Physical properties of glycosaminoglycan hydrogels

The chemical composition of glycosaminoglycan (GAG) hydrogels was found to have a profound effect on the physical properties of gels. Hyaluronan (HA) and chondroitin sulfate (CS) were each modified with adipic dihydrazide (ADH) with carbodiimide chemistry. The resulting polymer was crosslinked with various concentrations of poly(ethylene glycol) dialdehyde (PEG‐diald) to produce a series of hydrogels. The physical properties of these GAG hydrogels varied in a concentration‐dependent fashion. Maximal crosslinking was observed at a theoretical crosslinking of 50% for the HA‐ADH‐PEG‐diald hydrogels and 75% for the CS‐ADH‐PEG‐diald hydrogels. Adding PEG‐diald beyond the optimum for crosslinking prolonged the in vitro enzymatic degradation time of the hydrogels. The swelling of the crosslinked GAG hydrogels was correlated with the amount of PEG‐diald used rather than with the crosslinking density. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 4344–4356, 2004     

On the pivot structure for the weighing matrix W(12,11)

In the present article we concentrate our study on the growth problem for the weighing matrix W(12,11) and show that the unique W(12,11) has three pivot structures. An improved algorithm for extending a k × k (0,+,-) matrix to a W(n,n-1), if possible, has been developed to simplify the proof. For the implementation of the algorithm special emphasis is given to the notions of data structures and parallel processing.     

Four unit linking groups IV. Liquid crystals of positive dielectric anisotropy

Three separate series of new materials of weak to strongly positive dielectric anisotropy have been prepared. Each series contains four sub-sets of materials each incorporating a different four unit linking group (i.e., C₄H₈, C₄H₆, C₃H₆O and C₃H₄O) and the same series of end groups (i.e. F, CN and OCF₃) in various substitution patterns. The synthesis and liquid crystal transition temperatures of these novel substances are described and compared with those of the corresponding materials incorporating standard central linkages (i.e.-, C₂H₄, CH₂O, COO). The effect of an additional trans carbon-carbon double bond in the terminal alkyl chain and in the central linking unit has also been studied.     

Effect of stoichiometry on liquid crystalline supramolecular polymers formed with complementary nucleobase pair interactions

We report herein studies on the liquid crystalline behavior of a series of supramolecular materials that contain different ratios of two complementary symmetrically-substituted alkoxy-bis(phenylethynyl)benzene AA- and BB-type monomers. One monomer has thymine units placed at either end of the rigid mesogenic core, while the other has N⁶-(4-methoxybenzoyl)-adenine units placed on the ends. Differential scanning calorimetric and polarized optical microscopy studies have been carried out on these systems. These studies show that the material's behavior is strongly dependent on its thermal history. As a result, the materials can exhibit, on heating, either a liquid crystalline phase, a crystalline phase, or the coexistence of crystalline and liquid crystalline regions. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 5049–5059, 2006     

Liposomes as signal amplification reagents for bioassays in microfluidic channels

Liposomes with encapsulated carboxyfluorescein were used in an affinity-based assay to provide signal amplification for small-volume fluorescence measurements. Microfluidic channels were fabricated by imprinting in a plastic substrate material, poly(ethylene terephthalate glycol) (PETG), using a silicon template imprinting tool. Streptavidin was linked to the surface through biotinylated-protein for effective immobilization with minimal nonspecific adsorption of the liposome reagent. Lipids derivatized with biotin were incorporated into the liposome membrane to make the liposomes reactive for affinity assays. Specific binding of the liposomes to microchannel walls, dependence of binding on incubation time, and nonspecific adsorption of the liposome reagent were evaluated. The results of a competitive assay employing liposomes in the microchannels are presented.     

Chromatographic studies of corrosion sites in metallic materials

Many types of corrosion phenomena are controlled by the ionic composition of a small volume of solution at the surface. Localized corrosion and atmospheric corrosion are two examples in which < 1 μl of solution can cause dramatic damage. Ion chromatographic (IC) techniques have been used to analyze these solutions in order to gain a better understanding of the mechanisms which govern them. Two examples are presented. The presence of minor alloying elements at localized corrosion sites in two aluminum alloys has been demonstrated, indicating non-stoichiometric dissolution of the alloy during localized corrosion. In addition, IC analysis allowed the determination of the species responsible for the atmospheric corrosion failure of electrical connectors, including their likely origin.     

Mass spectrometry analysis of synthetically myristoylated peptides

Myristoylpeptides were synthesized in order to determine if a neutral loss of 210 Da, C14H26O (the mass of the myristoyl moiety), was universal and observable by both liquid chromatography electrospray ionization quadrupole ion trap (LC-ESI-QIT) and matrix-assisted laser desorption/ionization time-of-flight time-of-flight (MALDI-ToF/ToF) mass spectrometry. Myristoylation was successfully introduced on the N-terminus, internally on the amino group of lysine and arginine. Larger peptides and the arginine compounds needed elevated temperatures for myristoylation. To our knowledge, this is the first report of a chemically-synthesized myristoylated arginine in a peptide. Collision energy studies for the LC-ESI-QIT instrument showed that modified peptides and a loss of 210 Da could be detected under commonly used conditions (energy level between 30 and 42%) with picomole amounts of sample. The loss of myristoyl moiety is observed on the MALDI-Tof/Tof mass spectrometer as well. Due to the hydrophobic properties of the myristoyl moiety, it is not surprising that the modified peptides all formed at least dimers, and in some cases trimers. We were also able to distinguish a mixture of two mono-myristoylated peptides. MS3 data from the LC-ESI-QIT instrument on a di-myristoylated peptide indicates the loss of 210 Da at either the N-terminus or lysine. We were also able to analyze a mixture of modified and unmodified peptides on the MALDI-ToF/ToF instrument. The data presented in this paper demonstrates the constant neutral loss of the 210 Da, C14H26O, from both N-terminally and internally myristoylated peptides can be identified unambiguously using LC-ESI-QIT or MALDI-ToF/ToF mass spectrometers. This will be a useful tool in determining the myristoylation status of candidate proteins after enzyme digestion, and in elucidating the modification sites of internal myristoyl proteins.     

CHEMILUMINESCENCE AND ENERGY TRANSFER FROM SINGLET OXYGEN PAIRS

Abstract— Chemiluminescence and photochemiluminescence of systems generating excited (singlet) molecular oxygen has been studied at low temperature in fluid media. A possible interpretation is proposed: that dimers of singlet oxygen are directly or indirectly responsible for the observed emission, the species [¹δg +¹σg⁺] predominating. Energy transfer to a fluorescent molecule is possible only when conditions of spectral overlap, required for transfer by inductive resonance, are fulfilled. Evidence is also presented for the formation of a transient complex between oxygen and a sensitiser or acceptor molecule [S…O₂], which is the precursor of singlet oxygen in these systems. However, other possible mechanisms cannot be excluded.     

Spirobicyclic diamines. Part 2: Synthesis of homochiral diastereoisomeric proline derived [4.4]-spirolactams

l-Proline derived diastereoisomeric [4.4]-spirolactams have been prepared by a reductive-amination reaction of (R)- or (S)-alanine methyl ester, followed by thermal cyclisation of the resulting amine onto the proline ester group in refluxing toluene. Under similar conditions (R)- or (S)-phenylalanine methyl ester gave no cyclisation products, while R- or S-α-methylbenzylamine required treatment with NaNH₂ in refluxing toluene to induce cyclisation giving diastereoisomeric [4.4]-spirolactams.