Novel one-dimensional tubelike and two-dimensional polycatenated metal-organic frameworks

Two novel metal-organic frameworks (MOFs) [Zn(TITMB)(OAc)](OH).8.5H(2)O (1) and [Ag(TITMB)N(3)].H(2)O (2) [TITMB = 1,3,5-tris(imidazol-1-ylmethyl)-2,4,6-trimethylbenzene, OAc = acetate anion] were synthesized and their structures were determined by X-ray crystallography. Complex 1 crystallizes in tetragonal space group P(-)4 with a = 23.2664(7) and c = 11.9890(3) A and Z = 8. 1 has a one-dimensional tubelike structure with large inner pore size of approximately 17 A. Complex 2 crystallizes in monoclinic space group C2 with a = 20.7193(10), b = 11.5677(8), and c = 12.2944(6) A, beta = 125.5770(10) degrees, and Z = 4. 2 consists of two-dimensional honeycomb networks that interpenetrate each other to generate a polycatenated structure. In these two complexes, both zinc(II) and silver(I) atoms are four-coordinated with the same tetrahedral coordination geometry. The topologies of 1 and 2 are predominated by the conformations of TITMB, which are cis, trans, trans in 1 and cis, cis, cis in 2, respectively.     

Structure and mechanical properties of nylon 6.12 prepared by temperature slope crystallization. I. Crystallization of oriented spherulitic textures

Oriented spherulitic textures of a rod-shaped nylon 6.12 sample were crystallized by the temperature slope method. Crystallization conditions were compared by changing temperatures and growth rates. Three types of textures (negative spherulites, positive spherulites, and spherulitic aggregates) were observed by this method. The negative textures appeared when the growth rate was less than 0.1 mm/h. Crystalline orientation and mechanical properties of the textures were investigated by x-ray diffraction and micro-hardness measurements, respectively. The hydrogen-bonded (010) planes were perpendicular to the growth direction in the negative spherulite, while they were parallel to the growth direction in the positive spherulite. In the spherulitic aggregates, the b axis was parallel to the growth direction, while the (010) planes formed roughly an angle of 45° with the growth direction. Due to the orientation of the hydrogen-boned planes, the negative texture exhibited an anisotropy, with hardness values of 106 MPa and 137 Mpa when measured perpendicular or parallel to the growth direction, respectively.     

Effect of nitriding on grain oriented silicon steel bearing aluminum (the second study)

All kinds of high-permeability GO are manufactured using AlN as the main inhibitor. From a purely metallurgical viewpoint, three types of inhibitor preparation for high-permeability GO have been shown. They include a complete solution without nitriding, a complete precipitation with nitriding and a partial precipitation with nitriding. In this study, another possibility, i.e., a complete solution method with nitriding, was investigated to avoid the extra high-temperature slab reheating and to examine the effect of nitriding on GO bearing Al. This method can also provide the sharp Goss texture, and nitriding is shown to be very useful for changing the inhibitor intensity, depending on the primary grain size.     

High-Efficiency ZnCdSe/ZnSSe/ZnMgSSe Green Light-Emitting Diodes

Green light-emitting diodes (LEDs) were fabricated employing a ZnCdSe/ZnSSe triple quantum-well (TQW) active region surrounded by ZnMgSSe cladding layers grown on an n-type (100) GaAs substrate by molecular beam epitaxy (MBE). A 3.5 mW pure green emission was observed for the surface-emitting LED device at a peak wavelength of 513.3 nm (2.415 eV) with a spectral half-width of 11.7 nm (55 meV) under a 20 mA (4.6 V) direct current at room temperature (25°C). These correspond to an external quantum efficiency of 7.2%, a power conversion efficiency of 3.8%, a luminous current efficiency of 66 lm/A, and a luminous efficiency of 14 lm/W.     

Specific isolation of N-terminal fragments from proteins and their high-fidelity de novo sequencing

A new method to determine N-terminal amino acid sequences of multiple proteins at low pmol level by a parallel processing has been developed. The method contains the following five steps: (1) reduction, S-alkylation and guanidination for targeted proteins; (2) coupling with sulfosucccimidyl-2-(biotinamido)ethyl-1,3-dithiopropionate(sulfo-NHS-SS-biotin) to N(alpha)-amino groups of proteins; (3) digestion of the modified proteins by an appropriate protease; (4) specific isolation of N-terminal fragments of proteins by affinity capture using the biotin-avidin system; (5) de novo sequence analysis of peptides by MALDI-TOF-/MALDI-TOF-PSD mass spectrometry with effective utilization of the CAF (chemically assisted fragmentation) method.1 This method is also effective for N-terminal sequencing of each protein in a mixture of several proteins, and for sequencing components of a multiprotein complex. It is expected to become an essential proteomics tool for identifying proteins, especially when used in combination with a C-terminal sequencing method.     

