激光能量对反钙钛矿GaCMn_3薄膜结构与物性的影响

本文采用脉冲激光沉积方法在LaAlO3(001)单晶衬底上制备了反钙钛矿GaCMn3薄膜,通过控制制备过程中脉冲激光的能量,研究了不同激光能量条件对GaCMn3薄膜结构与物理性能的影响.分别利用X射线衍射仪、原子力显微镜、超导量子干涉仪和物理性能测试系统,对所制备的薄膜的晶体结构、表面形貌和磁性、电输运性质进行了研究.结果表明,制备的样品均为具有多个晶面取向的反钙钛矿薄膜,且薄膜结构和物性明显随制备激光能量的变化而变化.当激光能量为450mJ时,制备的薄膜多晶面取向性最弱,结晶性和表面形貌最优良.实验所得的薄膜均表现出顺磁-铁磁-反铁磁相转变,然而转变过程比块材较平缓,同时薄膜的电阻率并未表现出块材中的突变特征,我们推测该现象很可能是由衬底的应力及衬底的晶格膨胀对薄膜反常晶格变化的抑制作用造成的.     

等离子体噻吩聚合膜的研究及I+注入的掺杂效应

以噻吩为单体,在等离子体环境中聚合成致密的有机膜。利用Rutherford背散射(RB2S)和质子弹性反冲(ERD)、傅里叶红外谱(FTIR)测定了膜的成分和结构;从近红外-可见-紫外光的反射和透射谱,运用传递矩阵方法研究了膜的光学性质;此外,还探讨了24keV的I⁺离子束的注入对等离子体噻吩聚合膜的掺杂效应。结果表明,注入层内电荷载流子的输运机理可用Mott的可变自由程跳跃(VRH)理论给以解释。 关键词：     

单晶光纤损耗谱测量装置

本文描述了一套用以测量单晶光纤损耗谱的装置。本装置由卤钨灯,单色仪,积分球,AgORbCs光电倍增管以及数据采集,处理和控制系统组成。可测量300～1150nm的光谱范围。利用本装置可获得单晶光纤的吸收光谱,透过率谱,散射光谱以及散射位置谱。     

Triterpenoid Constituents of Huperzia miyoshiana

Thirteen triterpenoids, including three new ones, miyoshianois A (1), B (2) and C (3), were isolated from Huperzia miyoshiana. The structures of these new compounds were established as 3-O-dihydroferuloyltohogenol (1), 16-oxo-3β,21β-dihydrox-y-serrat-14-en-24-ferulate (2) and 16-oxo-3a, 21β-dihydroxy-serrat-14-en-24-ferulate (3), respectively, on the basis of their spectroscopic analysis.     

PHASE INVERSION AND ITS MECHANICAL MODEL STUDIES FOR THE TWO-PHASE POLYMER BLEND SYSTEMS (Ⅱ)——DYNAMIC VISCOELASTIC RESPONSE

The dynamic viscoelastic response of the two-phase polymer blend systems shows the characteristics of the thermorheologically complex materials. In this paper theoretical equations for describing the dynamic viscoelastic response of such polymer blend systems have been established by means of the mechanical modeling technique. The dynamic viscoelastic response of the blend systems at any blend composition can be predicted theoretically by using the equations established, provided that the dynamic viscoelastic response of the two pure components and the mechanical model parameters are known in advance. Thus, we provide an effective method for studying the dynamic mechanical properties and the molecular relaxation characteristics of the two-phase polymer blend systems.     

新型氮芥和卤代烷基哌嗪芳香醛的合成

通过对Vilsmeier反应、烷基化反应和氯化反应的改进提出了以简单易得的苯胺和苯基哌嗪为原料制备氮芥和哌嗪芳香醛的方法. 采用该改进的方法合成了8个氮芥和哌嗪芳香醛, 其中7个为新化合物. 它们的结构均经质谱、红外光谱、核磁共振谱和元素分析确证.     

ICP-AES法同时测定TiNi形状记忆合金中杂质Co、Cu、Cr、Fe、Nb

研究建立了ICP—AES同时测定TiNi形状记忆合金中Co、Cu、Cr、Fe、Nb5元素的方法。进行了必要的条件试验，选择了分析线及其他仪器工作参数；考察了方法检出限、H2SO4酸度及基体钛、镍对测定的影响、工作曲线线性。进行了准确度和精密度试验，各元素的加标回收率为Co98．4％。99．6％、Cu98．0％～103％、Cr98.9％～99．6％、Fe94．6％～95．8％、Nb99．8％。102％。5种元素的相对标准偏差范围为4．2％-10％。     

用X-射线衍射法测定聚对苯二甲酸乙二醇酯/聚对苯二甲酸丁二醇酯共混体系的结晶度

Based on Hermans and Weidinger postulate that the crystalline fraction is proportional to crystalline intensity Ic and that the amorphous fraction is proportional to amorphous intensity Ia, it is. Suggseteet that for PBT/PET blends we assume that the intensity at 18. 2° is completely originated from amorphous scattering. The separation between the peaks at 17. 2° and 20. 8° is 3. 6°m, which is regarded as large enough to justify this assumption. Thus , it is possible to draw an acceptable demaraction line between the crystalline and amorphous scattering. The degree of crystallinity Xc is given by X_c-I_c/(I_c+KI_a),coefficient K is available by the values of Ic plotted against the values of Ia.For PBT/PET blends,we obtain that K is 0.95 and that correlation coefficient is 0.92 According to the method revieved above,we investi-gated the crystallinity of PBT/PET blends prepared by different ways.     

多组分体系同时定性定量测定的逐步回归分析法

阐述了逐步回归分析法用于多组分体系同时定性定量分析的原理、实验及数据处理方法。分析了硝基酚类人工样、未知样及合成样。该法可用于仅知可能含有的组分范围的样品分析。     

Formation and Structure of [Al_(13)(μ_3-OH)_6(μ_2-OH)_6(μ_2-OH)_(12)(H_2O)_(24)]Cl_(15)·13H_2O

1 INTRODUCTION At present, the polyaluminium compounds are mainly studied by single-crystal X-ray diffraction method to obtain the components, structures and exis- tence forms of aluminium in hydrolysis system, and then hydrolysis courses and mechanisms of each hydrolytic polyaluminium cation could be further dis- closed[1～5]. Generally, the single crystals suitable for X-ray diffraction are obtained from the crystallization of polyaluminium cations into sulfates or selenates. Following …