Interfacial phase transition of an environmentally responsive elastin biopolymer adsorbed on functionalized gold nanoparticles studied by colloidal surface plasmon resonance

The change in optical properties of colloidal gold upon aggregation has been used to develop an experimentally convenient colorimetric method to study the interfacial phase transition of an elastin-like polypeptide (ELP), a thermally responsive biopolymer. Gold nanoparticles, functionalized with a self-assembled monolayer (SAM) of mercaptoundecanoic acid onto which an ELP was adsorbed, exhibit a characteristic red color due to the surface plasmon resonance (SPR) of individual colloids. Raising the solution temperature from 10 degrees C to 40 degrees C thermally triggered the hydrophilic-to-hydrophobic phase transition of the adsorbed ELP resulting in formation of large aggregates due to interparticle hydrophobic interaction. Formation of large aggregates caused a change in color of the colloidal suspension from red to violet due to coupling of surface plasmons in aggregated colloids. The surface phase transition of the ELP was reversible, as seen from the reversible change in color upon cooling the suspension to 10 degrees C. The formation of colloidal aggregates due to the interfacial phase transition of adsorbed ELP was independently verified by dynamic light scattering of ELP-modified gold colloids as a function of temperature. Colloidal SPR provides a simple and convenient colorimetric method to study the influence of the solution environment, interfacial properties, and grafting method on the transition properties of ELPs and other environmentally responsive polymers at the solid-water interface.     

Role of dimethyl sulfoxide as a solvent for vinyl polymerization

Dimethyl sulfoxide has been used as a solvent in the polymerization of methyl methacrylate and styrene. The chain-transfer coefficients of the solvent and the values of δ [i.e., (2k_t)^1/2/k_p] in solvent-monomer mixtures of various compositions were determined. δ was observed to be dependent on the solvent concentration in the case of methyl methacrylate but remained constant in case of styrene. The lowering of the values of δ with increasing solvent concentration in case of methyl methacrylate has been attributed to an interaction between the solvent and poly(methyl methacrylate) radical resulting in lower termination rate.     

NS and NSO-Donor ligands and their metal complexes. Synthesis and characterisation of a new low-spin iron(III) complex with 1,2-di(o-aminophenylthio)ethane and iron(III), cobalt(III) and manganese(III) complexes of 1,2-di(o-salicylaldiminophenylthio)ethane

Summary Iron(III) complexes of a quadridentate N₂S₂ donor ligand, 1,2-di(o-aminophenylthio)ethane (DAPTE) and its Schiff Base with salicylaldehyde, a hexadentate N₂S₂O₂ donor ligand,viz. 1,2-di(o-salicylaldiminophenylthio)ethane (H₂DSALPTE) have been synthesised and characterised.The Schiff base ligand (1 mol) gave a dark green tri-iron(III) [Fe₃(DSALPTE)(HDSALPTE)Cl₃]Cl₂ complex when reacted with anhydrous iron(III) chloride (1 mol). The Mössbauer data of this complex suggest the presence of three iron sites, one of which is octahedral and the other two tetrahedral. On the other hand, Fe(ClO₄)₃ reacted smoothly with H₂DSALPTE in ethanol to give a mononuclear pseudo-octahedral complex in which the ligand functions in a dibasic hexadentate fashion. Mössbauer data suggest the presence of a low-spin-high-spin equilibrium in the solid state. The manganese(III) and cobalt(III) complexes of the Schiff base, H₂DSALPTE, are also studied for the sake of comparison with the corresponding iron(III) complex. The N₂S₂ ligand, however, formed a low-spin pseudo-octahedral iron(III) complex. The complexes have been characterised by elemental analysis, molar conductance values, cryomagnetic data and i.r., electronic and Mössbauer spectral data.     

MoSe2 and WSe2 nanotubes and related structures

MoSe2 and WSe2 nanotubes are obtained by the reduction of the corresponding triselenides in hydrogen or by the decomposition of the ammonium selenometallates in a hydrogen atmosphere.     

