New liquid chromatographic-chemometric approach for the determination of sunset yellow and tartrazine in commercial preparation

A new liquid chromatographic (LC)-chemometric approach was developed for the determination of sunset yellow (SUN) and tartrazine (TAR) in commercial preparations. This approach uses LC and chemometric calibration methods, i.e., classical least-squares (CLS), principal component regression (PCR), and partial-least squares (PLS), simultaneously. The combined LC-chemometric approaches, denoted as LC-CLS, LC-PCR, and LC-PLS, are based on photodiode array (PDA) detection at multiple wavelengths. Optimum chromatographic separation of SUN and TAR with allura red as the internal standard (IS) was obtained by using a Waters Symmetry C18 column, 5 microm, 4.6 x 250 mm, and 0.2 M acetate buffer (pH 5)-acetonitrile-methano-bidistilled water (55 + 20 + 15 + 10, v/v) as the mobile phase at a flow rate of 1.9 mL/min. The LC data sets consisting of the ratios of analyte peak areas to the IS peak area were obtained by using PDA detection at 5 wavelengths (465, 470, 475, 480, and 485 nm). LC-chemometric calibrations for SUN and TAR were separately constructed by using the relationship between the peak-area ratio and the training sets for each colorant. LC-chemometric approaches were tested for different synthetic mixtures containing SUN and TAR in the presence of the IS. These LC-chemometric calibrations were applied to a commercial preparation of the 2 colorants. The experimental results of the LC-chemometric approaches were compared with those obtained by a developed classical LC method using single-wavelength detection.     

A facile protocol for the preparation of 5-alkylidene and 5-imino substituted hydantoins from N,N′-disubstituted parabanic acids

A convenient procedure for the preparation of various substituted (thio)hydantoins is described. The method is based on Wittig and aza-Wittig reactions of parabanic acids with phosphonium ylides. The reactions occurred both regio- and stereo-selectively.     

Postfunctionalization of polyoxanorbornene via sequential Michael addition and radical thiol‐ene click reactions

We demonstrated the successful postfunctionalization of poly(oxanorbornene imide) (PONB) with two types of double bonds using sequential orthogonal reactions, nucleophilic thiol‐ene coupling via Michael addition and radical thiol‐ene click reactions. First, the synthesis of PONB with side chain acrylate groups is carried out via ring‐opening metathesis polymerization and nitroxide radical coupling reaction, respectively. Subsequently, the resulting polymer having two different orthogonal functionalities, main chain vinyl and side chain acrylate, is selectively modified via two sequential thiol‐ene click reactions, nucleophilic thiol‐ene coupling via Michael addition and photoinduced radical thiol‐ene. The orthogonal reactivity of two diverse double bonds, vinyl and acrylate functionalities, for the abovementioned consecutive thiol‐ene click reactions was first demonstrated on the model compound. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Synthesis,characterization and biological evaluation of some novel sulfonylthiosemicarbazides

Abstract

A series of thiosemicarbazides were synthesized and structurally characterized by spectroscopic techniques (NMR, FT-IR) besides elemental analysis. These compounds were evaluated for their cytotoxicity against human breast cancer cell line MCF7 and prostate cancer cell line PC3 and nonmalignant fibroblast L929 cell line by MTT assay. Among the compounds, N-[2-(4-chlorophenyl)ethyl]-2-[(4-methylphenyl)sulfonyl]hydrazinecarbothioamide (3d) and 2-[(4-methylphenyl)sulfonyl]-N-[4-(trifluoromethoxy)phenyl]hydrazinecarbothioamide (3f) were found to display significant cytotoxicity with IC₅₀ of 13.87?μM (against PC3 cell line) and 1.47?μM (against MCF7 cell line), respectively. These compounds were non-cytotoxic to normal cell line with IC₅₀>100?μM. Western blotting studies demonstrated that compound 3f induced apoptosis and caused cell death in the MCF7 and PC3 cell lines via an increase in Bax protein expression and a slight decrease in Bcl-2 protein expression. The gene expression ratio Bax/Bcl-2 showed the induction of mitochondrial apoptosis in cancer cell lines. All of synthesized compounds have also been tested for antioxidant activity and all compounds achieved strong inhibition of the DPPH radical. These findings showed that compound 3f, displays potential to be further explored in the development of new anticancer agents.     

