60keV质子辐照对TiNi记忆合金薄膜马氏体相变的影响

 利用磁控溅射的方法在氧化后的单晶Si基片上制备了TiNi形状记忆合金薄膜，利用示差扫描量热法和原位X射线衍射研究了薄膜的马氏体相变特征。通过60keV质子注入（辐照）薄膜样品研究了H+离子对合金薄膜马氏体相变特征的影响，结果表明氢离子注入后引起了马氏体相变开始Ms和结束点Mf以及逆马氏体相变开始As和结束温度Af的下降，而对R相变开始Rs和结束温度Rf影响不大。掠入射X射线衍射表明H+离子注入后有氢化物形成。H⁺离子注入形成的氢化物是引起相变点的变化的主要因素。     

全息散斑条纹的提取及图像处理

介绍了一种新的全息散斑条纹的提取方法.理论和实验表明:对全息散斑底片逐点再现时,两伴生亮斑条纹是全息散斑底片一级衍射光的杨氏干涉条纹,与中央的杨氏条纹是一致的,有较高的条纹对比度且没有背景光晕的影响.利用计算机数字图像处理技术对伴生散斑条纹进行处理,定量测试了受静载物体的面内位移.     

Local and global chirality at surfaces: succinic acid versus tartaric acid on Cu110

A detailed comparison of tartaric acid (HOOC-CHOH-CHOH-COOH) and succinic acid (HOOC-CH(2)-CH(2)-COOH) molecules on a Cu(110) surface is presented with a view to elucidate how the two-dimensional chirality exhibited by such robust, chemisorbed systems is affected when both OH groups of the former molecule are replaced with H groups, a stereochemical change that leaves the metal-bonding functionalities of the molecule untouched but destroys both chiral centers. It is found that this change does not significantly affect the thermodynamically preferred chemical forms that are adopted, namely the doubly deprotonated bicarboxylate at low coverages (theta 相似文献   

偏氟乙烯和四氟乙烯共聚反应中链自由基的反应性

应用高分辨率核磁共振仪研究了一系列不同组成的偏氟乙烯和四氟乙烯共聚物。指出,共振核—CF_2—的化学位移不仅受第一、二邻位基团的影响,也受第三邻位的影响。偏氟乙烯和四氟乙烯以无规共聚进行反应,在共聚反应中的链自由基﹏CF_2·或﹏CH_2·容易增长于CH_2=CF_2的CH_2端,而链自由基﹏CH_2·在偏氟乙烯和四氟乙烯共聚反应中的增长倾向于四氟乙烯。     

The structure and crystallization of thin water films on Pt(111)

When water is adsorbed on Pt(111) above 135 K several different ice structures crystallize, depending on the thickness of the ice layer. At low coverage water forms extended islands of ice with a (square root(37) x square root(37))R25(o) unit cell, which compresses as the monolayer saturates to form a (square root(39) x square root(39))R16(o) structure. The square root(39) low-energy electron diffraction (LEED) pattern becomes more intense as the second layer grows, remaining bright for films up of 10-15 layers and then fading and disappearing for films more than ca. 40 layers thick. The ice multilayer consists of an ordered square root(39) wetting layer, on which ice grows as a crystalline film which progressively loses its registry to the wetting layer. Ice films more than ca. 50 layers thick develop a hexagonal LEED pattern, the entire film and wetting layer reorienting to form an incommensurate bulk ice. These changes are reflected in the vibrational spectra which show changes in line shape and intensity associated with the different ice structures. Thin amorphous solid water films crystallize to form the same phases observed during growth, implying that these structures are thermodynamically stable and not kinetic phases formed during growth. The change from a square root(39) registry to incommensurate bulk ice at ca. 50 layers is associated with a change in crystallization kinetics from nucleation at the Pt(111) interface in thin films to nucleation of incommensurate bulk ice in amorphous solid water films more than 50 layers thick.     

咪唑类化合物-CuCl络合催化剂在甲醇氧化羰基化反应中的催化性能

研究了咪唑及其衍生物配合CuCl对甲醇液相氧化羰化合成碳酸二甲酯的催化性能。筛选出溶解性好、腐蚀性小且催化活性高的多功能助催剂。实验结果表明，反应体系中加入N-甲基咪唑后，CuCl可以完全溶解。当催化剂的浓度为0.2 mol/L, N-甲基咪唑与CuCl的量为4∶1，反应温度为120 ℃，反应压力为2.40 MPa，CO与O2的进气比2∶1，反应3 h的条件下甲醇的摩尔转化率为15.4%，选择性为98%以上。从腐蚀性试验结果看，50 ℃时，加入N-甲基咪唑化合物后，Q235钢在CuCl/CH3OH/H2O/CO/O2体系中的腐蚀速率为0.22mm/a，缓蚀效率为94.5%。动力学研究表明，反应近似为一级，加入N-甲基咪唑后，反应速率常数为0.15 min－1。     

Theoretical Study of the Low-Lying Excited States of Butoxy Radicals and Non-Radiative Decay Routes

The potential energy surfaces for the butoxy radical dissociation into R·＋O on the six low-lying electronic states have been determined with the combined CASSCF and MR-CI methods. The isomerization reactions between the different conformers of 1- and 2-butoxy radicals at the X and B states have been also investigated with the MP2, B3LYP, and CASSCF methods. The non-radiative decay mechanisms of butoxy radicals at the B state have been characterized with the computed potential energy surfaces and intersections. Supported by recent LIF experimental results, it was predicted that the t-butoxy radical would predissociate via the B/C intersection. As to 1- and 2-butoxy radicals, the relative energies of the transition states for the isomerization reactions between conformers at the B state are much lower than those of the B/C intersections, resulting in the predominance of the isomerization in the decay of the B state for 1- and 2-butoxy radicals.     

Validated TLC-densitometry method for the simultaneous analysis of pyrethroid insecticides in agricultural and domestic products

ABSTRACT: BACKGROUND: Pyrethroids are widely used for the control of pests and insects, as pyrethroids are believed to pose very little risk to human health and environment. However, exposure to the pyrethroids exceeding the label directions might adversely affect human health and environment. Hence a careful selection of environment friendly household product is required that must contain exactly the label claimed pyrethroids amount. RESULTS: A sensitive and robust TLC-densitometric method for simultaneous quantification of commonly used synthetic pyrethroids including esbiothrin, alpha-cypermethrin and cis/trans permethrin in agricultural and domestic products has been developed and validated. TLC aluminum plates, precoated with 0.2 mm thick layer of silica gel 60 F-254, were used for chromatographic process. Densitometric analysis of chromatoplates was carried out in absorbance mode at corresponding lamdamax of each pyrethroid. Equally valid common mobile phase for all pyrethroids consisted of hexane-dichloromethane-ethylacetate-formic acid (8:1.5:0.4:0.1 v/v/v/v) which provided sharp and symmetrical peaks of esbiothrin, alpha-cypermethrin, trans-permethrin and cis-permethrin, at Rf 0.31, 0.53, 0.6 and 0.65, respectively. Linear regression data for respective calibration curves showed a good linearity for all pyrethroids with r = 0.991-0.996. Limits of detection (LOD) and limits of quantification (LOQ) for all pyrethroids were found in the range of 1.6-2.8 and 4.9-8.5 ng/spot, respectively. CONCLUSIONS: The developed method is applicable for separating the mixture of pyrethroids and at the same time, it is also valid for separating their isomers. The method is reproducible, precise and accurate for the quantitative determination of pyrethroids in agricultural and domestic products.