Effect of film thickness on the electro-reduction of molecular oxygen on electropolymerized cobalt tetra-aminophthalocyanine films

We studied the electrocatalytic activity of cobalt tetra-aminophthalocyanine (CoTAPc) for the reduction of molecular oxygen (O₂) on adsorbed monomeric and on electropolymerized films of different thicknesses on glassy carbon (GC) electrode. The polymeric films, denoted poly-CoTAPc, were first characterized by electrochemical impedance spectroscopy and it appears that the types of phenomena revealed to be occurring depend less on the film thickness in basic than in acid media. For O₂ reduction, the results showed that poly-CoTAPc is more active than the monomeric CoTAPc adsorbed on GC. Indeed, rotating ring-disk electrode data showed that polymeric CoTAPc promotes the four-electron reduction of O₂ to water in parallel to a two-electron reduction to give peroxide. On monomeric and thin films of poly-CoTAPc, a two-electron reduction mechanism predominates. In basic media the activity increases very slightly with thickness, whereas in acid media this increase is more pronounced. This parallels the observed behavior revealed by electrochemical impedance spectroscopy.     

Overview of significant examples of electrochemical sensor arrays designed for detection of nitric oxide and relevant species in a biological environment

Ultramicroelectrode sensor arrays in which each electrode, or groups of electrodes, are individually addressable are of particular interest for detection of several species concomitantly, by using specific sensing chemistry for each analyte, or for mapping of one analyte to achieve spatio–temporal analysis. Microfabrication technology, for example photolitography, is usually used for fabrication of these arrays. The most widespread geometries produced by photolithography are thin-film microdisc electrode arrays with different electrode distributions (square, hexagonal, or random). In this paper we review different electrochemical sensor arrays developed to monitor, in vivo, NO levels produced by cultured cells or sliced tissues. Simultaneous detection of NO and analytes interacting with or released at the same time as NO is also discussed.     

Development of special optical fibers for evanescent-wave chemical sensing

The paper summarizes results achieved in the Institute of Radio Engineering and Electronics in the field of investigation and fabrication of novel fiber-optic structures for evanescent-wave chemical sensing. Several approaches for increasing the evanescent-wave sensitivity of multimode silica optical fibers to gaseous and liquid chemicals are shown. These approaches make use of the decrease of the core diameter in sectorial and capillary sectorial fibers, modification of trajectories of optical rays in the cores of inverted-graded-index fibers, tailoring of the refractive index of porous layers applied on silica cores, an output mode filter preventing the detection of rays propagating at low axial angles or fibers bent in single or multiple turns. Presented at the 1st Czech-Chinese Workshop “Advanced Materials for Optoelectronics”, Prague, Czech Republic, June 13–17, 1998. This work was supported by the Grant Agency of the Czech Republic (projects No. 102/96/0939 and No. 102/98/1358) and by joint project No. 4104 of AS CR and CNRS, France.     

Expanded Pyridiniums: Bis‐cyclization of Branched Pyridiniums into Their Fused Polycyclic and Positively Charged Derivatives—Assessing the Impact of Pericondensation on Structural,Electrochemical, Electronic,and Photophysical Features

This study evaluates the impact of the extension of the π‐conjugated system of pyridiniums on their various properties. The molecular scaffold of aryl‐substituted expanded pyridiniums (referred to as branched species) can be photochemically bis‐cyclized into the corresponding fused polycyclic derivatives (referred to as pericondensed species). The representative 1,2,4,6‐tetraphenylpyridinium ( 1^H ) and 1,2,3,5,6‐pentaphenyl‐4‐(p‐tolyl)pyridinium ( 2^Me ) tetra‐ and hexa‐branched pyridiniums are herein compared with their corresponding pericondensed derivatives, the fully fused 9‐phenylbenzo[1,2]quinolizino[3,4,5,6‐def]phenanthridinium ( 1^H f ) and the hitherto unknown hemifused 9‐methyl‐1,2,3‐triphenylbenzo[h]phenanthro[9,10,1‐def]isoquinolinium ( 2^Me f ). Combined solid‐state X‐ray crystallography and solution NMR experiments showed that stacking interactions are barely efficient when the pericondensed pyridiniums are not appropriately substituted. The electrochemical study revealed that the first reduction process of all the expanded pyridiniums occurs at around ?1 V vs. SCE, which indicates that the lowest unoccupied molecular orbital (LUMO) remains essentially localized on the pyridinium core regardless of pericondensation. In contrast, the electronic and photophysical properties are significantly affected on going from branched to pericondensed pyridiniums. Typically, the number of absorption bands increases with extended activity towards the visible region (down to ca. 450 nm in MeCN), whereas emission quantum yields are increased by three orders of magnitude (at ca. 0.25 on average). A relationship is established between the observed differential impact of the pericondensation and the importance of the localized LUMO on the properties considered: predominant for the first reduction process compared with secondary for the optical and photophysical properties.     

