From monomeric to polymeric ferroelectric liquid crystals A comparative study of ferroelectric properties

Two new ferroelectric oligosiloxanes, a cyclic tetramer and a twin, have been synthesized. By a comparative study with their corresponding monomer and side chain polysiloxanes, the influence of oligo- and polymerization on the liquid crystalline and ferroelectric properties have been investigated. Polymerization leads to a stabilization of LC phases through increase of the clearing temperatures and suppression of crystallization. Oligomerization also leads to mesophase broadening, but, due to the low degree of polymerization, the effect is inferior to the linear polysiloxanes. The low viscosity of the oligosiloxanes ensures response times in the microsecond region, thus being comparable with their monomer and conventional LMWFLCs. It is found that polymerization increases the spontaneous polarization P_s. This is attributed to the density increase after polymerization, enhancing the inter-mesogenic interactions. The collective and local dynamics of the OFLCs are influenced differently with respect to their molecular structures. Each oligomer is already a good model for its corresponding polymer concerning the soft mode dynamics. For the local β-relaxation a similar temperature dependence of the relaxation times τ for the cyclic tetramer and for the side chain polysiloxanes is observed. The long axial rotation of the twin, having a very efficient decoupling, is significantly faster, thus resembling the monomer.     

PARTIAL VERSUS GENERAL STORAGE POLICY: COMMODITIES AND RESOURCES

This paper examines joint storage considerations when both commodities and resources can be stored, e.g., grain and water for irrigation. Results suggest that when separate agencies control public resource and commodity storage, suboptimal storage rules occur unless (i) each agency is sensitive to the policies of the other, (ii) commodity inventories are adjusted in response to prices, and (iii) resource inventories are adjusted in response to both commodity demand and resource supply conditions. For example, the common case where water storage depends on weather and reservoir conditions alone is not sufficiently general. The results imply that water management agencies that tend to be dominated by engineers and hydrological considerations need to incorporate economic considerations into decision processes.     

The Electronic Structure of Azuleno[1,2,3-cd]phenalene and Azuleno[5,6,7-cd]phenalene,a Comparison

The photoelectron (PE.) spectra of azuleno[l, 2, 3-cd]phenalene ( 1 ) and azuleno- [5,6,7-cd]phenalene( 2 ) have been recorded. The first five bands of both compounds could be assigned to transitions corresponding to removal of electrons from 4a₂, 6b₁, 5b₁, 3a₂ and 4b_l orbitals. This assignment is based mainly on a comparison between the observed ionization potentials and orbital energies calculated in a HMO and a PPP model. The UV./VIS. polarized absorption spectrum of 1 in the region 10000–45000 cm^?1 has been measured by means of the stretched film technique. The measurements were performed in polyethylene sheets at 77°K. Several bands could be assigned to π* ← π transitions calculated by a PPP-CI method. A comparison between the electronic structures of 1 and 2 is made by means of a simple HMO diagram.     

Empfindliche Methode zur Bestimmung geringer Schwefelgehalte in Wolframoxiden und Wolframpulvern

Zusammenfassung Der Schwefel in Wolframoxiden und Wolframpulvern wird im Wasserstoffstrom bei 800°C in H₂S übergeführt, der in Cadmium-Zinkacetat-Lösung absorbiert und anschließend jodometrisch titriert wird. Die Anwesenheit von WO₃ ermöglicht eine quantitative Umwandlung von Sulfatschwefel in H₂S. Die Standardabweichung beträgt für ein Wolframoxid mit 310 ppm S±13 ppmS und für ein Wolfram-Metallpulver mit 45 ppm S±1 ppm S.

---

Sulfur is converted into hydrogen sulphide by hydrogenation at 800°C. This H₂S is absorbed in a cadmium-zinc acetate solution and titrated iodometrically. The presence of WO₃ makes possible a quantitative conversion of sulphate sulphur into H₂S. The standard deviation is ±13 ppm S for WO₃ containing 310 ppm S, and ±1 ppm S for metallic tungsten powder containing 45 ppm S.

---

---

Herrn Prof. Dr.E. Hayek zum 60. Geburtstag gewidmet.     

Beitrag zur Frage der qualitativen und quantitativen Bestimmung einiger Pyridinderivate mit Hilfe der IR-Absorptionsspektroskopie

Zusammenfassung Es wird die Möglichkeit einer qualitativen und quantitativen Reinheitsprüfung mit Mitteln der IR-Absorptionsspektroskopie an einer Anzahl von Pyridinderivaten untersucht. Zu diesem Zweck werden die IR-Absorptionsspektren der reinen Substanzen, sowie von binären und ternären Gemischen aufgenommen. Die Spektren werden aus-gewertet und die Nachweisgrenzen angegeben.Dem Verband der Chemischen Industrie und der Deutschen Forschungsgemeinschaft danken wir für die Unterstützung dieser Arbeit.     

