Magnetic resonance imaging and pulsed Doppler sonography of poststenotic jets: Correlation between signal void and flow velocity distribution

To correlate the appearance of poststenotic jets on gradient echo images with features of localized Doppler spectra of the jets, we studied an in vitro model of steady flow-through stenoses of 86, 96, and 99% area reduction. As fluids, water and a 40% glycerol solution in water were used. MRI was performed with a 1.5 T whole body imager and gradient echo images were obtained in planes parallel to the direction of flow. Doppler spectra were acquired separately from the MR measurements at 1 cm intervals for a distance of 10 cm downstream from the stenosis. Poststenotic signal void was observed for water and for the 40% glycerol solution only if the mean velocity within the stenosis exceeded a limit of 50–60 cm/sec. On the MR images, the jets could be divided into two segments: A proximal jet segment of uniform width equal to the diameter of the stenosis, followed by a distal jet segment which was characterized by broadening and then dissipating signal void. Except for the 99% stenosis, a high signal intensity core was present within the proximal jet segment. In the proximal jet segment, the Doppler measurements showed a low temporal fluctuation of the maximal flow velocity and only little flow opposite to the main flow direction. In the distal jet segment, the velocity fluctuation and the intensity of reverse flow increased sharply. The high signal intensity core of the jet was associated with a poststenotic zone of constant maximal flow velocity. The results demonstrate a close relationship between characteristic features of poststenotic jets in MRI and pulsed Doppler sonography.     

Complex polymer architectures through dimethoxymethyl 1,1‐diphenylethylene derivatives

The reactions of polystyryllithium and potassium on dimethoxymethyl 1,1‐diphenylethylene derivatives were studied in different solvents. In a polar medium, A₃ and A₆ star types were formed according to the stoichiometry, whereas in a nonpolar medium, hyperbranched structures were synthesized. Extensions of an already proposed mechanism in polar and nonpolar media were examined. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 3329–3335, 2003     

Block copolymers of acrylic acid and butyl acrylate prepared by reversible addition–fragmentation chain transfer polymerization: Synthesis,characterization, and use in emulsion polymerization

Amphiphilic block copolymers of poly(acrylic acid‐b‐butyl acrylate) were prepared by reversible addition–fragmentation chain transfer polymerization in a one‐pot reaction. These copolymers were characterized by NMR, static and dynamic light scattering, tensiometry, and size exclusion chromatography. The aggregation characteristics of the copolymers corresponded to those theoretically predicted for a star micelle. In a butyl acrylate and methyl methacrylate emulsion polymerization, low amounts of these copolymers could stabilize latices with solid contents up to 50%. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 684–698, 2003     

Polymer-supported approach for solution-phase synthesis of cysteine trap protease inhibitors: procedure for straightforward optimization of the P1-P1' pocket

Peptide-based reversible and irreversible cysteine proteases inhibitors are well reported in the literature. Many of these compounds have an electrophilic carbonyl group as a cysteine trap in the place of a scissile amide moiety of the natural substrate. As a common mechanism strategy, we have designed a probe library of a cysteine trap for rapid optimization of P1-P1' pockets of different cysteine proteases. The synthesis of this library using a straightforward methodology based on polymer-supported reagents and scavengers to avoid tedious purification steps has been achieved. For the selective monobromination of diazo ketones, preparation of a new supported reagent, piperidinoaminomethylpolystyrene hydrobromide, is also described.     

Zirconocene-mediated route to enantiopure 9-oxabicyclononanes functionalized on both carbon bridges

[reaction: see text] A zirconocene-mediated ring contraction of 4-vinylfuranosides generated either from d-arabinose or d-glucose is followed by sequential oxidation to the ketone and alkynyl Grignard addition. The resulting cis-cyclobutanediols are subjected in turn to thermal rearrangement and intramolecular oxymercuration-demercuration. The regiochemistry of the final ring closure is controlled by the nature of R.     

Photoinduced electron transfer at liquid|liquid interfaces. Part VII. Correlation between self-organisation and structure of water-soluble photoactive species

