Thermodynamic and physical properties of carbon tetrachloride + sulfolane mixtures

The solid + liquid phase diagram, drawn from thermal and dielectric measurements, is presented. It exibits a miscibility gap at 0.08 ≤ χ₂ ≤ 0.58, and two eutectics. The occurrence of a (likely 1:1) intermediate compound, which decomposes on melting into two immiscible liquids, is postulated. Mixed crystals are observed in the sulfolane richer region.Deviations of the liquid mixtures from ideality, positive in the case of viscosity and negative in the case of dielectric constants, are evidenced.     

An enriched damage-frictional cohesive-zone model incorporating stress multi-axiality

The paper presents an interphase cohesive zone model (CZM) incorporating stress multi-axiality devised to capture, by simplified micro-modeling, the influence of the in-plane strain and stress state in the mechanical response of the CZM. Moreover, the model is able to account for the Poisson-related effect in the interphase, which can play an important role in the modeling of heterogeneous masonry elements. From the constitutive point of view, the proposed formulation couples damage and friction by addressing a smooth transition from a quasi-brittle response to a residual frictional behavior described by a Coulomb law with unilateral contact. As in-plane stresses are accounted for, damage activation and evolution are governed by a Drucker–Prager law with linear softening. A predictor-corrector procedure based on a backward Euler scheme is detailed for integrating the nonlinear evolutive problem together with the related tangent operator which consistently linearizes the algorithmic strategy. This framework is embedded into a kinematically-enriched finite element interphase formulation incorporating stress multi-axiality. The modeling features of the resulting numerical tool are tested both at the local level, for the typical interphase point, and in meso-structural tests consisting of brick-mortar triplets, investigating the capability of the proposed model and numerical procedure to simulate the brick-mortar decohesion mechanism during confined slip tests.     

The Calculus of HLB Values of Polyoxyethylene Fatty Acid Esters from Quality Control Data

In this article, we obtained equations that permit us to calculate the hydrophilic-lipophilic balance (HLB) value of polyoxyethylene esters from quality control data of the raw materials (fatty acids and polyethylene glycol) and the finished product (surfactant). These data include the acid value of the fatty acid, the hydroxyl value of the polyethylene glycol, and the hydroxyl value of the surfactant. These calculations permit us, moreover, to know the mean molecular masses of fatty acids, of polyethylene glycol, of monoester and diester, and the proportion of polyoxyethylene monoester and polyoxyethylene diester.     

Supercritical Carbon Dioxide-Based Processes in Photocatalytic Applications

Conventional methods generally used to synthesize heterogeneous photocatalysts have some drawbacks, mainly the difficult control/preservation of catalysts’ morphology, size or structure, which strongly affect the photocatalytic activity. Supercritical carbon dioxide (scCO₂)-assisted techniques have recently been shown to be a promising approach to overcome these limitations, which are still a challenge. In addition, compared to traditional methods, these innovative techniques permit the synthesis of high-performance photocatalysts by reducing the use of toxic and polluting solvents and, consequently, the environmental impact of long-term catalyst preparation. Specifically, the versatility of scCO₂ allows to prepare catalysts with different structures (e.g., nanoparticles or metal-loaded supports) by several supercritical processes for the photocatalytic degradation of various compounds. This is the first updated review on the use of scCO₂-assisted techniques for photocatalytic applications. We hope this review provides useful information on different approaches and future perspectives.     

Electrodes/Electrolyte Interfaces in the Presence of a Surface‐Modified Photopolymer Electrolyte: Application in Dye‐Sensitized Solar Cells

Since hundreds of studies on photoanodes and cathodes show that the electrode/electrolyte interfaces represent a key aspect at the base of dye‐sensitized solar cell (DSSC) performances, it is reported here that these interfaces can be managed by a smart design of the spatial composition of quasi‐solid electrolytes. By means of a cheap, rapid, and green process of photoinduced polymerization, composition‐tailored polymer electrolyte membranes (PEMs) with siloxane‐enriched surfaces are prepared, and their properties are thoroughly described. When assembled in DSSCs, the interfacial action promoted by the composition‐tailored PEMs enhances the photocurrent and fill factor values, thus increasing the global photovoltaic conversion efficiency with respect to the non‐modified PEMs. Moreover, the presence of the siloxane‐chain‐enriched surface increases the hydrophobicity and reduces the water vapor permeation into the device, thus enhancing the cell′s durability.     

