Polymerization of 1,3‐dienes with functional groups. III. Free‐radical polymerization of N,N‐diethyl‐2‐methylene‐3‐butenamide

Free‐radical homo‐ and copolymerization behavior of N,N‐diethyl‐2‐methylene‐3‐butenamide (DEA) was investigated. When the monomer was heated in bulk at 60 °C for 25 h without initiator, rubbery, solid gel was formed by the thermal polymerization. No such reaction was observed when the polymerization was carried out in 2 mol/L of benzene solution with with 1 mol % of azobisisobutyronitrile (AIBN) as an initiator. The polymerization rate (R_p) equation was R_p ∝ [DEA]^1.1[AIBN]^0.51, and the overall activation energy of polymerization was calculated 84.1 kJ/mol. The microstructure of the resulting polymer was exclusively a 1,4‐structure where both 1,4‐E and 1,4‐Z structures were included. From the product analysis of the telomerization with tert‐butylmercaptan as a telogen, the modes of monomer addition were estimated to be both 1,4‐ and 4,1‐addition. The copolymerizations of this monomer with styrene and/or chloroprene as comonomers were also carried out in benzene solution at 60 °C. In the copolymerization with styrene, the monomer reactivity ratios obtained were r₁ = 5.83 and r₂ = 0.05, and the Q and e values were Q = 8.4 and e = 0.33, respectively. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 999–1007, 2004     

Development and features of hydro-membrane gas chromatography.

Hydro-membrane gas chromatography (HMGC) is achieved by the annular condensation of water in a capillary column at less than 70 degrees C. The annular membrane of water is formed as a result of the wettability of the stationary phase, which is induced at a water contact angle ranging from 75 degrees to 79 degrees, as derived from a solubility parameter (delta) range of 15.7 +/- 0.3 MPa(1/2) of the coated resin. The range of the liquid to gas volume ratio (beta) required to support the annular membrane should be kept between 0.00005 and 0.0003. In the case of a 0.25-mm i.d. column, the ratio can be set by the combination of a 0.1 to 0.2 microl min(-1) water supply rate and helium gas flow rate. Separation by HMGC develops not only a gas-solid partition but also a focusing effect on the water membrane. One feature of HMGC is that it gives a non-adsorption chromatogram based on the blocking effect of pre-adsorbed water; furthermore, despite the presence of a relatively large quantity of water, the electron impact ionization efficiency is kept the same as in the usual GC/MS condition. The detection limit with the injection of 1 microl of aquatic solution was estimated to be less than 0.1 ppb of low-molecular-weight fatty acids with s/n = 5 on a mass chromatogram at m/z 45. The HMGC/EI-MS system can be applied to the trace analysis of C1 to C3 volatile acids, volatile inorganic acids, and halogenated organic acids in water.     

A novel pre-shearing technique for measurement of the electrorheological effect of a side-chain liquid crystalline polysiloxane

A side-chain liquid crystalline polysiloxane derivative possessing mesogens was synthesized. The mesogens included a large dielectrically-anisotropic moiety. Phase transition behaviour was investigated and the electrorheological (ER) effect of the polymer considered. No ER effect was observed in non-sheared polysiloxane derivative because of its high inherent viscosity. However, a large ER effect was observed after pre-shearing. Pre-shearing, i.e. shearing with a high shear rate before the measurements, arranges the terminal mesogens in the shearing direction. Furthermore, a dilution of the sample led to a larger ER effect exceeding 10 000 Pa. We thus were able to demonstrate a new approach for the appearance of the ER effect.     

Breakage of λ-DNA by inorganic tin and organotin compounds as environmental pollutants

In proportion to the environmental pollution problems caused by organotin compounds, the genotoxicities of tin compounds in the environments have become of interest so as to estimate their safety in recent years. In this work, isolated λ-DNA (double-strand DNA) was incubated with inorganic tin(II) and tin(IV) and five organotin compounds [n-butyltin trichloride, di(n-butyltin) dichloride, methyltin trichloride, dimethyltin dichloride and trimethyltin chloride] in reaction systems both with and without hydrogen peroxide (H₂O₂) content. The tin compounds tested in this study did not induce DNA breakage in the absence of hydrogen peroxide. Divalent inorganic tin (SnCl₂) and tetravalent inorganic tin (SnCl₄) caused DNA breakage in the presence of hydrogen peroxide (10 mM), and the DNA damage activity of inorganic tin was much more potent in divalent inorganic tin (SnCl₂) than in tetravalent inorganic tin (SnCl₄). Divalent inorganic tin (SnCl₂) induced DNA breakage in a concentration-dependent fashion at concentrations greater than 0.1 mM of SnCl₂ in the presence of hydrogen peroxide (10 mM). DNA breakage was not caused by n-butyltin compounds and methyltin compounds either in the presence or in the absence of hydrogen peroxide.     

Precise synthesis of porphyrin array scaffolding polyisocyanides

Aryl isocyanides bearing free‐base and metallo‐porphyrins were prepared and polymerized with a Pd–Pt μ‐ethynediyl complex as the initiator to give polymers with narrow polydispersity indices. The molecular weights of the resulting polymers were precisely controlled by the initial feed ratio of the porphyrin monomer to the initiator. The UV–VIS spectra suggested that the porphyrin pendants are regularly arranged to form stacked columns. Metallo‐porphyrin polymers were also prepared by reacting free‐base porphyrin polymers with metal salts. The successive reactions of free‐base and zinc‐porphyrin monomers resulted in the formation of diblock polymers. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 585–595, 2006     

Preparation and certification of the new reference materials; plastics (disk form, JSAC 0621-0625) for determination of mercury using x-ray fluorescent analysis.

The Japan Society for Analytical Chemistry has developed some new plastic certified reference materials (CRMs) for the analysis of mercury in polyester disks using XRF analysis. These CRMs (named as JSAC 0621-0625) were prepared by casting polyesters including a toluene solution of organometallic compounds as a standard. Concentrations of the five levels of mercury ranged from 0 to 250 mg/kg. Homogeneity tests of prepared disks had shown excellent results. Interlaboratory comparison study for the certification was performed by 15 laboratory participants. The z-scores in robust statistical method was applied for the evaluation of outliers. The certified values were assigned after discarding outliers. The uncertainties of certified values were determined as the confidence levels of 95%.     

Terpolymerization of sulfur dioxide or maleic anhydride with unsaturated compounds under ultraviolet irradiation

The effect of ultraviolet irradiation on the terpolymerization was investigated. In the terpolymerizations of sulfur dioxide–butene-1–acrylonitrile, sulfur dioxide–butene-1–n-butyl acrylate, and maleic anhydride–allyl chloride–acrylonitrile systems, the composition of the terpolymers prepared under ultraviolet irradiation was different from those prepared in the dark. The unit content of sulfur dioxide and butene-1 or of maleic anhydride and allyl chloride in the terpolymer increased under ultraviolet irradiation. The nature of the growing end under ultraviolet irradiation is supposed to be the same as that of the dark polymerization on the basis of the same solvent effect on the terpolymer composition, the rate of polymerization and the molecular weight of polymer. The experimental results suggest that the complex between sulfur dioxide and butene-1 or maleic anhydride and allyl chloride might be excited by ultraviolet light and the excited complex may participate in the terpolymerization.     

Method of the orthonormality-constrained variation

The orthonormality-constrained variation method is developed, the application of which gives an exact SCF equation. The variational procedure used in deriving the equation clarifies the source and meaning of two kinds of arbitrary parameters which appear by the use of the method of lagrangean multipliers.