Synthesis and Properties of Thiophene and Dithiin Functionalized Tetrathiafulvalenes

Abstract

Syntheses of two analogues of tetrathiafulvalene (TTF), fused to 1,4-dithiin and thiophene rings, substituted with thiophene moieties, have been illustrated. The syntheses were accomplished through the reaction of a 1,8-diketone with phosphorus pentasulfide or Lawesson's reagent in boiling dry toluene. Conversion of the thioketones to their the oxo forms with mercury (II) acetate, was followed by self-coupling in freshly distilled boiling triethyl phosphite. Attempts for their electro-polymerizations through the thiophene groups at the peripherals were unsuccessful. Computational chemistry studies revealed that the thiophene groups did not exhibit enough spin densities to perform polymerization.

Supplemental materials are available for this article. Go to the publisher's online edition of Phosphorus, Sulfur, and Silicon and the Related Elements to view the free supplemental file.     

The Pharmacokinetic Profiles of Pre-Operative Prophylactic Cefepime Application in Pregnant and Non-Pregnant Women Undergoing Surgical Interventions Using a Fully Validated Liquid Chromatographic Method

Pregnancy alters pharmacokinetic profile of many drugs, because of altering body volume and metabolism rate. Therefore, dosage rates and concentrations of drugs must be controlled during pregnancy. Here, we identified the pharmacokinetic profile of pre-operatively given cefepime in caesarean section and gynecological operations using a simple, rapid, cost-effective and valid liquid chromatographic method. The chromatographic separation was performed using 40 mM, pH 3.2 phosphate buffer containing 6 % methanol as mobile phase at 0.30 mL min^?1 flow rate. Gradient elution with methanol was applied to get shorter analysis time without any interference from plasma endogens. During analyses, temperature of column, autosampler and detector were set as 30, 10 and 40 °C, respectively. The detection wavelength was 260 nm and ceftizoxime was used as internal standard. At the optimum conditions, the cefepime analysis from plasma samples was completed in 7 min. Cefepime was extracted from plasma samples using perchloric acid with a very high recovery rate (99.3 %). The method was fully validated according to the Food and Drug Administration guidelines for bioanalytical method validation, and found to be selective, linear, repeatable, reproducible and robust. After validation studies, the method was applied to five caesarean-sectioned and four non-pregnant sectioned women treated with pre-operative, prophylactic single intravenous dose of cefepime (1 g Maxipime^®) in order to determine pharmacokinetic profile of cefepime. Peak serum concentrations of cefepime in caesarean-sectioned women at the arterial port after infusion was 70.11 ± 10.74 μg mL^?1. The mean elimination half-life, volume of distribution and calculated area under the concentration–time curve (AUC)_0–∞ were 1.10 ± 0.23 h, 14.22 ± 2.29 L and 101.55 ± 10.99 μg h mL^?1 for caesarean-sectioned women; and 1.14 ± 0.21 h, 14.76 ± 2.92 L and 104.71 ± 36.34 μg h mL^?1 for non-pregnant sectioned women, respectively. The area under curve, elimination half-life, maximum plasma concentration and the mean distribution volume of cefepime were not changed in case of pregnancy.     

Impacts of conductive inner L-shaped obstacle and elastic bottom wall on MHD forced convection of a nanofluid in vented cavity

Journal of Thermal Analysis and Calorimetry - Forced convection of nanofluid in a vented cavity with elastic bottom wall is studied by using an inner conductive L-shaped object and magnetic field....     

Crystal structure and computational studies of (E)-1-(benzo[b]thiophen-3-yl)-N-(4-ethoxyphenyl)methanimine

Crystallography Reports - The title compound, C17H15NOS, crystallizes in the orthorhombic sp. gr. Pca21. Two molecules in the asymmetric unit have similar structure. Crystal structure contains weak...     

Improving weighted information criterion by using optimization

Although artificial neural networks (ANN) have been widely used in forecasting time series, the determination of the best model is still a problem that has been studied a lot. Various approaches available in the literature have been proposed in order to select the best model for forecasting in ANN in recent years. One of these approaches is to use a model selection strategy based on the weighted information criterion (WIC). WIC is calculated by summing weighted different selection criteria which measure the forecasting accuracy of an ANN model in different ways. In the calculation of WIC, the weights of different selection criteria are determined heuristically. In this study, these weights are calculated by using optimization in order to obtain a more consistent criterion. Four real time series are analyzed in order to show the efficiency of the improved WIC. When the weights are determined based on the optimization, it is obviously seen that the improved WIC produces better results.