The annealing behavior of hydrogen implanted into Al-1.5 at.% Si alloy

We have studied effects of added elements as well as defects on trap-sites of hydrogen in metals. For the purpose, we observed depth profiles and thermal behaviors of hydrogen implanted into Al-1.5 at.% Si alloy samples in an implantation-temperature range of liquid nitrogen temperature (LNT) to 373 K at different doses. The results were compared with those for pure aluminum samples. It was found that hydrogen is trapped as molecules in grain boundaries of Al/Si.     

Aerobic oxidation of alcohols using bismuth bromide as a catalyst

We developed an environmentally friendly method for aerobic oxidation of alcohols using a commercially available, relatively benign bismuth salt as a catalyst. We found that the catalytic combination of BiBr₃ with nitric acid is key for enhancing the reactivity. The reaction proceeds well under air, making the use of pure oxygen unnecessary. Each of the primary or secondary alcohols tested was oxidized to the corresponding aldehydes or ketones using this protocol.     

Syntheses, crystal structures and properties of novel zinc(II) complexes obtained by reactions of zinc(II) malonate with flexible multidentate ligands

Complex [Zn₂(bimb)₂(mal)₂(H₂O)₂]·4H₂O (1) (mal=⁻OCOCH₂COO⁻) was obtained by reaction of bidentate ligand 4,4′-bis(imidazole-1-ylmethyl)biphenyl (bimb) with zinc(II) salt of malonate, while the reaction of the same metal salt with 1,3,5-tris(imidazol-1-ylmethyl)-2,4,6-trimethylbenzene (titmb) gives another novel complex [Zn₂(titmb)₂(mal)][mal]·12H₂O (2). The structures of these complexes were determined by X-ray crystallography. The results revealed that 1 is a cyclic dinuclear complex in which the malonate groups act as terminators and prevent further aggregation, while 2 is a 2D honeycomb network in which each independent 2D sheet contains two sub-layers bridged by the malonate groups and complex 2 also contains free malonate as a counteranion connected to the 2D layer by C-H?O hydrogen bonds. The entirely different structure and topology of complexes 1 and 2, on the one hand, indicates that the nature of organic ligands affected the structures of assemblies greatly, and on the other, reveals the versatility of the malonate which can act as a bridging and/or blocking ligand.     

Preparation and photochromic properties of oligomeric poly(dimethylsiloxane) with the spiropyran or spirooxazine moiety in the side chain

Spirobenzopyran 1 , with the 3-(diethoxymethylsilyl)-propyl group at the N atom, was synthesized. The condensation reaction of the spiropyran 1 and diethoxydimethylsilane gave oligomeric poly(dimethylsiloxane) with the spiropyran moiety in the side chain. The oligomer was photochromic; its colour changed from colorless to purple-red on uv irradiation and the color faded on visible irradiation or on standing in the dark. The half-decay time of the thermal decoloration was about twice that of monomeric spiropyran dissolved in the dimethylsiloxane oligomer. Photochromic poly(dimethylsiloxane) with the spirooxazine moiety in the side chain was also prepared.     

Effects of the intramolecular NH...S hydrogen bond in mononuclear platinum(II) and palladium(II) complexes with 2,2'-bipyridine and benzenethiol derivatives

A series of complexes, [M(bpy)(SAr)2] (M = platinum(II) or palladium(II), bpy = 2,2'-bipyridine, SAr = 2- or 4-(acylamino)benzenethiolate, or 2-(alkylcarbamoyl)benzenethiolate), were synthesized and characterized on the basis of 1H NMR, IR, and electrochemical properties. The structures of [Pt(bpy)(S-2-Ph3CCONHC6H4)2] (1) and [Pt(bpy)(S-2-t-BuNHCOC6H4)2] (3) were determined by X-ray analysis. The complexes have intramolecular NH...S hydrogen bonds between the amide NH group and the sulfur atom. A weak NH...S hydrogen bond in these complexes and [Pd(bpy)(S-2-Ph3CCONHC6H4)2] (4) is detected from the 1H NMR spectra and the IR spectra in chloroform and in the solid state. [Pt(bpy)(S-2-Ph3CCONHC6H4)2] (1) exhibits a remarkably high-energy-shifted lowest-energy band in UV-visible spectra and has a positively shifted oxidation potential. The blue-shift of 42 nm and the positive shift of +0.24 V, as compared to those of [Pt(bpy)(SC6H5)2), are due to the effect of the NH...S hydrogen bond.