复数星图与单路的多染色拉姆齐数

对给定的简单图$H_1,H_2,\ldots,H_c$, 我们将使完全图$K_n$的任意边分解$\{G_i\}^c_{i=1}$都存在至少一个$G_i$有子图同构于$H_i$的最小正整数$n$称为多染色拉姆齐数 $R(H_1,H_2,\ldots,$ $H_c)$. 对正整数$m,n_1,n_2,\ldots,n_c$, 令$\Sigma=\sum_{i=1}^{c}(n_i-1)$. 在文献中,我们已经获得了$R(K_{1,n_1},\ldots,K_{1,n_c},P_m)$ 的一些界和精确值.Wang推测若$\Sigma\not\equiv 0\pmod{m-1}$且$\Sigma+1\ge (m-3)^2$, 则有$R(K_{1,n_1},\ldots, K_{1,n_c}, P_m)=\Sigma+m-1.$ 本文中, 我们给出了一个新的下界并给出$R(K_{1,n_1},\ldots,K_{1,n_c},P_m)$在$m\leq\Sigma$, $\Sigma\equiv k\pmod{m-1}$且$2\leq k \leq m-2$情况下的部分精确值. 这些结果部分证实了Wang的猜想.     

二元团簇VnC30/-(n=1～6)的光电子谱和密度泛函理论计算研究(英文)

过渡金属碳化物良好的催化性能依赖于其组成和形貌结构.研究碳化物的精确结构有利于理解它们的催化性能本质,但是极具挑战性,尤其是对于多组分多元体系.本文利用负离子光电子谱结合密度泛函理论计算研究了二元团簇V_nC₃^0/-(n=1～6)及其对应中性团簇的几何结构与电子结构.负离子光电子谱实验测得了该系列负离子团簇的绝热电子剥离能,即其对应中性团簇V_nC₃的电子亲和能.理论计算表明,在小尺寸团簇V_nC₃^0/-(n=1～3)中,碳原子与碳原子相互作用成键;随着团簇尺寸增加,主要是钒原子数目增加,碳原子与碳原子倾向于分离开,不再成键.与此同时,团簇中形成了钒-碳和钒-钒键.本文进一步研究了八原子团簇V_nC_m(n+m=8)的结构,并考察了团簇组成对该类八原子团簇的立方或类立方结构的影响.     

Raman spectrum study of graphite irradiated by swift heavy ions

Highly oriented pyrolytic graphites are irradiated with 40.5-Me V and 67.7-Me V ^112Sn-ions in a wide range of fluences： 1×10^11 ions/cm^2–1×10^14ions/cm^2. Raman spectra in the region between 1200 cm^-1 and 3500cm^-1 show that the disorder induced by Sn-ions increases with ion fluence increasing. However, for the same fluence, the amount of disorder is greater for 40.5-Me V Sn-ions than that observed for 67.7-Me V Sn-ions, even though the latter has a slightly higher value for electronic energy loss. This is explained by the ion velocity effect. Importantly, ～ 3-cm^-1frequency shift toward lower wavenumber for the D band and ～ 6-cm^-1 shift toward lower wavenumber for the 2D band are observed at a fluence of 1×10^14 ions/cm^2, which is consistent with the scenario of radiation-induced strain. The strain formation is interpreted in the context of inelastic thermal spike model, and the change of the 2D band shape at high ion fluence is explained by the accumulation of stacking faults of the graphene layers activated by radiation-induced strain around ion tracks. Moreover,the hexagonal structure around the ion tracks is observed by scanning tunneling microscopy, which confirms that the strains near the ion tracks locally cause electronic decoupling of neighboring graphene layers.     

PN结电容与正向直流偏压的关系

半导体PN结具有电容的性质．在正向直流偏压下,理论计算表明,PN结扩散电容的对数与正向偏压成正比．实验发现,当正向偏压小于30mV时,这种线性关系是成立的;当正向偏压大于30mV时,会偏离这种线性关系．由于PN结还具有电阻特性,对交流信号的相位有影响．随着正向偏压增大,交流信号的相位变化出现一极值．如果将PN结等效为一个电容和一个电阻并联,就可以定性解释这种变化关系．     

Noisy teleportation of qubit states via the Greenberger-Horne-Zeilinger state or the W state

The effects of distributing entanglement through the amplitude damping channel or the phase damping channel on the teleportation of a single-qubit state via the Greenberger--Horne--Zeilinger state and the W state are discussed. It is found that the average fidelity of teleportation depends on the type and rate of the damping in the channel. For the one-qubit affected case, the Greenberger--Horne--Zeilinger state is as robust as the W state, i.e., the same quantum information is preserved through teleportation. For the two-qubit affected case, the W state is more robust when the entanglement is distributed via the amplitude damping channel; if the entanglement is distributed via the phase damping channel, the W state is more robust when the noisy parameter is small while the Greenberger--Horne--Zeilinger state becomes more robust when it is large. For the three-qubit affected case, the Greenberger--Horne--Zeilinger state is more robust than the W state.     

