Photorefractive effect in the relaxor ferroelectric material 0.91Pb(Zn1/3Nb2/3)O3-0.09PbTiO3

The photorefractive effect in a nominally undoped 0.91Pb(Zn1/3Nb2/3)O3-0.09PbTiO3 single crystal is measured. We report what is, to our knowledge, the first observation of the photorefractive effect in Pb-based relaxor ferroelectric crystals. The crystal is grown by the flux solution method. Then it is cut into a 2 mm x 4 mm x 8 mm piece and electrically poled along the [111] direction. The coupling constant of the two-wave mixing is 17 cm(-1), and the normalized time constant under 1-W/cm(2) illumination is 12 s at a wave-length of 476 nm. The effective trap density is calculated as 5 x 10(16) cm(-3) from the Debye screening length under the assumption of Kukhtarev's band-transport model. The dominant carrier is identified to be holes from the direction of two-wave mixing energy transfer.     

Instrumental Requirements for Non-Invasive Blood Glucose Measurement Using NIR Spectroscopy

The magnitude of spectral change in blood glucose measurements with diffuse reflectance spectroscopy is investigated. Spectral change is estimated by simulation of light propagation in skin tissue and measurements of absorbance spectra of aqueous glucose solution. Required sensitivity of spectrophotometers for monitoring change in the blood glucose concentration as small as 10 mg/dL has been obtained using the estimated change in the absorbance spectrum and mean pathlength of light in tissue.     

Local chemical state change in Co–O resistance random access memory

Kelvin probe force microscopy (KFM) and conductive atomic force microscopy (C‐AFM) together with micro X‐ray photoelectron spectroscopy (XPS) were performed for the stacking structure comprising of the transition metal oxide Co–O and metal electrode, which exhibits large reproducible resistance switching. The application of the external voltage by the C‐AFM cantilever decreases the resistance of Co–O, which well accords with the non‐polar forming process observed in the Pt/Co–O/Pt trilayer, known as the candidate of resistance random access memory (ReRAM). Furthermore, the KFM and micro XPS experimentally revealed that the local reductive reaction of Co–O possibly nucleates the defect related energy levels which dominates the current conduction in the low resistance state. (© 2008 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Piezoelectric immunosensor for bisphenol A based on signal enhancing step with 2-methacrolyloxyethyl phosphorylcholine polymeric nanoparticle

An immunoassay in which BPA competed with a BPA-horseradish peroxidase conjugate for binding to anti-BPA antibodies, coupled to a piezoelectric (PZ) immunosensor, was able to detect 0.1 ng mL(-1) BPA. To enhance the sensitivity of the assay, we tested nanoparticles approximately 200 nm in diameter, coupled to anti-BPA antibodies, to increase the mass change on the surface of the immunosensor and thereby increase the frequency shift detected. This second step, using nanoparticles coated with anti-BPA antibodies, improved the sensitivity of the assay by approximately eight times at BPA concentrations below 10 ng mL(-1). Field emission-scanning electron microscopy (FE-SEM) showed that polymeric 2-methacrolyloxyethyl phosphorylcholine (MPC) nanoparticles coupled to antibodies remained monodisperse on the surface of the immunosensor and therefore produced stable signals in the immunosensors. Since the frequency shift detected in the assay mainly originated from the mass change on the surface of the PZ crystal, the colloidal stability of the antibody-conjugated particles used in the enhancement step played an extremely important role in achieving a stable and highly sensitive signal.     

Selective growth of ag nanowires on Si(111) surfaces by electroless deposition

Electroless deposition of Ag on atomically flat H-terminated Si(111) surfaces in aqueous alkaline solutions containing Ag ions produced two different sizes of Ag nanowires along atomic step edges: (1) a narrow nanowire of 10 nm in width and 0.5 nm in height and (2) a wide nanowire of 35 nm in width and 11 nm in height. The narrow and wide nanowires were formed by immersion in the solutions containing less than 1 ppb and 8 ppm dissolved-oxygen concentrations, respectively. This result indicates that the dissolved oxygen initiates the formation of Ag nucleation sites and that the fabrication method has a possibility of controlling the size of Ag nanowires.     

