Adhesive bonding of glassy polymer surfaces by an ultrathin layer of a semicrystalline polymer

To develop a greater understanding of interfacial interactions between a semicrystalline polymer and a glassy polymer, adhesion tests were performed on very thin layers of poly(ethylene oxide) (PEO) sandwiched between two layers of poly(tetramethyl bisphenol A polycarbonate) (TMPC). The tests were designed to provide intimate contact between the surfaces while they were heated above the melting point of the PEO and cooled back to room temperature. A contact mechanics approach, based on the Johnson, Kendall, and Roberts theory, was used to determine values of the energy release rate describing the energetic driving force for crack propagation within the interfacial region. The ability to measure crack propagation at large values of the energy release rate was limited by rupture of the silicone elastomer that was used to provide a sufficiently compliant matrix for the adhesion experiment. By cycling the tensile stress at relatively low loading levels, we were able to measure fatigue crack propagation at values of the energy release rate that did not result in failure of the elastomer. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 3809–3821, 2004     

Rheological properties of binary associating polymers

Dynamics of associating polymer solutions above the reversible gelation point are studied. Each macromolecule consists of a soluble backbone (B) and a small fraction of specific strongly interacting groups (A or C stickers) attached to B. A mixture of B–A and B–C associating polymers with 1:1 stoichiometric ratio is considered. As a result of AC association, the polymers reversibly gelate above the overlap concentration. It is shown that (1) the network strands are linear complexes (double chains) of B–A and B–C; (2) “diffusion” of the network junction points is characterized by an apparent activation energy, which can be significantly higher than the energy of one AC bond; (3) most importantly, the randomness of sticker distribution along the chain can significantly slow down the network relaxation leading to a markedly non-Maxwellian viscoelastic behavior. The theory elucidates the most essential features of rheological behavior of polysaccharide associating systems (with A = adamantyl moiety, C = β-cyclodextrin, B = either chitosan or hyaluronan) including similar behavior of G ^′ and G ^″ in a wide frequency range, strong temperature dependence of the characteristic frequency ω _x , and an extremely strong effect of added free stickers (fC) on the dynamics. This paper was presented at Annual European Rheology Conference (AERC) held in Hersonisos, Crete, Greece, April 27–29, 2006.     

Facile syntheses of surface-functionalized micelles and shell cross-linked nanoparticles

Block copolymer micelles and shell cross-linked nanoparticles (SCKs) presenting Click-reactive functional groups on their surfaces were prepared using two separate synthetic strategies, each employing functionalized initiators for the controlled radical polymerization of acrylate and styrenic monomers to afford amphiphilic block copolymers bearing an alkynyl or azido group at the α-terminus. The first route for the synthesis of the azide-functionalized nanostructures was achieved via sequential nitroxide-mediated radical polymerization (NMP) of tert-butyl acrylate and styrene, originating from a benzylic chloride-functionalized initiator, followed by deprotection of the acrylic acids, supramolecular assembly of the block copolymer in water and conversion of the benzylic chloride to a benzylic azide. In contrast, the second strategy utilized an alkynyl-functionalized reversible addition fragmentation transfer (RAFT) agent directly for the RAFT-based sequential polymerization of tetrahydropyran acrylate and styrene, followed by selective cleavage of the tetrahydropyran esters to give the α-alkynyl-functionalized block copolymers. These Click-functionalized polymers, with the functionality located at the hydrophilic polymer termini, were then self-assembled using a mixed-micelle methodology to afford surface-functionalized “Clickable” micelles in aqueous solutions. The optimum degree of incorporation of the Click-functionalized polymers was investigated and determined to be ca. 25%, which allowed for the synthesis of well-defined surface-functionalized nanoparticles after cross-linking selectively throughout the shell layer using established amidation chemistry. Functionalization of the chain ends was shown to be an efficient process under standard Click conditions and the resulting functional groups revealed a more “solution-like” environment when compared to the functional group randomly inserted into the hydrophilic shell layer. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 5203–5217, 2006     

Reactions of tetrahydro-as-triazine-3(2H)-thiories with α, β-difunctional compounds

The results of allowing tetrahydro-as-triazine-3(2H)-thiones to react with various α,β-diiunctional compounds, such as, α-bromoethyl p-toluenesulfonate, chloroacetaldehyde, α-bromophenylacet-uldehyde, phenaeyl bromide, chloroacetonitrile, α-bromophenylaeelonitrile, and α-cyanobenzyl p-toluenesulfonate are discussed. These condensations give either a 5H-thiazolo[3,2-b]-as-triazine or a 2H-thiazolo[2,3-c]-as-triazine.     

Accurate local spin-polarized exchange potential: Reconciliation of generalized Slater and Kohn–Sham methods

Using simple physical arguments, a local spin-polarized exchange potential, V_xσ, is constructed from the single-particle Hartree–Fock (HF ) potentials (generalized Slater method) that reduces to the usual Kohn–Sham (KS ) result in the uniform gas limit. Numerical results for 10 closed subshell atoms demonstrate that the total energy calculated employing this V_xσ is closer to the exact KS results than those of other standard exchange approximations with electron densities and highest occupied orbital eigenvalues that closely approximate the HF results.     

High-resolution spectroscopy of induced chiral dimers: a study of the dimers of ethanol by Fourier transform microwave spectroscopy

We present the first recording of the high-resolution spectrum of an induced chiral dimer. Three conformers of the induced chiral dimers of ethanol have been observed using a pulsed molecular-beam Fourier transform microwave spectrometer. The rotational constants of the normal isotopomers of the three species have been determined to be (a) A=5113.826(5), B=1329.7214(4), and C=1257.5151(3) MHz, (b) A=5086.459(5), B=1316.6508(4), and C=1243.6329(4) MHz, and (c) A=4851.608(5), B=1369.7558(6), and C=1243.4184(4) MHz. The observed species have been assigned to calculated structures via Kraitchman double substitution analyses and ab initio calculations. The Kraitchman analyses and the fitted centrifugal distortion parameters suggest that the deuterium bond is significantly stronger than the hydrogen bond in the dimers of ethanol.     

Assignments of carbon NMR resonances for microcrystalline ubiquitin

Solid-state NMR 2D spectroscopy was used to correlate carbon backbone and side-chain chemical shifts for uniformly (13)C,(15)N-enriched microcrystalline ubiquitin. High applied field strengths, 800 MHz for protons, moderate proton decoupling fields, 80-100 kHz, and high magic angle sample spinning frequencies, 20 kHz, were used to narrow the most of the carbon line widths to 0.5-0.8 ppm. Homonuclear magnetization transfer was effected by matching the proton RF field to the spinning frequency, the so-called dipolar-assisted rotational resonance (DARR) (Takegoshi, K.; Nakamura, S.; Terao, T. Chem. Phys. Lett. 2001, 344, 631-637), and a mixing time of 20 ms was used to maximize the intensity of one-bond transfers between carbon atoms. This polarization transfer sequence resulted in roughly 14% transfer efficiencies for directly bonded carbon pairs and 4% transfer efficiencies for carbons separated by a third carbon. With this simple procedure, the majority of the one-bond correlations was observed with moderate transfer efficiencies, and many two-bond correlations were also observed with weaker intensities. Spin systems could be identified for more than half of the amino acid side chains, and site-specific assignments were readily possible via comparison with 400 MHz (15)N-(13)C-(13)C correlation spectroscopy (described separately).