Divinylsiloxane‐bisbenzocyclobutene‐based polymer modified with polystyrene–polybutadiene–polystyrene triblock copolymers

Divinylsiloxane‐bisbenzocyclobutene (DVS‐bisBCB) polymer has very low dielectric constant and dissipation factor, good thermal stability, and high chemical resistance. The fracture toughness of the thermoset polymer is moderate due to its high crosslink density. A thermoplastic elastomer, polystyrene–polybutadiene–polystyrene triblock copolymer, was incorporated into the matrix to enhance its toughness. The cured thermoset matrix showed different morphology when the elastomer was added to the B‐staged prepolymer or when the elastomer was B‐staged with the DVS‐bisBCB monomer. Small and uniformly distributed elastomer domains were detected by transmission electron micrographs (TEM) in the former case, but TEM did not detect a separate domain in the latter case. A high percentage of the polystyrene–polybutadiene–polystyrene triblock copolymer could be incorporated into the DVS‐bisBCB thermoset matrix by B‐staging the triblock copolymer with the BCB monomer. The elastomer increased the fracture toughness of DVS‐bisBCB polymer as indicated by enhanced elongation at break and increased K1c values obtained by the modified edge‐lift‐off test. Elastomer modified DVS‐bisBCB maintained excellent electrical properties, high T_g and good thermal stability, but showed higher coefficient of linear thermal expansion values. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 1591–1599, 2006     

(1-Adamantanethio)pyridines and tetrahydropyridines from the reaction of 1-adamantanethiol with pyridine I-oxide in acetic anhydride

The reaction of pyridine 1-oxide with 1-adamantanethiol in acetic anhydride produced a mixture of 2- and 3-(1-adamantanethio)pyridines, 1-aeetyl-2-(1-adamantanethio)-3-hydroxy-4-acetoxy-1,2,3,4-telrahydropyridine and the corresponding 3-acetoxyderivative. Pure substances were separated by means of column chromatography on alumina. The tetrahydropyridines were identified by means of their proton magnetic and mass spectra. 4-(1-Adamantanethio)pyridine was synthesized from 4-chloropyridinc and 1-adamantanethiol. The three isomeric (1-adamantanethio)-pyridines were, each, cleaved by concentrated hydrochloric acid to give 1-chloroadamantane and the corresponding pyridinethiol.     

Evaluation of a complete HPLC solvent optimization system involving piece-wise quadratic modelling

Summary Interpretive methods are accepted to give the best possible results for selectivity optimization in HPLC. However the methods are very complex, and most work so far has been detailed academic studies. This paper describes an evaluation of a complete integrated system incorporating peak labelling, modelling of retention behaviour and calculation of response surfaces, with particular emphasis on the retention modelling. The peak labelling section has been discussed previously.A piece-wise quadratic function is investigated for the modelling of retention times across an isoeluotropic plane to effect selectivity optimization in HPLC. This requires 10 data-points on the isoeluotropic plane. The predicted global optimum and local optima are evaluated by comparison of calculated and experimental retention data, for a nine component sample. Seven interstitial points, distributed across the whole plane between the data-points, are similarly evaluated for a related sample. The typical error (in retention time) is less than 2%, often 1%, and the maximum error is 4.2%. At the global optimum the error was found be less than 1.3% for all 9 peaks.     

Morphology-dependent stimulated Raman scattering (MDSRS)

A novel non-linear Raman spectroscopic technique, which can be used to characterize the chemical composition of the interface region of volatile aerosol particles, is described. The technique is morphology-dependent stimulated Raman scattering (MDSRS). We discuss the phenomenology behind this new optical probe, and present experimental results which show that this technique can be used as quantitative spectroscopic tool. We outline the potential application of MDSRS to in situ gas—aerosol kinetics and dynamics studies.     

Enhancing selectivity in oxidation catalysis with sol-gel nanocomposites

Valuable organic compounds such as alpha-hydroxy acids are easily synthesised with relevant selectivity enhancement using a sol-gel hydrophobized nanostructured silica matrix doped with the organocatalyst TEMPO: A materials science based synthetic route which cannot be achieved via classical homogeneous synthesis.     

