Rheological and Mechanical Characterization of Multi-Walled Carbon Nanotubes/Polypropylene Nanocomposites

The rheology and morphology of multi-walled carbon nanotube (MWNT)/polypropylene (PP) nanocomposites prepared via melt blending was investigated. The minor phase content of MWNT varied between 0.25 and 8 wt%. From morphological studies using a scanning electron microscopy technique a good dispersion of carbon nanotubes in the PP matrix was observed. The rheological studies were performed by a capillary rheometer, and mechanical properties of the nanocomposites were studied using a tensile and flexural tester. Both PP and its nanocomposites showed non-Newtonian behavior. At low shear rates the addition of MWNT content causes an increase in viscosity; however, viscosity is less sensitive to addition of MWNT content at higher shear rates. Flow activation energy for the nanocomposites was calculated using an Arrhenius type equation. From this calculation it was concluded that the temperature sensitivity of nanocomposites was increased by increasing of nanotube content. An increase in tensile and flexural moduli and Izod impact strength was also observed by increasing the MWNT content. From rheological and mechanical tests it was concluded that the mechanical and rheological percolation threshold is at 1.5 wt%.     

Stereochemical analysis of ferrocene and the uncertainty of fluorescence XAFS data

Methods for the quantification of statistically valid measures of the uncertainties associated with X‐ray absorption fine structure (XAFS) data obtained from dilute solutions using fluorescence measurements are developed. Experimental data obtained from 10 mM solutions of the organometallic compound ferrocene, Fe(C₅H₅)₂, are analysed within this framework and, following correction for various electronic and geometrical factors, give robust estimates of the standard errors of the individual measurements. The reliability of the refinement statistics of standard current XAFS structure approaches that do not include propagation of experimental uncertainties to assess subtle structural distortions is assessed in terms of refinements obtained for the staggered and eclipsed conformations of the C₅H₅ rings of ferrocene. Standard approaches (XFIT, IFEFFIT) give refinement statistics that appear to show strong, but opposite, preferences for the different conformations. Incorporation of experimental uncertainties into an IFEFFIT‐like analysis yield refinement statistics for the staggered and eclipsed forms of ferrocene which show a far more realistic preference for the eclipsed form which accurately reflects the reliability of the analysis. Moreover, the more strongly founded estimates of the refined parameter uncertainties allow more direct comparison with those obtained by other techniques. These XAFS‐based estimates of the bond distances have accuracies comparable with those obtained using single‐crystal diffraction techniques and are superior in terms of their use in comparisons of experimental and computed structures.     

Fabrication and Optimization of Poly(vinyl alcohol)/Zirconium Acetate Electrospun Nanofibers Using Taguchi Experimental Design

This paper presents an investigation regarding poly(vinyl alcohol)/zirconium acetate (organic–inorganic) (PVA/Zrace) nanofibers prepared by electrospinning which could be used as a precursor for fabricating ceramic metal oxide nanofibers. The effect of some processing variables, including polymer solution concentration, tip to collector distance and applied voltage of electrospinning, and the amount of Zrace and their interactions, on the diameter of the nanofibers were studied. Taguchi experimental design and a statistical analysis (ANOVA) were employed and the relationship between experimental conditions and yield levels determined. It was concluded that to obtain a narrow diameter distribution as well as maximum fiber fineness, a polymer concentration of 10 wt%, tip to collector distance of 18 cm and applied voltage of 20 kV variables were the optimum. Furthermore, it was also concluded that the ratio of Zrace (6 g) to PVA solution (10% wt) played an important role for achieving the minimum fiber diameter. Under these optimum conditions, the diameters of the electrospun composite fibers ranged from 86 nm to 381 nm with a diameter average of 193 nm. The experiments were done with Qualitek-4 software with “smaller is better” as the quality characteristics. The optimized conditions showed an improvement in the fibers diameter distribution and the average fibers diameter showed good resemblance with the result predicted using the Taguchi method and the Qualitek-4 software. The ANOVA results showed that all factors had significant effects on the fibers diameter and distribution, but the effect of PVA concentration and zirconium acetate were more significant than the other factors.     

