Low temperature plasma production of hydrogenated nanocrystalline silicon thin films

The hydrogenated nanocrystalline silicon (nc-Si:H) thin films were produced by capacitively-coupled plasma enhanced chemical vapor deposition (PECVD) technique at low substrate temperatures (T_s ≈ 40–200 °C). Firstly, for particular growth parameters, the lowest stable T_s was determined to avoid temperature fluctuations during the film deposition. The influence of the T_s on the structural and optical properties of the films was investigated by the Fourier transform infrared (FTIR), UV–visible transmittance/reflectance and X-ray diffraction (XRD) spectroscopies. Also, the films deposited at the center of the PECVD electrode and those around the edge of the PECVD electrode were compared within each deposition cycle. The XRD and UV–visible reflectance analyses reveal the nanocrystalline phase for the films grown at the edge at all T_s and for the center films only at 200 °C. The crystallinity fraction and lateral dark conductivity decrease with lowered T_s. FTIR analyses were used to track the hydrogen content, void fraction and amorphous matrix volume fraction within the films. The optical constants obtained from the UV–visible transmittance spectroscopy were correlated well with the FTIR results. Finally, the optimal T_s was concluded for the application of the produced nc-Si:H in silicon-based thin film devices on plastic substrates.     

First-principles studies of the electronic structure and optical properties of AgBO<Subscript>3</Subscript> (B=Nb,Ta) in the paraelectric phase

The electronic energy-band structure, density of states (DOS), and optical properties of AgBO₃ in the paraelectric cubic phase have been studied by using density functional theory within the local density approximation for exchange-correlation for the first time. The band structure shows a band gap of 1.533 eV (AgNbO₃)and 1.537 eV (AgTaO₃)at (M-⌈)point in the Brillouin zone. The optical spectra of AgBO₃ in the photon energy range up to 30 eV are investigated under the scissor approximation. The real and imaginary parts of the dielectric function and — thus the optical constants such as reflectivity, absorption coefficient, electron energy-loss function, refractive index, and extinction coefficient — are calculated. We have also made some comparisons with related experimental and theoretical data that is available.      

Temperature and magnetic field responsive hyaluronic acid particles with tunable physical and chemical properties

We report the preparation and characterization of thiolated-temperature-responsive hyaluronic acid-cysteamine-N-isopropyl acrylamide (HA-CYs-NIPAm) particles and thiolated-magnetic-responsive hyaluronic acid (HA-Fe-CYs) particles. Linear hyaluronic acid (HA) crosslinked with divinyl sulfone as HA particles was prepared using a water-in-oil micro emulsion system which were then oxidized HA-O with NaIO₄ to develop aldehyde groups on the particle surface_. HA-O hydrogel particles were then reacted with cysteamine (CYs) which interacted with aldehydes on the HA surface to form HA particles with cysteamine (HA-CYs) functionality on the surface. HA-CYs particles were further exposed to radical polymerization with NIPAm to obtain temperature responsive HA-CYs-NIPAm hydrogel particles. To acquire magnetic field responsive HA composites, magnetic iron particles were included in HA to form HA-Fe during HA particle preparation. HA-Fe hydrogel particles were also chemically modified. The prepared HA-CYs-NIPAm demonstrated temperature dependent size variations and phase transition temperature. HA-CYs-NIPAm and HA-Fe-CYs particles can be used as drug delivery vehicles. Sulfamethoxazole (SMZ), an antibacterial drug, was used as a model drug for temperature-induced release studies from these particles.     

Determining co-combustion characteristics,kinetics and synergy behaviors of raw and torrefied forms of two distinct types of biomass and their blends with lignite

Journal of Thermal Analysis and Calorimetry - In this study, the combustion characteristics and kinetics of various mixtures of both raw and torrefied rose pulp and red pine sawdust with each other...     

