Controlled/living polymerization of 2‐(diethylamino)ethyl methacrylate and its block copolymer with tert‐butyl methacrylate by atom transfer radical polymerization

Polymerization of 2‐(diethylamino)ethyl methacrylate (DEAEMA) via homogeneous atom transfer radical polymerization under various reaction conditions is described. The effects of the initiators and solvents were examined. With 1,1,4,7,10,10‐hexamethyl triethylenetetramine/copper(I) chloride/p‐toluenesulfonyl chloride as the ligand/catalyst/initiator system in methanol, poly(DEAEMA) with a polydispersity index as low as 1.07 was synthesized. Kinetic studies demonstrated the polymerization was very well controlled and exhibited the living characteristic of the process. Well‐defined block copolymers of DEAEMA and tert‐butyl methacrylate (tBMA) were successfully synthesized. The copolymers could be synthesized with equally good results by starting with either p(DEAEMA) or p(tBMA) as the macroinitiators. However, only the macroinitiators terminated with chlorine should be used. The corresponding macroinitiators with bromine as a transferable group did not yield well‐defined copolymers. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 2688–2695, 2003     

Spectrophotometric determination of germanium with Catechol Violet and cetyltrimethylammonium bromide

A ternary complex between germanium, Catechol Violet (CV) and cetyltrimethylanunoniuni bromide is proposed for the determination of germanium. The stoichiometric ratio Ge:CV is 1:2. Beer's law is obeyed from 0.1 to 1.0 ppm of Ge. The method is highly selective. Interference from Sn(IV), Fe(III), Bi(III), Cr(VI), Mo(VI), V(V) and Sb(III) in mg amounts is eliminated by extracting the germanium into carbon tetrachloride from 9M HC1 and then stripping into water before the photometric determination.     

ToF-SIMS analysis of surface-anchored organometallic clusters

ToF-SIMS analysis of the organometallic cluster Os₃(μ-H)(CO)₁₀(μ-SCH₂CH₂SH) chemically attached onto a silver or gold surface, and of the cluster fragment Os₃(μ-H)(CO)₁₀(μ-OSi) on a silica surface, allows for identification of the surface organometallic species, and also gives information on its reactivity.     

Thermally responsive polymeric micellar nanoparticles self-assembled from cholesteryl end-capped random poly(N-isopropylacrylamide-co-N,N-dimethylacrylamide): synthesis, temperature-sensitivity, and morphologies

Cholesteryl end-capped thermally responsive amphiphilic polymers with two different hydrophobic/hydrophilic chain-length ratios were synthesized from the hydroxyl-terminated random poly(N-isopropylacrylamide-co-N,N-dimethylacrylamide) and cholesteryl chloroformate. The hydroxyl-terminated precursor polymers with narrow molecular weight distributions were synthesized by free-radical polymerization using 2-hydroxyethanethiol as a chain-transfer agent. The aqueous solutions of the cholesteryl end-capped copolymers exhibited reversible phase transitions at temperatures slightly above human body temperature, with the lower critical solution temperature values being 37.7 and 38.2 degrees C, respectively. The critical micelle concentration values of the two cholesteryl end-capped polymers were 9 and 25 mg/L, respectively. Polymeric micellar nanoparticles were prepared from the amphiphilic polymers using a dialysis method as well as a direct dissolution method. Transmission electron microscope studies showed that the micellar nanoparticles existed in different morphologies, including spherical, star-like, and cuboid shapes. Pyrene as a model hydrophobic compound could be readily encapsulated in these polymeric nanoparticles, at loading levels of 1.0 and 0.8 mg/g for the two cholesteryl end-capped polymers, respectively. The temperature sensitivity and unusual morphology of these novel polymeric nanoparticles would make an interesting drug delivery system.     

A power-law distribution for tenure lengths of sports managers

We show that the tenure lengths for managers of sport teams follow a power law distribution with an exponent between 2 and 3. We develop a simple theoretical model which replicates this result. The model demonstrates that the empirical phenomenon can be understood as the macroscopic outcome of pairwise interactions among managers in a league, threshold effects in managerial performance evaluation, competitive market forces, and luck at the microscopic level.     

A model for the thermal conductivity of nanofluids – the effect of interfacial layer

A model for predicting the effective thermal conductivity of nanofluids is proposed. It has been documented that the interfacial layer at the solid (particle)/liquid interface and particle size is one of the major mechanisms for enhancing the thermal conductivity of nanofluids. Comparing with other classical models, the proposed model takes into account some additional effects including volume fraction, thickness, thermal conductivity of the interfacial layer and particle size. The proposed model is found to be better than the existing models since the predicted effective thermal conductivity of different types of nanofluids are closer to the experimental results.     

Microstructural and mechanical analysis of Cu and Au interconnect on various bond pads

Effects of High Temperature Storage (HTS) and bonding toward microstructure change of intermetallic compound (IMC) at the wire bonding interface of 3 types of bond pad (Al, AlSiCu and NiPdAu) were presented in this paper. Optical and electron microscope analyses revealed that the IMC growth rate of samples under 175 and 200 °C HTS increased in the order of Al > AlSiCu > NiPdAu. Besides, higher HTS and bonding temperatures also promoted higher IMC thickness. The compositional study showed that higher HTS and bonding temperature developed rapid interdiffusion in bonding interface. In the mechanical ball shear test, a decrease of the shear force of Al and AlSiCu bond pads after 500 h HTS was believed due to poorly developed IMC at bonding interface. On the other hand, shear force degradation at 1000 h was due to excessive growth of IMC that in turn causes the formation of defects. For NiPdAu bond pad, increasing trend of shear force with HTS duration at 175 °C implied a good reliability of the Cu wire bonding. The rapid microscopic inspection on Cu wired Al bond pad under HTS 175 °C showed the IMC development from the periphery to the center of the ball bond. However, after 500 h voids started to develop until the crack was observed at 1000 h.     

Three‐dimensional visible‐light capsule enclosing perfect supersized darkness via antiresolution

Supersized darkness in three dimensions surrounded by all light in free space is demonstrated theoretically and experimentally in the visible regime. The object staying in the darkness is similar to staying in an empty light capsule because light just bypasses it by resorting to destructive interference. A binary‐optical system is designed and fabricated based on achieving antiresolution (AR), by which electromagnetic energy flux avoids and bends smoothly around a nearly perfect darkness region. AR remains an unexplored topic hitherto, in contrast to the super‐resolution for realizing high spatial resolution. This novel scheme replies on smearing out the point spread function and thus poses less stringent limitations upon the object's size and position since the created dark (zero‐field) area reach 8 orders of magnitude larger than λ² in cross‐sectional size. It functions very well with arbitrarily polarized beams in three dimensions, which is also frequency scalable in the whole electromagnetic spectrum.