Fast image enlargement using predefined codebook and eigenspace backprojection for lost pixel

In this paper, a new image enlargement method applying the backprojection for lost pixel (BPLP) to the predefined codebook-based method is proposed. BPLP is a method for image restoration. In BPLP, the eigenspace reflecting the characteristics of an input image is generated from the remained pixels and is used to restore the missing pixels. In the proposed method, the eigenspace is replaced by one generated from the predefined codebook (PDC). PDC represents edge-blurring properties in a small image patch and consists of pairs of low- and high-frequency image patches on various edge patterns. By replacing the PDC-based estimation of lost high-frequency components with BPLP, a fast image enlargement method retaining its performance can be developed. Through some experiments, the effectiveness of the proposed method was demonstrated. Especially, it was confirmed that the processing time of the proposed method was shortened to about 1/50 that of the PDC-based method.     

Proton conductivity and microstructures of the core-shell type solid electrolytes in the MO2-In2O3-P2O5 (MTi,Sn, Zr) systems

The proton conducting 0.9MO₂·0.05In₂O₃·1.3P₂O₅ (MTi, Sn, Zr) electrolytes based on a core-shell structure were synthesized by a ball milling method. The core-shell type electrolytes showed the proton conductivities ranging from a higher value than those of Nafion membranes to 10^? 5 Scm^? 1 at intermediate temperatures of 150–200 °C, depending on the heat-treatment conditions. The samples with high conductivity were proved to adopt a core-shell structure by SEM observation, powder XRD analysis and ³¹P MAS-NMR measurements.     

Quartz crystal microbalance immunosensor for highly sensitive 2,3,7,8-tetrachlorodibenzo-p-dioxin detection in fly ash from municipal solid waste incinerators

A quartz crystal microbalance (QCM) immunosensor was developed for the detection of 2,3,7,8-tetrachlorodibenzo-p-dioxins (TCDD) in environmental pollutants. An anti-TCDD antibody was immobilized on the gold surface of the QCM via chemical coupling, and its immunologic activity was then maintained by treatment with an artificial stabilizing reagent such as poly(2-methacryloyloxyethyl phosphorylcholine-co-n-butyl methacrylate). A competitive immunoreaction with TCDD conjugated ovalbumin (TCDD-ovalbumin) was used to detect TCDD. A calibration curve was obtained through the competitive immunoreaction, and linearity was shown from 100 ng mL(-1) to 0.1 ng mL(-1). Also, the cross-reactivities of the anti-TCDD monoclonal antibody were thoroughly evaluated with several TCDD derivatives. The relationships between GC-MS, ELISA, and QCM were compared using fly ash samples from a municipal solid waste, which were prepared using an accelerated solvent extractor. For 23 samples, the experimental relationship between the TCDD concentration by QCM vs. the TCDD concentration by ELISA was y= 1.07x + 2.70, r= 0.99, and the TCDD concentration by QCM vs. the toxic equivalent quantity (TEQ) value by GC-MS was y= 2.46x - 14.98, r= 0.89.     

Synthesis and light‐emitting properties of carbazole‐based copolymers bearing cyano‐substituted arylenevinylene chromophore

Two arylenevinylene compounds bearing the cyano group at α‐position ( 6 ) and β‐position ( 9 ) from the dialkoxylphenylene unit were synthesized, in which the molecular termini were functionalized with 3‐bromocarbazole. The Suzuki coupling copolymerization of these compounds with 1,4‐bis[(3′‐bromocarbazole‐9′‐yl)methylene]‐2,5‐didecyloxybenzene and 9,9‐dihexylfluorene‐2,7‐bis(boronic acid) was carried out to obtain copolymers ( cp67 and cp97 ) containing the cyano‐substituted arylenevinylene fluorophore of 7 mol %. Model compounds ( 6 ′ and 9 ′) corresponding to the arylenevinylene fluorophore were also prepared. The UV spectra of copolymers resembled that of homopolymer hp with no arylenevinylene segment in both CHCl₃ solution and thin film. The emission maxima of copolymers in CHCl₃ (394 nm) agreed with that of homopolymer indicating that the emission bands originated from the carbazole‐fluorene‐carbazole segment. The emission maximum wavelength of copolymer cp67 in thin film (477 nm) indicated fluorescence from the cyano‐substituted arylenevinylene fluorophore because of the occurrence of fluorescence resonance electron transfer. In contrast, copolymer cp97 showed fluorescence at 528 nm to suggest the formation of a new emissive species such as a charge‐transfer complex (exciplex). © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 91–98, 2010