PI Mtoyoura: a new PI M subtype found by separator and hybrid isoelectric focusing

In the course of a population study of alpha 1-antitrypsin polymorphism by separator isoelectric focusing, a variant phenotype having a somewhat narrower spacing than PI M1M3 was observed in a Japanese blood donor. Family studies by hybrid isoelectric focusing in a carrier ampholyte-supplemented immobilized pH gradient from 4.35-4.65 revealed that the products of the responsible gene, PI*Mtoyoura, were extremely close but slightly cathodal to those of PI*M1. The difference in isoelectric point between them corresponded to the resolving limit of isoelectric focusing. For this reason, although the propositus' father was deduced to have the genotype PI*M1/PI*Mtoyoura, the products of these two genes failed to form a double band pattern. Thus, the gene frequency for PI*Mtoyoura was unknown. These findings, however, indicate that a further microheterogeneity in the PI M subtype exists at least in the Japanese.     

Optical-Optical Double Resonance Spectroscopy of the 1g(P1)-AΠ (1u)-XΣg Transition of I2

Optical-optical double resonance spectroscopy was used to study the 1_g(³P₁) ion-pair state of I₂ correlating to I⁻(¹S)+I⁺³P₁) at the dissociation limit. We gained access to the 1_g(³P₁) state though the A³Π (1_u) state in the (1+1) photon-excitation scheme. The pump laser excited the A³Π (1_u)-X¹Σ_g⁺ transition at a fixed frequency for state selection. The probe laser was scanned to detect the 1_g(³P₁)-A³Π (1_u) resonance by monitoring the ultraviolet emission from the 1_g(³P₁) state at 278 nm. The 1_g(³P₁) state was observed in a vibrational progression consisting of P and R doublets. An energy level analysis was carried out for the 1_g(³P₁) state in the 0≤ v ≤ 14 and 12≤J≤135 range, which led to a set of molecular parameters including the Ω-doubling constant. The Ω-doubling of the 1_g(³P₁) state was discussed by the pure precession model and interpreted to occur through the heterogeneous coupling with the 0_g⁻(³P₁) state correlating to the same ionic asymptote.     

Phase transition of Ta2NiO6 with the trirutile-type structure under high pressure and high temperature

High-pressure phase transition of Ta₂NiO₆ with the trirutile-type structure was investigated from the viewpoint of crystal chemistry. A new quenchable high-pressure phase was found in the pressure range higher than 7 GPa and 900°C. The high-pressure phase has an orthorhombic cell (a=4.797(1) Å, b=5.153(2) Å and c=14.85(1) Å and space group; Abm2), and it is more dense by 9.6% than the trirutile-structured phase. Infrared spectra of the trirutile-type phase and the high-pressure phase show that Ni²⁺ ions in the high-pressure phase are still in octahedral sites. The crystal structure of the high-pressure phase is considered as a cation-ordering trifluorite-type structure, which can be stabilized by a crystal field effect of Ni²⁺ ions.     

Fast Face-Recognition Optical Parallel Correlator Using High Accuracy Correlation Filter

We designed and fabricated a fully automatic fast face recognition optical parallel correlator [E. Watanabe and K. Kodate: Appl. Opt. 44 (2005) 5666] based on the VanderLugt principle. The implementation of an as-yet unattained ultra high-speed system was aided by reconfiguring the system to make it suitable for easier parallel processing, as well as by composing a higher accuracy correlation filter and high-speed ferroelectric liquid crystal-spatial light modulator (FLC-SLM). In running trial experiments using this system (dubbed FARCO), we succeeded in acquiring remarkably low error rates of 1.3% for false match rate (FMR) and 2.6% for false non-match rate (FNMR). Given the results of our experiments, the aim of this paper is to examine methods of designing correlation filters and arranging database image arrays for even faster parallel correlation, underlining the issues of calculation technique, quantization bit rate, pixel size and shift from optical axis. The correlation filter has proved its excellent performance and higher precision than classical correlation and joint transform correlator (JTC). Moreover, arrangement of multi-object reference images leads to 10-channel correlation signals, as sharply marked as those of a single channel. This experiment result demonstrates great potential for achieving the process speed of 10000 face/s.     

Security Applications of Optical Face Recognition System: Access Control in E-Learning

The educational system has gradually shifted from a face-to-face to an e-learning system, which has become prevalent in advanced countries with the advance of information technology, and connection of global networks. Accordingly, a growing demand is emerging for more reliable individual certification with technical precision in order to measure and record learning achievements and credentials of participants. The present system has a limit in terms of registration capacity, therefore, its accuracy has often been questioned. Against this background, an individual certification system is proposed particularly for access control in e-learning. Under our proposed system, a compact optical correlator for facial recognition is employed. This correlator was previously tested for of biometrics authentication accuracy and proved highly reliable, having recorded remarkably low error rates (below 1%). The recorded error rate is sufficiently robust that the system itself can be regarded as a valid and practical viable attestation system.     