Collection of atmospheric hydrogen chloride in industrial environments by means of alumina sampling tubes

Atmospheric hydrogen chloride is sampled by means of glass tubes containing alumina (15–30 mesh). The analyte is then extracted by washing with 0.5 M potassium nitrate and water and is quantified potentiometrically with a chloride-selective electrode. The detection limit of the method is 0.15 μmol of hydrogen chloride, corresponding to 0.18 ppm (v/v) in a 20-l air sample. The sampling method is tested in the concentration range 0.78–32 ppm, with recoveries in the range 99.2–93.7% and standard deviations of 7.6–1.0%, which is appropriate for the threshold limit value of 5 ppm in industrial environments.     

Mouse brain expression patterns of <Emphasis Type="Italic">Spg7</Emphasis>, <Emphasis Type="Italic">Afg3l1</Emphasis>, and <Emphasis Type="Italic">Afg3l2</Emphasis> transcripts,encoding for the mitochondrial <Emphasis Type="Italic">m</Emphasis>-AAA protease

Background  

The m-AAA (ATPases Associated with a variety of cellular Activities) is an evolutionary conserved metalloprotease complex located in the internal mitochondrial membrane. In the mouse, it is a hetero-oligomer variably formed by the Spg7, Afg3l1, and Afg3l2 encoded proteins, or a homo-oligomer formed by either Afg3l1 or Afg3l2. In humans, AFG3L2 and SPG7 genes are conserved, whereas AFG3L1 became a pseudogene. Both AFG3L2 and SPG7 are involved in a neurodegenerative disease, namely the autosomal dominant spinocerebellar ataxia SCA28 and a recessive form of spastic paraplegia, respectively.     

Surface growth mechanisms and structural faulting in the growth of large single and spherulitic titanosilicate ETS-4 crystals

Morphological, surface and crystallographic analyses of titanosilicate ETS-4 products, with diverse habits ranging from spherulitic particles composed of submicron crystallites to large single crystals, are presented. Pole figures revealed that crystal surfaces with a-, b- and c- axes corresponded to 110, 010 and 001 directions, respectively. Thus, technologically important 8-membered ring pores and titania chains in ETS-4 run along the b-axis of single crystals and terminate at the smallest crystal face. Height of the spiral growth steps observed on 1 0 0 and 0 0 1 surfaces corresponded to the interplanar spacings associated with their crystallographic orientation, and is equivalent to the thickness of building units that form the ETS-4 framework. Data suggest that the more viscous synthesis mixtures, with a large driving force for growth, increased the two- and three-dimensional nucleation, while limiting the transport of nutrients to the growth surface. These conditions increase the tendency for stacking fault formation on 1 0 0 surfaces and small angle branching, which eventually results in spherulitic growth. The growth of high quality ETS-4 single crystals (from less viscous synthesis mixtures) occurred at lower surface nucleation rates. Data suggest that these high quality, large crystals grew due to one-dimensional nucleation at spiral hillocks, and indicate that under these conditions un-faulted growth is preferred.     

T3P-Promoted Synthesis of a Series of 2-Aryl-3-phenyl-2,3-dihydro-4H-pyrido[3,2-e][1,3]thiazin-4-ones and Their Activity against the Kinetoplastid Parasite Trypanosoma brucei

A series of fourteen 2-aryl-3-phenyl-2,3-dihydro-4H-pyrido[3,2-e][1,3]thiazin-4-ones was prepared at room temperature by T3P-mediated cyclization of N-phenyl-C-aryl imines with thionicotinic acid, two difficult substrates. The reactions were operationally simple, did not require specialized equipment or anhydrous solvents, could be performed as either two or three component reactions, and gave moderate–good yields as high as 63%. This provides ready access to N-phenyl compounds in this family, which have been generally difficult to prepare. As part of the study, the first crystal structure of neutral thionicotinic acid is also reported, and showed the molecule to be in the form of the thione tautomer. Additionally, the synthesized compounds were tested against T. brucei, the causative agent of Human African Sleeping Sickness. Screening at 50 µM concentration showed that five of the compounds strongly inhibited growth and killed parasites.