The self-organisation of a variety of dyes at the water|1,2-dichloroethane interface was studied by admittance measurements, photocurrent–potential curves and light polarisation anisotropy of the photocurrent. The heterogeneous photo-oxidation of ferrocene was studied at interfaces sensitised by Sn(IV) meso-tetra-(4-carboxyphenyl) porphyrin dichloride (SnTPPC), chlorin e-6, protoporphyrin IX (protoIX) and Fe(III) protoporphyrin IX chloride (Fe-protoIX). Cyclic voltammograms and capacitance voltage curves exhibit different features associated with the self-assembly of the dye species at the liquid|liquid boundary. In the case of SnTPPC, the capacitance curves displayed the characteristic responses commonly associated with the specific adsorption of ionic species. On the other hand, chlorin e-6, protoIX and Fe-protoIX show rather complex behaviour suggesting not only changes in the excess charge but also in the dielectric permittivity of the interface. Differences in the photocurrent efficiency were also observed under the same experimental conditions. The relative magnitude of the photocurrent responses were rationalised in terms of the phenomenological electron transfer rate constant, the photon capture cross-sections and the lifetime of the triplet state as obtained from nanosecond flash photolysis. Finally, the average molecular orientation of the adsorbed photoactive species was estimated from the photocurrent dependence on the angle of light polarisation in total internal reflection. The results show a clear correlation between the orientation of the transition dipole and the distribution of the peripheral carboxyl groups responsible for the hydrophilic nature of the dyes.     

Structure activity relationship by NMR and by computer: a comparative study

There has recently been considerable interest in using NMR spectroscopy to identify ligand binding sites of macromolecules. In particular, a modular approach has been put forward by Fesik et al. (Shuker, S. B.; Hajduk, P. J.; Meadows, R. P.; Fesik, S. W. Science 1996, 274, 1531-1534) in which small ligands that bind to a particular target are identified in a first round of screening and subsequently linked together to form ligands of higher affinity. Similar strategies have also been proposed for in silico drug design, where the binding sites of small chemical groups are identified, and complete ligands are subsequently assembled from different groups that have favorable interactions with the macromolecular target. In this paper, we compare experimental and computational results on a selected target (FKBP12). The binding sites of three small ligands ((2S)1-acetylprolinemethylester, 1-formylpiperidine, 1-piperidinecarboxamide) in FKBP12 were identified independently by NMR and by computational methods. The subsequent comparison of the experimental and computational data showed that the computational method identified and ranked favorably ligand positions that satisfy the experimental NOE constraints.     

Sensitive determination of josamycin and rokitamycin in plasma by high-performance liquid chromatography with fluorescence detection.

Rokitamycin and josamycin were successfully derivatized with dansylhydrazine in 20 min at 60 degrees C. Rokitamycin and josamycin levels were determined in plasma after ion-pair extraction into hexane-isoamyl alcohol with lauryl sulphate and precolumn derivatization. Resolution was obtained by liquid chromatography with fluorescence detection (352/537 nm) in 12 min. The limit of detection was 20 ng/ml macrolide starting from 1 ml of plasma, and linearity was demonstrated between 50 and 400 ng/ml. Inter-run coefficients of variation were 10.2% at 100 ng/ml and 9.1% at 300 ng/ml. The system was reliably used for pharmacokinetic studies in plasma.     

Reactivity of monolayer-protected gold nanoclusters at dye-sensitized liquid/liquid interfaces

Hexanethiolate monolayer-protected gold nanoclusters (MPCs) were used as redox quenchers at the polarizable water/1,2-dichloroethane (DCE) interface. Photocurrent responses originating from the heterogeneous quenching of photoexcited water soluble porphyrin complexes by MPCs dissolved in the DCE phase were observed. As MPCs can function as both electron acceptors and donors, the photocurrent results from the superposition of two simultaneous processes, which correspond to the oxidation and reduction of MPCs. The magnitude of the net photocurrent is essentially determined by the balance of the kinetics of these two processes, which can be controlled by tuning the Galvani potential difference between the two phases. We show that, within the available potential window, the apparent electron-transfer rate constants follow classical Butler-Volmer dependence on the applied potential difference.     

Periodic Mesoporous Organosilica Nanoparticles for CO2 Adsorption at Standard Temperature and Pressure

(1) Background: Due to human activities, greenhouse gas (GHG) concentrations in the atmosphere are constantly rising, causing the greenhouse effect. Among GHGs, carbon dioxide (CO₂) is responsible for about two-thirds of the total energy imbalance which is the origin of the increase in the Earth’s temperature. (2) Methods: In this field, we describe the development of periodic mesoporous organosilica nanoparticles (PMO NPs) used to capture and store CO₂ present in the atmosphere. Several types of PMO NP (bis(triethoxysilyl)ethane (BTEE) as matrix, co-condensed with trialkoxysilylated aminopyridine (py) and trialkoxysilylated bipyridine (Etbipy and iPrbipy)) were synthesized by means of the sol-gel procedure, then characterized with different techniques (DLS, TEM, FTIR, BET). A systematic evaluation of CO₂ adsorption was carried out at 298 K and 273 K, at low pressure. (3) Results: The best values of CO₂ adsorption were obtained with 6% bipyridine: 1.045 mmol·g⁻¹ at 298 K and 2.26 mmol·g⁻¹ at 273 K. (4) Conclusions: The synthetized BTEE/aminopyridine or bipyridine PMO NPs showed significant results and could be promising for carbon capture and storage (CCS) application.