Cyanide Biodegradation by Trichoderma harzianum and Cyanide Hydratase Network Analysis

Cyanide is a poisonous and dangerous chemical that binds to metals in metalloenzymes, especially cytochrome C oxidase and, thus, interferes with their functionalities. Different pathways and enzymes are involved during cyanide biodegradation, and cyanide hydratase is one of the enzymes that is involved in such a process. In this study, cyanide resistance and cyanide degradation were studied using 24 fungal strains in order to find the strain with the best capacity for cyanide bioremediation. To confirm the capacity of the tested strains, cyano-bioremediation and the presence of the gene that is responsible for the cyanide detoxification was assessed. From the tested organisms, Trichoderma harzianum (T. harzianum) had a significant capability to resist and degrade cyanide at a 15 mM concentration, where it achieved an efficiency of 75% in 7 days. The gene network analysis of enzymes that are involved in cyanide degradation revealed the involvement of cyanide hydratase, dipeptidase, carbon–nitrogen hydrolase-like protein, and ATP adenylyltransferase. This study revealed that T. harzianum was more efficient in degrading cyanide than the other tested fungal organisms, and molecular analysis confirmed the experimental observations.     

Second law of thermodynamics analysis for nanofluid turbulent flow inside a solar heater with the ribbed absorber plate

Journal of Thermal Analysis and Calorimetry - Employing rough surfaces and nanofluids in solar heater ducts are recognized as effective techniques to improve thermal performances of these devices....     

Immersed boundary—thermal lattice Boltzmann method for the moving simulation of non-isothermal elliptical particles

Journal of Thermal Analysis and Calorimetry - The study is concerned with the understanding of elliptical particles’ transport behavior coupled with heat transfer effects. A combination of...     

Organoplatinum(IV) tris-chelate complexes, each having a cyclic metallacarbonate ring: synthesis, characterization and kinetic studies of the formation

The complexes [Pt[(CH2)4](NN)], 1a (NN = 2,2'-bipyridine) and 1b (NN = 1,10-phenanthroline) react with 2,3-epoxypropylphenyl ether in the presence of CO2 to give tris-chelate platina(IV)cyclopentane complexes characterized by 1H and 13C NMR spectroscopy as [Pt[(CH2)4](CH2CHCH2OPhOCO2)(NN)], 2. The reactions proceed by the SN2 mechanism and the rates were independent of concentration of CO2. It is demonstrated that for 1a, the reaction proceeds 2.32 times faster than the similar reaction in which the dimethyl analog, [PtMe2(2,2'-bipyridine)], is used. The analog tris-chelate complex [Pt[(CH2)4](CH2CHPhOCO2)(phen)], 3a, was similarly synthesized.     

SMFs-supported Pd nanocatalysts in selective acetylene hydrogenation:Pore structure-dependent deactivation mechanism

In the present study,CNFs,ZnO and Al2O3 were deposited on the SMFs panels to investigate the deactivation mechanism of Pd-based catalysts in selective acetylene hydrogenation reaction.The examined supports were characterized by SEM,NH3-TPD and N2adsorption-desorption isotherms to indicate their intrinsic characteristics.Furthermore,in order to understand the mechanism of deactivation,the resulted green oil was characterized using FTIR and SIM DIS.FTIR results confirmed the presence of more unsaturated constituents and then,more branched hydrocarbons formed upon the reaction over alumina-supported catalyst in comparison with the ones supported on CNFs and ZnO,which in turn,could block the pores mouths.Besides the limited hydrogen transfer,N2 adsorption-desorption isotherms results supported that the lowest pore diameters of Al2O3/SMFs close to the surface led to fast deactivation,compared with the other catalysts,especially at higher temperatures.     

Enhancement of azo dyes removal efficiency by using LDH/Tris/Pd catalyst: Kinetic studies

LDH/Tris/Pd (CaAl‐layered double hydroxide/tris (hydroxymethyl)aminomethane/palladium) was synthesized and appraised for its catalytic activity towards the degradation of two selected azo dyes. The decolorization of azo dyes, acid red 18 (AR 18) and reactive yellow 15 (RY 15), requires considerably small amounts of synthesized catalyst. Kinetic studies show that the catalytic decolorization of these azo dyes follows the first order kinetic model. The reported method is simple and applicable; in addition, the stable catalyst can efficiently decolorize model azo dyes with good recyclability. Therefore, LDH/Tris/Pd can be accepted as the possible component for the utilization in wastewater treatment.     

Experimental Evaluation of the Additive Compounds Performance on Asphaltene Precipitation Using Automatic Titration Method

The use of soluble amphiphiles oil types provide the most practical and economical solution for crude oil treatment in order to control the asphaltene precipitation phenomenon. In this article, the inhibition performance of a number of new chemical additives to asphaltene precipitation is examined on two types of Iranian crude oil. An automatic titration method is used in experimental evaluation. The vegetable oil types (hazelnut, wheat germ, and walnut), organic acids (oleic and linoleic) and chemical additives (4-dodecylresorcinol and benzyl alcohol) displayed the highest capacity to inhibit asphaltene precipitation. A remarkable onset displacement is displayed by dodecyl resorcinol. The results also revealed that the vegetable oil have high potential in delaying asphaltene precipitation.