Quantitative electron probe microanalysis for the characterization of thin carbon-boron layers in fusion devices

Summary The first wall of the fusion device TEXTOR at the Forschungszentrum Jülich has been coated in situ with an amorphous hydrogen rich carbon/boron film (a-C/B:H) which reduces plasma impurities caused by the plasma surface interaction. The results of the coating process of the 35 m² large inner wall surface have been controlled by a recently developed modification of the quantitative electron probe microanalysis, which has been applied to 12 samples from specified positions inside the tokamak. The quantification itself is based on a Monte Carlo simulation of electron trajectories providing very accurate results for X-ray intensities emitted by elements present in the electron bombarded sample. The Monte Carlo results are used in the present work to calibrate the measured X-ray intensities emitted by boron and carbon from the a-C/B:H layers deposited on pure silicon substrates. As a result the total deposited mass of the layer per area unit as well as the composition of the layers (except hydrogen) could be determined very accurately. The relative errors were less than 7%. The limit of detectability were found to be in the range of one monolayer for boron as well as for carbon.     

Der Abbau des Insektizides GS 13005 in der Ratte. Strukturaufklärung der wichtigsten Metabolite [1]

The structures of the essential metabolites which are excreted by the rat after oral application of GS 13005 (O,O-dimethyl-S-[(2-methoxy-1,3,4-thiadiazole-5(4H)-one-4-yl)-methyl] dithiophosphate) have been elucidated. The product of final oxidation, CO₂, was found to be the main metabolite (up to 36% of the dose applied). Among the degradation products excreted in the urine (up to 45% of the dose applied) the two most important were isolated. They are 4-methylsulfinylmethyl and 4-methylsulfonylmethyl derivatives respectively of the intact 2-methoxy-1,3,4-thiadiazole-5-one heterocycle (metabolites III and II, in amounts of 20–25% and 5–7% of the dose applied, respectively). These metabolites originate by methylation and subsequent oxidation from the mercaptomethyl derivative liberated after hydrolysis of the P S bond of the dithiophosphoric acid ester.     

Stabilitätsungleichungen für Diskretisierungen von Randwertaufgaben gewöhnlicher Differentialgleichungen

Summary We consider two-point boundary value problems for linear differential equations (of ordern). The main part consists in proving stronger apriori estimates for (mn–1) using discreteL ₁-norms of the involved right-hand sides; thus extending known results for discreteL _p -norms with 2p. These estimates are the main tool in proving sharp estimates for the error \y–y _h \ _h, as well asfor \P _y –P _h y _h \ _h, , whereP _h denotes a consistent approximation of the differential operatorP of ordermn–1, in terms of the discretL ₁-norm of the truncation error. By means of an interpolation technique these estimates yield a correct estimate of the order of convergence, also in case that the solution satisfies locally some Lipschitz-conditions.     

InP(001)-(2 x 1) surface: a hydrogen stabilized structure

The InP(001)(2 x 1) surface has been reported to consist of a semiconducting monolayer of buckled phosphorus dimers. This apparent violation of the electron counting principle was explained by effects of strong electron correlation. Combining first-principles calculations with reflectance anisotropy spectroscopy and LEED experiments, we find that the (2 x 1) reconstruction is not at all a clean surface: it is induced by hydrogen adsorbed in an alternating sequence on the buckled P dimers. Thus, the microscopic structure of the InP growth plane relevant to standard gas phase epitaxy conditions is resolved and shown to obey the electron counting rule.     

Nanobodies: Chemical Functionalization Strategies and Intracellular Applications

Nanobodies can be seen as next‐generation tools for the recognition and modulation of antigens that are inaccessible to conventional antibodies. Due to their compact structure and high stability, nanobodies see frequent usage in basic research, and their chemical functionalization opens the way towards promising diagnostic and therapeutic applications. In this Review, central aspects of nanobody functionalization are presented, together with selected applications. While early conjugation strategies relied on the random modification of natural amino acids, more recent studies have focused on the site‐specific attachment of functional moieties. Such techniques include chemoenzymatic approaches, expressed protein ligation, and amber suppression in combination with bioorthogonal modification strategies. Recent applications range from sophisticated imaging and mass spectrometry to the delivery of nanobodies into living cells for the visualization and manipulation of intracellular antigens.     

Low-pressure pyrolysis of tBu2SO: synthesis and IR spectroscopic detection of HSOH

Sulfenic acid (HSOH, 1 ) has been synthesized in the gas‐phase by low‐pressure high‐temperature (1150 °C) pyrolysis of di‐tert‐butyl sulfoxide (tBu₂SO, 2 ) and characterized by means of matrix isolation and gas‐phase IR spectroscopy. High‐level coupled‐cluster (CC) calculations (CCSD(T)/cc‐pVTZ and CCSD(T)/cc‐pVQZ) support the first identification of the gas‐phase IR spectrum of 1 and enable its spectral characterization. Five of the six vibrational fundamentals of matrix‐isolated 1 have been assigned, and its rotational‐resolved gas‐phase IR spectrum provides additional information on the O–H and S–H stretching fundamentals. Investigations of the pyrolysis reaction by mass spectrometry, matrix isolation, and gas‐phase FT‐IR spectroscopy reveal that, up to 500 °C, 2 decomposes selectively into tert‐butylsulfenic acid, (tBuSOH, 3 ), and 2‐methylpropene. The formation of the isomeric sulfoxide (tBu(H)SO, 3 a ) has been excluded. Transient 3 has been characterized by a comprehensive matrix and gas‐phase vibrational IR study guided by the predicted vibrational spectrum calculated at the density functional theory (DFT) level (B3LYP/6‐311+G(2d,p)). At higher temperatures, the intramolecular decomposition of 3 , monitored by matrix IR spectroscopy, yields short‐lived 1 along with 2‐methylpropene, but also H₂O, and most probably sulfur atoms. In addition, HSSOH ( 6 ), H₂, and S₂O are found among the final pyrolysis products observed at 1150 °C in the gas phase owing to competing intra‐ and intermolecular decomposition routes of 3 . The decomposition routes of the starting compound 2 and of the primary intermediate 3 are discussed on the basis of experimental results and a computational study performed at the B3LYP/6‐311G* and second‐order Møller–Plesset (MP2/6‐311G* and RI‐MP2/QZVPP) levels of theory.     

Compact fibre-laser-pumped Ho:YLF oscillator–amplifier system

We developed a compact Ho:YLF oscillator–amplifier system in a novel setup to utilise the unpolarised pump power from a fibre laser efficiently, and produced 21.3 mJ at 1 kHz, with an M ² better than 1.1. The amplified energies agreed well with the predicted values from a two dimensional rotational symmetric amplifier model that we developed. The model considers upconversion losses and ground-state depletion, as well as the spatial distribution of the pump beam.     

Structure of a self-assembled hydrogen-bonded ‘living’ main chain liquid crystalline polymer

A main chain hydrogen-bonded liquid crystalline polymer was formed by melt mixing two complementary components, A and B, which in their individual states do not exhibit liquid crystallinity. The structure of the polymer and the thermal stability of its mesophase were studied using synchrotron radiation SAXS/WAXS/DSC at Daresbury (UK) and by variable temperature Fourier transform infrared. The chain extension, or “polymerization” process, was accelerated at the point when the polymer formed a liquid crystalline phase upon cooling from the isotropic melt. The polymer has an aabb chain structure and forms a smectic layer with a length of the A-B repeating unit. The hydrogen-bonded main chain polymer studied here is a monotropic liquid crystal. Above 150°C, it exhibits kinetic stabilization of its monotropic smectic phase. © 1998 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 36: 1617–1624, 1998