三维随机Ising模型的亚稳态性(Ⅱ)

讨论三维格点环面上随机Ising模型当温度趋向零时的亚稳态性,确定从自旋全为-1的组态到自旋全为+1的组态的最大似然路径和临界组态,并计算出从自旋全为-1的组态出发首次到达自旋全为+1的组态的首达时间的渐近对数估计。证明利用一族带指数扰动的Markov链的大偏差估计。     

湍流Prandtl数

依据J.O.Hinze的理论,研究湍流Prandtl数随分子Prandtl数和流动条件参数变化的规律,并解释有关实验结果。     

Interaction Between HMG Proteins (1+2) and the Negative Regulatory Region 1(NCR1) in the 5''''-flanking Sequence of the Human β-globin Gene

The pattern of high mobility group proteins 1 and 2 (HMG1,2) interaction with the 5'-flanking sequence of the human β-globin gene has been analyzed by scanning tunnelling microscopy (STM). A 200 bp negative regulatory region in the 5'-flanking sequence of the human β-globin gene can be folded by HMG proteins 1 and 2 into a circular structure (diameter 70±6) with a linear tail which seems to be a left-handed double helix structure.     

A DOUBLE-TEMPERATURE-GRADIENT TECHNIQUE FOR THE GROWTH OF PURE C60 SINGLE CRYSTALS FROM THE VAPOR PHASE

Pure C₆₀ single crystals were grown by a sublimation-condensation method in an evacuated dosed quartz tube situated in a double-temperature-gradient furnace. Large C₆₀ single crystals, up to a size of 0.6 mm×1.0 mm×2.0 mm with quite smooth and shiny faces, were obtained. X-ray diffraction, electron diffraction and X-ray morphology were carried out and showed that the quality of large C₆₀ single crystals grown by the double-temperature-gradient technique is excellent. In this paper the experimental results of the growth of large C₆₀ single crystals are reported and the morphological and structural characterizations are discussed in detail.     

(Fe0.1Co0.55Ni0.35)78Si8B14金属玻璃的晶化过程及压力的影响(Ⅰ)——晶化时的相析出过程

用X射线衍射法研究了(Fe_0.1Co_0.55Ni_0.35)₇₈Si₈B₁₄金属玻璃在常压下及20kbar高压下晶化过程中的析出相及析出过程。结果表明在上述压力下晶化过程都分成两个阶段,分别对应于初级晶化和共晶晶化。在常压下,初级晶化时析出fcc-Co晶体,而共晶晶化对应着Ni₃₁Si₁₂和(FeCoNi)₃(SiB)相的析出。随着回火温度的增高或时间的延长,(FeCoNi)₃(SiB)相逐渐转变为(FeCoNi)₂₃B₆相。20kbar高压下的晶化析出过程与常压下不同的是:提高了晶化温度,在共晶晶化阶段出现了Co₂B相。此外,压力还阻止(FeCoNi)₂₃B₆相的形成。从热力学和动力学的角度讨论了压力对金属玻璃晶化过程的影响。 关键词：     

HL—1装置等离子体密度反馈实验

本文叙述HL-1装置用反馈脉冲补充送气方式控制等离子体密度的方法及实验结果。给出了在固有的物理实验条件下的最佳反馈方式,实现了对密度的有效控制及反馈。讨论了在不同密度条件下的几种反馈方式及反馈系统尚存在的不足之处。     

A(B0.51B0.52)O3系统中三种有序态的稳定性初探

在A(BB_0.5¹B_0.5²)O₃钙钛矿型铁电陶瓷材料中,除了在较高温度下都能有稳定的<111>型超格子有序结构外,在室温和-150℃情况下,还分别观察到1/2<110>和1/2<100>型超格子有序结构,本文引入长程相互作用,并利用8点集团变分模型,在不同温度范围内分析了前面三种有序态的稳定性,所得结论与实验结果一致。 关键词：     

跳扩散模型中亚式期权的定价

本文研究一类跳扩散模型中亚式期权的定价问题，得到了关于算术平均亚式期权的一个简单而统一的算法，并用偏微分方程的技巧将其定价问题归结为一个与路径依赖量无关的一维积分-微分方程的求解问题．     

Further Acceleration of MeV Electrons by a Relativistic Laser Pulse

With the development of photocathode rf electron gun, electrons with high-brightness and mono-energy can be obtained easily. By numerically solving the relativistic equations of motion of an electron generated from this facility in laser fields modelled by a circular polarized Gaussian laser pulse, we find the electron can obtain high energy gain from the laser pulse. The corresponding acceleration distance for this electron driven by the ascending part of the laser pulse is much longer than the Rayleigh length, and the light amplitude experienced on the electron is very weak when the laser pulse overtakes the electron. The electron is accelerated effectively and the deceleration can be neglected. For intensities around 10¹⁹ W•μm²/cm², an electron's energy gain near 0.1 GeV can be realized when its initial energy is 4.5 MeV, and the final velocity of the energetic electron is parallel with the propagation axis. The energy gain can be up to 1 GeV if the intensity is about 10²¹ W•μm²/cm². The final energy gain of the electron as a function of its initial conditions and the parameters of the laser beam has also been discussed.     

分析信息机房热环境的加权等效温差法

信息机房是集中存储和管理各类数据处理设备的建筑空间,其热环境的好坏对于各类数据处理设备的连续稳定运行具有重要意义。本文在回顾近年来对机房热环境分析、评价方面的研究基础上,提出了热量加权等效温差法,从考察传热能力损失的角度重新分析机房内的传热和流动过程。以地板送风为例,建立一个实际机房模型,通过数值模拟,将目前常用的机房热环境评价方法与加权等效温差分析结果进行对比,验证该方法的可行性。计算表明,加权等效温差分析方法不仅能有效刻画机房气流组织和热源的分布特性,还能分析由此带来的冷热气流掺混、冷量输配不均等导致机房冷却效率低下的各类因素,并提出相应的改进措施,对信息机房的节能运行有重要的指导意义。