Spectrophotometric studies on the zirconium complex of 2-(3,6-disulfo-8-hydroxynaphthylazo)-1,8-dihydroxynaphtualene-3, 6-disulfonic acid

Summary A chromotropic azo dye, DSNADNS, prepared from chromotropic acid and 1-amino-8-naphthol-3,6-disulfonic acid has been found to produce quantitative precipitation of zirconium in acid medium. The blue-violet complex formed is insoluble in all organic solvents commonly used for solvent extraction work, but is soluble in a number of liquid organic bases and solutions of ammonium salts in water showing pink to violet colouration. Spectrophotometric studies as to the nature of the complex in pyridine, triethanolamine ammonium acetate, oxalate and carbonate solutions and the analytical possibility of these solutions have been made. The complex appears to decompose in pyridine, ammonium acetate and ammonium oxalate solutions, but it is fairly stable in ammonium carbonate and triethanolamine solutions. The absorbance peaks of the dye in these solutions occur at 500 and 520 nm respectively, while the complex in triethanolamine and ammonium carbonate both shows absorbance maxima at 540 nm. The solution of the complex in these two solvents obeys Beer's law within a concentration range 4 to 25 mg of zirconium per litre. The molar absorbance coefficients of the complex in triethanolamine and ammonium carbonate are respectively 686 and 823, which indicate poor sensitivity. The solution of the complex in the former solvent is more stable than that in the latter and an analytical procedure for the spectrophotometric determination of zirconium, with little interference from foreign ions, may be developed with ease in the triethanolamine solution.

---

Zusammenfassung Ein Azofarbstoff der Chromotropsäure, DSNADNS, der aus Chromotropsäure und 1-Amino-8-naphthol-3,6-disulfonsäure dargestellt werden kann, ergibt mit Zirkonium in saurer Lösung eine quantitative Fällung. Der blauviolett gefärbte Komplex ist in allen üblichen organischen Lösungsmitteln unlöslich, löst sich jedoch in einigen flüssigen organischen Basen sowie wäßrigen Lösungen von Ammoniumsalzen mit rosa bis violetter Färbung. Die Lösungen des Komplexes in Pyridin, Triäthanolamin sowie in Ammoniumacetat, -oxalat und -carbonatlösungen und ihre analytische Verwendbarkeit werden spektrophotometrisch untersucht. In Pyridin sowie in Ammoniumacetat und -oxalatlösungen scheint sich der Komplex zu zersetzen, während er in Triäthanolamin und Ammoniumcarbonatlösungen ziemlich beständig ist. Das Absorptionsmaximum des Farbstoffs in diesen beiden Lösungsmitteln liegt bei 500 bzw. 520 nm, der Komplex weist in beiden Fällen ein Maximum bei 540 nm auf. Das Beersche Gesetz wird in beiden Lösungsmitteln von 4–25 mg Zr/l erfüllt. Der molare Absorptionskoeffizient beträgt 686 bzw. 823. Die Lösung des Komplexes in Triäthanolamin ist stabiler als in Ammoniumcarbonatlösung. Eine spektrophotometrische Bestimmung von Zirkonium, die nur wenig von Fremdionen gestört wird, könnte daher gut in Triäthanolaminlösung durchgeführt werden.

     

Electron impact induced fragmentation of some 1,2,4-triazole derivatives

The mass spectra of eight 1,2,4-triazole derivaties have been recorded and found tao reveal extensive hydrogen and skeletal migrations. The structures of the fragments have been confirmed by deuterium labelling and exact mass measurement. The compounds revealed striking differences in their spectra depending on the nature of the substituents.     

Determination of the orientation of the electric field gradient at the Cu(1) site from the Mössbauer spectra of textured pellets made of YBa2Cu3O7−δ superconductor

A textured pellet of YBa₂Cu₃O_7?δ was prepared and doped with⁵⁷Co. After subsequent heat treatments the cobalt was found at the two copper sites. The degree of alignment of individual crystallites (about 40%) was determined from the Mössbauer spectrum by using a method developed by the authors [1]. The same method showed that the most characteristic doublet component of such spectra (δ=0.08 mm/s; |ΔE _Q|=1.96 mm/s) is associated with a site, most probably a Cu(1) site, where the EFG is parallel to thec direction of the unit cell. The sign ofV _zz turned out to be negative, giving a negative quadrupole splitting (ΔE _Q=?1.96 mm/s) for that component.     

Theoretical analysis of the multi-rotational line TEA CO2 laser

A theoretical model for the multiline TEA CO₂ laser has been developed which takes into account the overlap of the P(20) line of (00⁰1) (10⁰0) regular band transition with the R(23) line of (01¹1) (11¹0) hot band transition. The model is used for the study of the influence of different parameters like laser gas temperature, gas mixture and pump rates on laser intensities of different rotational lines. This study explains the experimental results of the high power multiline TEA CO₂ laser very well.