Silver nanoparticle containing silk fibroin bionanotextiles

Development of new generation bionanotextiles is an important growing field, and they have found applications as wound dressings, bandages, tissue scaffolds, etc. In this study, silver nanoparticle (AgNP) containing silk-based bionanotextiles were fabricated by electrospinning, and processing parameters were optimized and discussed in detail. AgNPs were in situ synthesized within fibroin nanofibers by UV reduction of silver ions to metallic silver. The influence of post-treatments via methanol treatment and glutaraldehyde (GA) vapor exhibited changes in the secondary structure of silk. Methanol treatment increased the tensile properties of fibers due to supported crystalline silk structure, while GA vapor promoted amorphous secondary structure. AgNP containing silk fibroin bionanotextiles had strong antibacterial activity against gram-positive Staphylococcus aureus and gram-negative Pseudomonas aeruginosa.     

Convenient synthesis of 3,3,3-trifluoropropenyl compounds from aromatic aldehydes by means of the TBAF-mediated Horner reaction

A simple synthesis of 3,3,3-trifluoropropenyl compounds by means of the TBAF-mediated Horner reaction is described. The reagent, 2,2,2-trifluoroethyldiphenylphosphine oxide, was readily prepared either by Arbuzov reaction of ethyl diphenylphosphinite with 2,2,2-trifluoroethyl iodide or by treating chlorodiphenylphosphine with trifluoroacetic acid and water. Treatment of the phosphine oxide with aromatic aldehydes in the presence of TBAF at room temperature afforded the corresponding 3,3,3-trifluoropropenyl compounds in good yields. The present method is very convenient for preparing 3,3,3-trifluoropropenyl compounds from aromatic aldehydes in terms of availability of the reagent, operational simplicity, and good yields of the products.     

Surface characterization and radical decay studies of oxygen plasma‐treated PMMA films

Polymethylmethacrylate (PMMA) films were modified by RF oxygen plasma with various powers applied for different periods, and the effects of these parameters on the surface properties such as hydrophilicity, surface free energy (SFE), chemistry, and topography were investigated by water contact angle, goniometer, X‐ray photoelectron spectroscopy (XPS), and atomic force microscopy, and the types of the created free radicals and their decay were detected by electron spin resonance spectroscopy (ESR). SFE and contact angle results varied depending on the plasma parameters. Oxygen plasma treatment (100 W–30 min) enhanced the hydrophilicity of PMMA surface as shown by decreasing the water contact angle from 70° to 26°. XPS analysis showed the change in the amounts of the present functionalities as well as formation of new groups as free carbonyl and carbonate groups. The roughness of the surface increased considerably from ~2 nm to ~75 nm after 100 W–30 min oxygen plasma treatment. ESR analysis indicated the introduction of peroxy radicals by oxygen plasma treatment, and the intensity of the radicals increased with increasing the applied power. Significant decrease in radical concentration was observed especially for the samples treated with higher powers when the samples were kept under the atmospheric conditions. As a conclusion, RF plasma, causes changes in the chemical and physical properties of the materials depending on the applied parameters, and can be used for the creation of specific groups or radicals to link or immobilize active molecules onto the surface of a material. Copyright © 2012 John Wiley & Sons, Ltd.     

The solid-phase Zincke reaction: preparation of omega-hydroxy pyridinium salts in the search for CFTR activation

A study of structural modifications of MPB-07 was undertaken as part of a synthetic program aimed at discovering small molecules with CFTR activation potential. Solid-phase synthesis techniques were used to prepare derivatives of MPB-07 employing the Zincke reaction for the construction of aromatic, quaternary ammonium salts such as those found in 2 or 3. In this transformation, primary amines react with highly electrophilic N-2,4-dinitrophenylpyridinium (DNP) salt 4 to afford pyridinium salt 8 with release of 2,4-dinitroaniline 6. Thus, the reaction of 1-(2,4-dinitrophenyl)pyridinium salts with various polymer-bound amino ethers, followed by cleavage from the resin, delivers the desired salts in good yield and high purity.     