Photochemical reactions of M(CO)6 (M = Cr,Mo, W) with Ph2P(S)P(S)Ph2

New complexes {M(CO)₄[Ph₂P(S)P(S)Ph₂]} (M = Cr, Mo and W), (1a)–(3a), [(1a), M = Cr; (2a), M = Mo; (3a), M = W] and {M₂(CO)₁₀[-Ph₂P(S)P(S)Ph₂]} (M = Cr, Mo, W), [(1b)–(3b) [(1b), M = Cr; (2b), M = Mo; (3b), M = W]] have been prepared by the photochemical reaction of M(CO)₆ with Ph₂P(S)P(S)Ph₂ and characterized by elemental analyses, f.t.-i.r. and ³¹P-(¹H)-n.m.r. spectroscopy and by FAB-mass spectrometry. The spectra suggest cis-chelate bidentate coordination of the ligand in {M(CO)₄[Ph₂P(S)P(S)Ph₂]} and cis-bridging bidentate coordination of the ligand between two metals in (M = Cr, Mo and W).     

An Easy Synthesis of Monofluorinated Derivatives of Pyrroles from β-Fluoro-β-Nitrostyrenes

The catalyst-free conjugate addition of pyrroles to β-Fluoro-β-nitrostyrenes was investigated. The reaction was found to proceed under solvent-free conditions to form 2-(2-Fluoro-2-nitro-1-arylethyl)-1H-pyrroles. The effectiveness of this approach was demonstrated through the preparation of a series of the target products in a quantitative yield. The kinetics of a conjugate addition of pyrrole was studied in detail to reveal the substituent effect and activation parameters of the reaction. The subsequent base-induced elimination of nitrous acid afforded a series of novel 2-(2-Fluoro-1-arylvinyl)-1H-pyrroles prepared in up to an 85% isolated yield. The two-step sequence herein proposed is an indispensable alternative to a direct reaction with elusive and unstable 1-Fluoroacetylenes.     

Solvothermal synthesis of WO3/TiO2/carbon fiber composite photocatalysts for enhanced performance under sunlight illumination

Carbon fiber (CF)‐based WO₃/TiO₂ composite catalysts (WO₃/TiO₂/CF) were successfully synthesized by solvothermal method. The catalysts were characterized by XPS, SEM, BET, XRD, FTIR, Raman and UV–Vis. The analyses confirmed the WO₃/TiO₂ nanoparticles with high crystallinity deposited on the carbon structure. The photocatalytic degradation of Orange II azo dye under UV and sunlight illumination with the synthesized catalyst was explored. The composite catalyst displayed high performance (85%) for Orange II degradation while that of for WO₃/TiO₂ was found as 76%. The effects of CF amount, solution pH, initial dye concentration and catalyst dose on photocatalytic performance were studied. It was found that the degradation efficiency increased from 68% to 90% with the increasing CF amount from 3 wt% to 5 wt%, while the further increase in CF amount (7–10 wt%) decreased the photodegradation due to the blocking the active sites of WO₃/TiO₂. The enhanced photocatalytic efficiency was mainly attributed to the electrical properties of the CF and reduced bandgap.     

A unique continuation result for the plate equation and an application

In this paper, we prove the unique continuation property for the weak solution of the plate equation with the low regular coefficient. Then, we apply this result to study the global attractor for the semilinear plate equation with a localized damping. Copyright © 2015 John Wiley & Sons, Ltd.     

Genocchi polynomials associated with the Umbral algebra

The aim of this paper is to study on the Genocchi polynomials of higher order on P, the algebra of polynomials in the single variable x over the field C of characteristic zero and P^∗, the vector spaces of all linear functional on P. By using the action of a linear functional L on a polynomial p(x) Sheffer sequences and Appell sequences, we obtain some fundamental properties of the Genocchi polynomials. Furthermore, we give relations between, the first and second kind Stirling numbers, Euler polynomials of higher order and Genocchi polynomials of higher order.