Synthesis of 6-amino-5-cyano-1,4-disubstituted-2(1H)-pyrimidinones via copper-(I)-catalyzed alkyne-azide 'click chemistry' and their reactivity

In this paper we present the room temperature synthesis of a novel serie of 1,4-disubstituted-1,2,3-triazoles 4a-l by employing the (3+2) cycloaddition reaction of pyrimidinones containing alkyne functions with different model azides in the presence of copper sulphate and sodium ascorbate. To obtain the final triazoles, we also synthesized the major precursors 6-amino-5-cyano-1,4-disubstituted-2(1H)-pyrimidinones 3a-r from ethyl 2,2-dicyanovinylcarbamate derivatives 2a-c and various primary aromatic amines containing an alkyne group. The triazoles were prepared in good to very good yields.     

Photoinduced processes within compact dyads based on triphenylpyridinium-functionalized bipyridyl complexes of ruthenium(II)

As an alternative to conventional charge-separation functional molecular models based on long-range ET within redox cascades, a "compact approach" has been examined. To this end, spacer elements usually inserted between main redox-active units within polyad systems have been removed, allowing extended rigidity but at the expense of enhanced intercomponent electronic communication. The molecular assemblies investigated here are of the P-(theta (1))-A type, where the theta (1) twist angle is related to the degree of conjugation between the photosensitizer (P, of {Ru(bpy)(3)}(2+) type) and the electron-acceptor (A). 4-N- and 4-N-,4'-N-(2,4,6-triphenylpyridinio)-2,2'-bipyridine ligands (A(1)-bpy and A(2)-bpy, respectively) have been synthesized to give complexes with Ru(II), 1-bpy and 2-bpy, respectively. Combined solid-state analysis (X-ray crystallography), solution studies ((1)H NMR, cyclic voltammetry) and computational structural optimization allowed verifying that theta (1) angle approaches 90 degrees within 1-bpy and 2-bpy in solution. Also, anticipated existence of strong intercomponent electronic coupling has been confirmed by investigating electronic absorption properties and electrochemical behavior of the compounds. The capability of 1-bpy and 2-bpy to undergo PET process was evaluated by carrying out their photophysical study (steady state emission and time-resolved spectroscopy at both 293 and 77 K). The conformational dependence of photoinduced processes within P-(theta (1))-A systems has been established by comparing the photophysical properties of 1-bpy (and 2-bpy) with those of an affiliated species reported in the literature, 1-phen. A complementary theoretical analysis (DFT) of the change of spin density distribution within model [1-bpy(theta (1))](-) mono-reduced species as a function of theta (1) has been undertaken and the possibility of conformationally switching emission properties of P was derived.     

The exploring microstructural,caloric, and corrosion behavior of NiTiNb shape-memory alloys

Journal of Thermal Analysis and Calorimetry - The influence of four different quantities of niobium (Nb) on some physical and chemical properties of Ni-Ti alloy was examined in this study....     

A sampling theorem related to the Wilson transform

In this paper, we establish a sampling theorem related to the nonterminating version of the Wilson polynomials and we give a generalization of the de Branges–Wilson integral.     

An acyclic days-off scheduling problem

This paper studies the days off scheduling problem when the demand for staffing fluctuates from day to another and when the number of total workdays is fixed in advance for each employee. The scheduling problem is then to allocate rests to employees with different days off policies: (1) two or three consecutive days off for each employee per week and (2) at least three consecutive days off for each employee per month. For each one, we propose a polynomial time algorithm to construct a solution if it exists. Received: April 2005 / Revised version: October 2005 AMS classification: 60K25, 60K30     

On the norm of the Lp-Dunkl transform

In this work, we establish a Babenko–Beckner-type inequality for the Dunkl transform of a radial function and Dunkl transform associated to a finite reflection group generated by the sign changes. As applications, we establish a new version of Young’s-type inequality and uncertainty relation for Renyi entropy.