Field—ion microscopy observation of single—walled carbon nanotubes

Field-ion microscopy(FIM),a tool for surface analysis with atomic resolution,has been employed to observe the end structure of single-walled carbon nanotubes(SWCNTs).FIM images revealed the existence of open SWCNT ends,Amorphous carbon atoms were also observed to occur around SWCNTs and traditional field evaporation failed to remove them.Heat treatment was found to be efficacious in altering the end structures of SWCNT bundles.Carbon and oxygen atoms released from heated tungsten filament are believed to be responsible for the decoration imposed on the SWCNT ends.     

Research on application of MOOC in optical packet switching

An experiment on receiving and identifying multiple optical orthogonal codes （MOOC） sequence-based optical labels in an optical packet switching （OPS） network is reported. Two groups of MOOC with a code length of 23 and a code weight of 3 are used to identify the optical labels. The scheme and principle of OPS networks based on MOOC sequence-based optical labels are presented. Because optical labels contain OPS and routing information, the importance of optical label processing with multiple inconsecutive, random, and burst optical labels in an OPS network is pointed out. Considering the MOOC-based optical labels, we design a circuit consisting of a broadened network and a cascaded amplifier to receive multiple groups of low-power narrow pulses （optical labels in the MOOC-OPS network） with a period of 2 ns. The successful experimental results demonstrate that the designed scheme is feasible.     

Single-layer broadband planar antenna using ultrathin high-efficiency focusing metasurfaces

Phase gradient metasurfaces(PGMS) offer a fascinating ability to control the amplitude and phase of the electromagnetic(EM) waves on a subwavelength scale, resulting in new applications of designing novel microwave devices with improved performances. In this paper, a reflective symmetrical element, consisting of orthogonally I-shaped structures, has been demonstrated with an approximately parallel phase response from 15 GHz to 22 GHz, which results in an interesting wideband property. For practical design, a planar antenna is implemented by a well-optimized focusing metasurface and excited by a self-designed Vivaldi antenna at the focus. Numerical and experimental results coincide well. The planar antenna has a series of merits such as a wide 3-d B gain bandwidth of 15–22 GHz, an average gain enhancement of 16 d B, a comparable aperture efficiency of better than 45% at 18 GHz, and also a simple fabrication process. The proposed reflective metasurface opens up a new avenue to design wideband microwave devices.     

电化学方法制备Si阵列微孔的工艺研究

对用电化学方法制备Si大孔阵列管坑工艺进行了初步探索。 通过对Si在KOH溶液中各向异性湿法蚀刻和在HF酸溶液中的电化学蚀刻过程中各种参数的摸索, 确定在室温下制备大孔阵列的最佳配比浓度, 蚀刻出符合要求的管坑阵列, 为进一步制备结构化闪烁屏奠定了实验基础。 The 3 D structures in silicon are increasingly coming to use in many fields. For example, the high resolution X ray digital imaging detector can be made by coupling CCD and the scintillating screen which is made by the array trenches filled with CsI(Tl). In the present work, we explored the technology of etching micro array on the n type silicon with high resistance. By studying the relative parameters of anisotropic etching of KOH and electro chemical etching of HF, the optimized concentration of HF was determined and the micro pore array trenches with 200 μm in depth were realized. The results establish an experimental base for further fabrication of the scintillating screen.     

基于IGES的激光扫描投影文件解析方法研究

激光扫描投影仪能够实现待装配零部件线框轮廓的精准位置投影,能够大幅度改善由传统装配方式所引起的精度差,效率低等问题。为了在自主研发的激光扫描投影系统中实现可直接读取IGES（初始化图形交互规范）格式的三维数模激光投影,研究了多特征图元提取和文件自动生成方法。该方法通过提取待投影线框图形的点、线、面等数据特征,以元胞的方式存储在.ply格式文档中,通过.ply文件对数控开关进行延时控制以及对二维振镜轨迹进行操控,实现更加智能化地控制激光扫描投影。应用12个IGES格式图元的投影实验验证,该方法可实现所有图元清晰投影且激光轮廓线宽优于0.3 mm,通过这种新型投影系统可提高车间装配生产效率,改善装配精度。