Whirling frequencies and amplitudes due to deviations of generator shape

Earlier measurements in large synchronous generators indicate the existence of backward whirling motion, and also relatively large deviations of shape in both the rotor and the stator. These non-symmetric geometries produce an attraction force between the rotor and the stator, called unbalanced magnetic pull (UMP). The target of this paper is to analyse the whirling frequencies and amplitude of the response for large synchronous generators with a high number of poles, due to deviations of shape in the rotor and stator. A mathematical model is developed to describe the shapes of the rotor and stator, and the corresponding UMP is obtained by using the law of energy conservation. The UMP is analysed due to different deviations of shape. The result gives the average angular frequency and the magnitude of the UMP for certain deviations of shape. From this result, the whirling frequency and the amplitude of the corresponding response can be approximated. Simulations of the response of a Jeffcott rotor model show good agreement with the theoretical results of the UMP for some generator geometries. The conclusion is that different whirling frequencies, both backward and forward whirling, can occur in these machines due to deviations in shape of the generator. Therefore, the shape of the generator can excite resonance vibrations on several other frequencies than the rotation frequency. During maintenance of hydropower generators the shapes of the rotor and stator are frequently measured. The results from this paper can be used to evaluate such measurements and to explain the existence of complicated whirling motion.     

Rapid determination of ethylene glycol at toxic levels in serum and urine

The rapid gas chromatographic detection and determination of ethylene glycol in biological fluids is described. Phenylboronic acid in acetone was used for the esterification of glycol. The phenylboronates of ethylene glycol and 1,2-propylene glycol are not separated on a packed column of medium polarity (OV-17), but they can be separated on a non-polar column (OV-101). In both instances, 1,3-propylene glycol can be used as an internal standard. The method requires only 100 microliters of serum or urine and is suitable for trace analysis in an emergency toxicological laboratory. The utility of the method is demonstrated on two cases of human intoxication with ethylene glycol.     

Atomistic molecular dynamics simulations of chemical force microscopy

Chemical force microscopy and related force measurement techniques have emerged as powerful tools for studying fundamental interactions central to understanding adhesion and tribology at the molecular scale. However, detailed interpretation of these interactions requires knowledge of chemical and physical processes occurring in the region of the tip-sample junction that experiments cannot provide, such as atomic-scale motions and distribution of forces. In an effort to address some of these open issues, atomistic molecular dynamics simulations were performed modeling a chemical force microscope stylus covered with a planar C12 alkylthiolate self-assembled monolayer (SAM) interacting with a solid wall. A complete loading-unloading sequence was simulated under conditions of near-constant equilibrium, approximating the case of infinitely slow tip motion. In the absence of the solid wall, the stylus film existed in a fluid state with structural and dynamic properties similar to those of the analogous planar SAM at an elevated temperature. When the wall was brought into contact with the stylus and pressed against it, a series of reversible changes occurred culminating with solidification of the SAM film at the largest compressive force. During loading, the chemical composition of the contact changed, as much of the film's interior was exposed to the wall. At all tip heights, the distribution of forces within the contact zone was uneven and subject to large local fluctuations. Analysis using the Johnson-Kendall-Roberts, Derjaguin-Muller-Toporov, and Hertz contacts mechanics models revealed significant deviations from the simulation results, with the JKR model providing best overall agreement. Some of the discrepancies found would be overlooked in an actual experiment, where, unlike the simulations, contact area is not separately known, possibly producing a misleading or incorrect interpretation of experimental results. These shortcomings may be improved upon by using a model that correctly accounts for the finite thickness of the compliant components and nonlinear elastic effects.     

Triple resonance investigation of F centres in BaFCl

Abstract

In BaFCl two types of F centres can be produced, where the electron occupies a Cl^? vacancy [F(Cl^?)-centres] or an F^? vacancy [F(F^?)-centres]. When producing F(F^?)-centres the simultaneous production of F(Cl^?)-centres cannot be avoided. Both ESR spectra overlap strongly. The ENDOR spectra contain very many lines of both centres and have a very complicated angular dependence. It is shown that the angular dependence of the ENDOR spectra of both F centres can be measured separately by applying a double ENDOR technique (called also Triple Resonance). The ratio of the signal heights of the ENDOR lines compared to the double ENDOR lines is characteristic for the neighbour shell to which the nuclei involved belong. The use of this effect for the analysis of the spectra and its explanation are discussed.     

Measurement of the electric form factor of the neutron at Q2 = 0.3-0.8 (GeV/ c) 2 ⋆

The electric form factor of the neutron, G_E,n, has been measured at the Mainz Microtron by recoil polarimetry in the quasielastic D(¯e, e¯n)p reaction. Three data points have been extracted at squared four-momentum transfers Q ² = 0.3, 0.6 and 0.8 (GeV/c)². Corrections for nuclear binding effects have been applied.This revised version was published online in March 2005. In the previous version, the email address of one author was inadvertently assigned to multiple authors.     

Accurate masses of unstable rare-earth isotopes by ISOLTRAP

Direct mass measurements of neutron-deficient rare-earth isotopes in the vicinity of ¹⁴⁶Gd were performed with the Penning trap mass spectrometer ISOLTRAP at ISOLDE/CERN. This paper reports on the measurement of more than 40 isotopes of the elements praseodymium, neodymium, promethium, samarium, europium, dysprosium and holmium, that have been measured with a typical accuracy of m 14 keV. An atomic mass evaluation has been performed taking into account other experimental mass values via a least-squares adjustment. The results of the adjustment are discussed. Received: 18 April 2000 / Accepted: 12 July 2000     

Laser systems specialized for laser spectroscopy at storage rings

Laser spectroscopy at storage rings often suffers from a limited resolution due to Doppler-broadened resonances. Broadening is caused by the velocity spread of the ions stored in the beam. In the following, the present status of our work on laser systems specialized on the specific needs of laser spectroscopy at storage rings is reported. Two pulsed laser systems were developed. One is a dye laser whose spectral bandwidth can be switched by inserting different Littrow-prisms into the resonator. An increase in bandwidth up to a factor of 45 was achieved. This laser was used for fast qualitative scans and high resolution measurements. The other laser system is a Nd : YAG laser pumped optical parametric oscillator. It is a tunable laser system covering the spectral range from 410 to 4000 nm. Furthermore, a continuous wave laser with a frequency shifted feedback cavity is described. It shows broadband emission with an adjustable bandwidth of up to 4.5 GHz. This laser can be advantageous for laser cooling of ion beams. This revised version was published online in August 2006 with corrections to the Cover Date.     

Higher-loop integrability in gauge theory

The dilatation operator measures scaling dimensions of local operator in a conformal field theory. Algebraic methods of constructing the dilatation operator in four-dimensional N=4 gauge theory are reviewed. These led to the discovery of novel integrable spin chain models in the planar limit. Making use of Bethe ansätze a superficial discrepancy in the AdS/CFT correspondence was found, we discuss this issue and give a possible resolution. To cite this article: N. Beisert, C. R. Physique 5 (2004).

Résumé

L'opérateur de dilatation mesure les dimensions d'échelles des opérateurs locaux des théories conformes des champs. Nous passons en revue les méthodes algébriques de construction de l'opérateur de dilatation pour la théorie de jauge N=4 en quatre dimensions. Ceci nous a conduit à découvrir, dans la limite planaire, de nouveaux modèles intégrables de chaînes de spin. En utilisant l'ansätze de Bethe une incompatibilité avec la correspondance AdS/CFT fut découverte, nous discutons ce problème et une résolution possible. Pour citer cet article : N. Beisert, C. R. Physique 5 (2004).