Trypsin activity assay in substrate-specific one- and two-dimensional gels: a powerful method to separate and characterize novel proteases in active form in biological samples

To separate and identify the proteases, a substrate-specific, sensitive assay in sodium dodecyl sulfate (SDS)-polyacrylamide gels after two-dimensional (2-D) electrophoresis has been developed. This method allows simultaneous determination of protease cleavage specificity, molecular weight, isoelectric point, and if necessary, amino acid sequencing. After isoelectric focusing in immobilized pH gradient (IPG) strips (pH 6-11) (first dimension), trypsin was electrophoresed in 12% SDS polyacrylamide gels (second dimension) copolymerized with Boc-Gln-Ala-Arg-MCA (4-methyl-coumaryl-7-amide). The gels were washed in cold 2.5% Triton X-100 and water, and incubated in assay buffer (6.3 mM Bicine, 100 mM NaCl). Trypsin cleavage of the peptide-MCA generated fluorescent 7-amino-4-methyl-coumarin. In 1-D gels, as low as 500 pg trypsin could be detected and trypsin band volumes correlated linearly with the amounts of trypsin (R(2) = 0.999). In 2-D gels, the lowest amount of trypsin detected was 1 ng. The linear regression of spot volume and loading amount was still good (R(2) = 0.974). To optimize renaturation conditions, 5x5 min washes with 2.5% Triton X-100 and water, respectively, gave the strongest band volume. For fluorescence development, an assay buffer at pH 9 was the best; incubation at 37 degrees C for 30 min was sufficient. The method has application for identifying novel proteases as it does not rely on antibodies.     

Saturation of Berge hypergraphs

Given a graph $F$, a hypergraph is a Berge- $F$ if it can be obtained by expanding each edge in $F$ to a hyperedge containing it. A hypergraph $H$ is Berge-$F$-saturated if $H$ does not contain a subhypergraph that is a Berge-$F$, but for any edge $e\in E\left(\overline{H}\right)$, $H+e$ does. The $k$-uniform saturation number of Berge-$F$ is the minimum number of edges in a $k$-uniform Berge-$F$-saturated hypergraph on $n$ vertices. For $k=2$ this definition coincides with the classical definition of saturation for graphs. In this paper we study the saturation numbers for Berge triangles, paths, cycles, stars and matchings in $k$-uniform hypergraphs.     

pH‐controlled reaction divergence of decarboxylation versus fragmentation in reactions of dihydroxyfumarate with glyoxylate and formaldehyde: parallels to biological pathways

The reactions of dihydroxyfumarate with glyoxylate and formaldehyde exhibit a unique pH‐controlled mechanistic divergence leading to different product suites by two distinct pathways. The divergent reactions proceed via a central intermediate (2,3‐dihydroxy‐oxalosuccinate, 3 , in the reaction with glyoxylate and 2‐hydroxy‐2‐hydroxymethyl‐3‐oxosuccinate, 14 , in the reaction with formaldehyde). At pH 7–8, products ( 7 , 8 , and 15 ) exclusively from a decarboxylation of the intermediate are observed, while at pH 13–14, products ( 9 , 10 , and 16 ) solely derived from a hydroxide‐promoted fragmentation of the intermediate are formed. The decarboxylative and fragmentation pathways are mutually exclusive and do not appear to coexist under the range of pH (7–14) conditions investigated. Herein, we employ a combination of quantitative ¹³C NMR measurements and density functional theory calculations to provide a rationale for this pH‐driven reaction divergence. These rationalizations also hold true for the reactions of dihydroxyfumarate produced in situ by the catalytic cyanide‐mediated dimerization of glyoxylate. In addition, the non‐enzymatic decarboxylation and fragmentation transformations of these central intermediates ( 3 and 14 ) appear to have intriguing parallels to the enzymatic reactions of oxalosuccinate and formation of glyceric acid derivatives in extant metabolism – the high and low pH mimicking the precise control exerted by the enzymes over reaction pathways. Copyright © 2016 John Wiley & Sons, Ltd.     

Improved solution of displacements due to a compacting reservoir over a rigid basement

Geertsma’s analytical method is often used to compute strain and stress changes around a compacting geological reservoir. The present work extends Geertsma’s solution by adding a rigid layer beneath the compacting reservoir. Analytical formulae are presented for all the components of displacement of a point in the subsurface. Our derivation includes the correction of an error found in the paper written by Sharma in 1956.     

Addressing the role of working memory in mathematical word-problem solving when designing intervention for struggling learners

ZDM – Mathematics Education - The focus of this article is the well documented association between low working memory capacity and difficulty with mathematical word-problem solving. We begin...