopy. The 1:1 association constants in acetonitrileshowed a good relation of the appropriate size of the macrocyclic ether towards the fitting cationradii. Namely, dibenzo[15]crown-5 was the best for Li⁺ binding and more than 100 times better thanNa⁺ and K⁺. Dibenzo[21]crown-7 was excellent for Rb⁺ binding while K⁺ is 100 timesless preferred. The largest crown ether studied, dibenzo[24]crown-8, exhibited the order of binding power,Rb⁺ > K⁺ > Na⁺. Zn²⁺ displayed, however, a marked binding with only dibenzo[18]crown-6.p>     

Palladium‐catalyzed Suzuki reaction using 1,3‐dialkylbenzimidazol‐2‐ylidene ligands in aqueous media

From readily available starting compounds, six functionalized 1,3‐dialkylbenzimidazolium salts ( 2a–c and 4a–c ) have been prepared and characterized by conventional spectroscopic methods and elemental analyses. A highly effective, easy to handle, and environmentally benign process for palladium‐mediated Suzuki cross‐coupling was developed. The in situ prepared three‐component systems Pd(OAc)₂/1,3‐dialkylbenzimidazolium chlorides and Cs₂CO₃ catalyze quantitatively the Suzuki cross‐coupling of deactivated aryl chlorides. © 2004 Wiley Periodicals, Inc. Heteroatom Chem 15:419–423, 2004; Published online in Wiley InterScience (www.interscience.wiley.com). DOI 10.1002/hc.20034     

The Radical Anions of N,N′-Dicyanoquinone Diimines,a New Class of Electron Acceptors

The radical anions of 12 N,N′-dicyanoquinone diimines, a new class of electron acceptors, hace been characterized by their hyperfine data with the use of ESR and ENDOR spectroscopy. The largest coupling constant (0.30–0.45 mT), due to the two ¹⁴N nuclei in the exocyclic positions, gives rise to a conspicuous broadening of the peripheral ESR lines by an incomplete averaging of the hyperfine anisotropy. The most plausible interpretation of the experimental results for the radical anions of N,N′-dicyano- 1,4-benzoquinone diimine ( 1 ) and N,N′-Dicyano-9,10-anthraquinone diimine ( 9 ) is in terms of both ‘syn’- and ‘anti’-configurations contributing to the ESR and ENDOR spectra and having equal proton- and ¹⁴N-coupling constants. The π-spin distribution in the radical anions of N,N′-dicyanoquinone diimines is compared with those in the analogous ions of tetracyanoquinodimethanes and quinones.     

Platinum (II) N‐heterocyclic carbene complexes: Synthesis,characterization and cytotoxic properties

Platinum (II) complexes bearing N‐heterocyclic carbene (NHC) ligands have been widely used in catalytic chemistry, but there are very few reports of biological properties of this type of complexes. A series of [PtCl₂(NHC)(PEt₃)] complexes were synthesized. The structures of all compounds were characterized by ¹H‐NMR, ¹³C‐NMR, IR and elemental analysis techniques, which supported the proposed structures. The single crystal structures of complexes 1a and 1e were determined. The title complexes show slightly distorted square‐planar coordination around the platinum (II) metal center. The cytotoxic properties of the platinum (II)–NHC complexes have been assessed in various human cancer lines, including cisplatin‐sensitive and resistant cells. IC₅₀ values of these four complexes were determined by the MTS‐based assay on three human cell lines—brain (SHSY5Y), colon (HTC116) and liver (HEP3B). These complexes have been highlighted cancer therapeutic agent with unique structures and functions.     

The effect of intramolecular‐hydrogen bonds in the synthesis of novel imidates from a 13‐membered dioxadithia crown ether diester

The synthesis and structural properties of three novel imidates, 11,13‐bis‐(2‐amino‐ethylimino)‐1,10‐dioxa‐4,7‐dithiacyclotridecane ( 2 ), 11,13‐bis‐(3‐aminopropylimino)‐1,10‐dioxa‐4,7‐dithiacyclotridecane, ( 3 ) and 2,11‐dioxa‐5,8‐dithia‐13,16,19,22‐tetraazabicyclo[10.10.1]tricosa‐1(22),12‐diene, ( 4 ) have been described. These compounds were synthesized by treating 1,10‐dioxa‐4,7‐dithiacyclotridecane‐11,13‐diester ( 1 ) with the appropriate diamine under N₂ and their structures have been characterised by elemental analyses, ¹H‐ and ¹³C‐nmr, ir, and mass spectral studies. Elemental analyses and spectroscopic data support the proposed imidate structures. In addition, total energy and heat of formation (Figure 2) calculated for imidates 2a‐4a and 2b‐4b by the semiempirical AM1 calculations have shown that imidates 2b‐4b having intramolecular hydrogen bonds are more stable (5‐10 kcal/mol) than compounds 2a‐4a .