Magnetic properties of Mn-rich Rh2Mn1+xSn1−x Heusler alloys

X-ray powder diffraction and magnetization measurements have been carried out on Rh₂Mn_1+xSn_1−x (0≤x≤0.3) alloys. The alloys, which crystallize in the L2₁ structure, were found to exhibit ferromagnetic behavior. The lattice constant a at room temperature decreases with increasing x, whereas the Curie temperature T_C decreases linearly. At 5 K the magnetic moment per formula unit first increases with increasing x and then saturates for x≥0.2. The experimental results are discussed in terms of the influence of the Mn-Mn exchange interactions between the Mn atoms on the Sn and Mn sites.     

The behaviour of carbon species produced by CO disproportionation on Ru(1, 1, 10) and Ru(001) surfaces

The behaviour of adsorbed CO on Ru(001) flat and Ru(l,1,10) stepped surfaces in the CO pressure range between 10^?6 and 10¹ Pa has been investigated by TDS, AES, LEED and UPS. The disproportionation of CO proceeds rapidly on the stepped surface and its apparent activation energy was obtained to be 20 kJ mol^?1 at nearly zero coverage. The carbon species produced by CO disproportionation show non-uniform reactivity with ¹⁸O₂ and provide four CO desorption peaks in TPR spectra, which are assigned to α-C¹⁸O,ß-C¹⁸O and those derived from carbidic and graphitic carbons. At smaller carbon coverage, only α-CO and β-CO were observed, but with increasing coverage the amount of ß-CO reaches a maximum and carbidic carbon is newly formed. Further increase of carbon deposition gives graphitic carbon. The conversion from carbidic to graphitic carbon and the dissolution into the bulk took place upon heating to 1000 K. It is remarkable that very active carbon species are converted to molecular CO through the reaction with O₂ even at low temperature such as 200 K. It was also confirmed that active carbon species are formed on Ru surface during COH₂ reaction.     

Highly-controlled regiospecific free-radical copolymerization of 1,3-diene monomers with sulfur dioxide

The free-radical copolymerization of alkyl-substituted 1,3-butadienes with sulfur dioxide using a redox initiating system in toluene at -78 °C produced poly(diene sulfone)s consisting of a highly alternating and 1,4-regiospecific repeating structure, irrespective of the position and number of alkyl substituents, and the highly regioselective propagation via a free radical reaction mechanism is well accounted for by DFT calculations using model reactions.     

Facile synthesis of graft copolymers containing rigid poly(dialkyl fumarate) branches by macromonomer method

Graft copolymers show microphase separated structure as seen in block copolymers and have lower intrinsic viscosity than block copolymers because of a branching structure. Therefore, considering molding processability, especially for polymers containing rigid segments, graft copolymers are useful architectures. In this work, graft copolymers containing rigid poly(diisopropyl fumarate) (PDiPF) branches were synthesized by full free‐radical polymerization process. First, synthesis of PDiPF macromonomers by addition‐fragmentation chain transfer (AFCT) was investigated. 2,2‐Dimethyl‐4‐methylene‐pentanedioic acid dimethyl ester was found to be an efficient AFCT agent for diisopropyl fumarate (DiPF) polymerization because of the suppression of undesired primary radical termination, which significantly took place when common AFCT agent, methyl 2‐(bromomethyl)acrylate, was used. Copolymerization of PDiPF macromonomer with ethyl acrylate accomplished the generation of the graft copolymer having flexible poly(ethyl acrylate) backbone and rigid PDiPF branches. The graft copolymer showed a microphase separated structure, high transparency, and characteristic thermal properties to PDiPF and poly(ethyl acrylate). © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019 , 57, 2474–2480     

Synthesis of Methyl (Methyl D-and L-Idopyranosid)Uronates from myo-Inositol

Abstract

Methyl (methyl α-D-(9a), α-(9b), β-D-(10a), and β-L-(10b) idopyranosid)uronates were synthesized from myo-inositol. Baeyer-Villiger oxidation of the optically resolved inosose derivatives (3a and 3b) proceeded regioselectively to afford 4a and 4b in high yields, respectively. Ring-opening of the 7-membered hemiacetal-lactones (4a and 4b) with acid and subsequent deprotection gave the title compounds.