Synthesis, crystal structure, and structural conversion of Ni molybdate hydrate NiMoO4·nH2O

The synthesis and crystal structure of NiMoO₄·nH₂O were investigated. The hydrate crystallized in the triclinic system with space group P−1, Z=4 with unit cell parameters of a=6.7791(2) Å, b=6.8900(2) Å, c=9.2486(2) Å, α=76.681(2)°, β=83.960(2)°, γ=74.218(2)°. Its ideal chemical composition was NiMoO₄·3/4H₂O rather than NiMoO₄·1H₂O. Under hydrothermal conditions the hydrate turned directly into α-NiMoO₄ above 483 K, giving nanorods thinner than the crystallites of the mother hydrate. On the other hand, it turned into Anderson type of polyoxomolybdate via a solid-solution process in a molybdate solution at room temperature.     

Two-dimensional supramolecular networks generated from weak AgCpy interactions: Synthesis, structural, thermal and fluorescence studies of silver(I) complexes of 5,5-diethylbarbiturato with pyridine-2-ylmethanol and 2,6-dimethoxypyridine

Two new silver(I) complexes [Ag(barb)(pym)]·H₂O (1) and [Ag(barb)(dmpy)]·1.5H₂O (2) (barb = 5,5-diethylbarbiturate, pym = pyridine-2-ylmethanol and dmpy = 2,6-dimethoxypyridine) have been synthesized and characterized by elemental analysis, IR spectroscopy and single crystal X-ray diffraction. In both complexes, the silver(I) ions are linearly coordinated by the N atoms of a barb anion and a pym or a dmpy ligand, forming mononuclear species. The molecules of 1 and 2 are doubly bridged by N–HO hydrogen bonds involving the barb moieties and these hydrogen-bonded dimers are assembled into two-dimensional layered networks through weak AgC_py (η¹) interactions of ca. 3.3 Å. Additionally, the thermal and fluorescent properties of these complexes are also investigated.     

Electrochemical sensors for the simultaneous determination of zinc,cadmium and lead using a Nafion/ionic liquid/graphene composite modified screen-printed carbon electrode

A simple, low cost, and highly sensitive electrochemical sensor, based on a Nafion/ionic liquid/graphene composite modified screen-printed carbon electrode (N/IL/G/SPCE) was developed to determine zinc (Zn(II)), cadmium (Cd(II)), and lead (Pb(II)) simultaneously. This disposable electrode shows excellent conductivity and fast electron transfer kinetics. By in situ plating with a bismuth film (BiF), the developed electrode exhibited well-defined and separate peaks for Zn(II), Cd(II), and Pb(II) by square wave anodic stripping voltammetry (SWASV). Analytical characteristics of the BiF/N/IL/G/SPCE were explored with calibration curves which were found to be linear for Zn(II), Cd(II), and Pb(II) concentrations over the range from 0.1 to 100.0 ng L⁻¹. With an accumulation period of 120 s detection limits of 0.09 ng mL⁻¹, 0.06 ng L⁻¹ and 0.08 ng L⁻¹ were obtained for Zn(II), Cd(II) and Pb(II), respectively using the BiF/N/IL/G/SPCE sensor, calculated as 3σ value of the blank. In addition, the developed electrode displayed a good repeatability and reproducibility. The interference from other common ions associated with Zn(II), Cd(II) and Pb(II) detection could be effectively avoided. Finally, the proposed analytical procedure was applied to detect the trace metal ions in drinking water samples with satisfactory results which demonstrates the suitability of the BiF/N/IL/G/SPCE to detect heavy metals in water samples and the results agreed well with those obtained by inductively coupled plasma mass spectrometry.     

Hydrothermal synthesis of potassium molybdenum oxide bronzes: structure-inheriting solid-state route to blue bronze and dissolution/deposition route to red bronze

The hydrothermal syntheses of the alkali metal molybdenum bronzes from starting solids (H_xMoO₃) with structural affinities to the desired products were investigated. Single-phase potassium blue and red bronzes were prepared by the hydrothermal treatments at around 430 K, and characterized by powder X-ray diffraction, IR spectroscopy, and SEM. The formation processes of these two bronzes during the hydrothermal treatments were found to differ. The blue bronze was formed by a structure-inheriting solid-state route from H_xMoO₃ with x<0.3, whereas the red bronze was formed for x>0.3 through a solution dissolution/deposition route via the formation of MoO₃+MoO₂.