Electron-rich radicals by neutralizationreionization mass spectrometry. Generation, dissociations and energetics of the hydrogen atom adduct to acetamide

Protonated acetamide exists as two planar conformers, the more stable anti-form (anti-1(+)) and the syn-form (syn-1(+)), DeltaG(degree) (298) (anti-->syn) = 10.8 kJ mol(-1). Collisional neutralization of 1(+) produces 1-hydroxy-1-amino-1-ethyl radicals (anti-1 and syn-1) which in part survive for 3.7 micros. The major dissociation of 1 is loss of the hydroxyl hydrogen atom (approximately 95%) which is accompanied by loss of one of the methyl hydrogen atoms (approximately 3%) and loss of the methyl group (approximately 2%). The most favorable dissociation of the OH bond is calculated to be only 34 kJ mol(1) endothermic but requires 88 kJ mol(-1) in the transition state. Other dissociations of 1, e.g., loss of one of the amide hydrogens, methyl hydrogens, and loss of ammonia are calculated to proceed through higher- energy transition states and are not kinetically competitive if proceeding from the ground doublet electronic state of 1. The unimolecular dissociation of 1 following collisional electron transfer is promoted by large Franck-Condon effects that result in 8090 kJ mol(-1) vibrational excitation in the radicals. Radicals 1 are calculated to exoergically abstract hydrogen atoms from acetamide in water, but not in the gas phase. The different reactivity is due to solvent effects that favor the products, (.)CH(2)CONH(2) and CH(3)CH(OH)NH(2), over the reactants.     

Functional Bacterial Amyloids: Understanding Fibrillation,Regulating Biofilm Fibril Formation and Organizing Surface Assemblies

Functional amyloid is produced by many organisms but is particularly well understood in bacteria, where proteins such as CsgA (E. coli) and FapC (Pseudomonas) are assembled as functional bacterial amyloid (FuBA) on the cell surface in a carefully optimized process. Besides a host of helper proteins, FuBA formation is aided by multiple imperfect repeats which stabilize amyloid and streamline the aggregation mechanism to a fast-track assembly dominated by primary nucleation. These repeats, which are found in variable numbers in Pseudomonas, are most likely the structural core of the fibrils, though we still lack experimental data to determine whether the repeats give rise to β-helix structures via stacked β-hairpins (highly likely for CsgA) or more complicated arrangements (possibly the case for FapC). The response of FuBA fibrillation to denaturants suggests that nucleation and elongation involve equal amounts of folding, but protein chaperones preferentially target nucleation for effective inhibition. Smart peptides can be designed based on these imperfect repeats and modified with various flanking sequences to divert aggregation to less stable structures, leading to a reduction in biofilm formation. Small molecules such as EGCG can also divert FuBA to less organized structures, such as partially-folded oligomeric species, with the same detrimental effect on biofilm. Finally, the strong tendency of FuBA to self-assemble can lead to the formation of very regular two-dimensional amyloid films on structured surfaces such as graphite, which strongly implies future use in biosensors or other nanobiomaterials. In summary, the properties of functional amyloid are a much-needed corrective to the unfortunate association of amyloid with neurodegenerative disease and a testimony to nature’s ability to get the best out of a protein fold.     

Cancer-Associated Mutations of the Adenosine A2A Receptor Have Diverse Influences on Ligand Binding and Receptor Functions

The adenosine A_2A receptor (A_2AAR) is a class A G-protein-coupled receptor (GPCR). It is an immune checkpoint in the tumor micro-environment and has become an emerging target for cancer treatment. In this study, we aimed to explore the effects of cancer-patient-derived A_2AAR mutations on ligand binding and receptor functions. The wild-type A_2AAR and 15 mutants identified by Genomic Data Commons (GDC) in human cancers were expressed in HEK293T cells. Firstly, we found that the binding affinity for agonist NECA was decreased in six mutants but increased for the V275A mutant. Mutations A165V and A265V decreased the binding affinity for antagonist ZM241385. Secondly, we found that the potency of NECA (EC₅₀) in an impedance-based cell-morphology assay was mostly correlated with the binding affinity for the different mutants. Moreover, S132L and H278N were found to shift the A_2AAR towards the inactive state. Importantly, we found that ZM241385 could not inhibit the activation of V275A and P285L stimulated by NECA. Taken together, the cancer-associated mutations of A_2AAR modulated ligand binding and receptor functions. This study provides fundamental insights into the structure–activity relationship of the A_2AAR and provides insights for A_2AAR-related personalized treatment in cancer.