On a Question of Phillips

In [5] Phillips proved that one can obtain the additive group of any nonstandard model *? of the ring ? of integers by using a linear mod 1 function h : F ?, where F is the α-dimensional vector space over ? when α is the cardinality of *?. In this connection it arises the question whether there are linear mod 1 functions which are neither addition nor quasi-linear. We prove that this is the case.     

Photoinitiated curing of mono‐ and bifunctional epoxides by combination of active chain end and activated monomer cationic polymerization methods

Photoinitiated cationic polymerization of mono‐ and bifunctional epoxy monomers, namely cyclohexeneoxide (CHO), 4‐epoxycyclohexylmethyl‐3′,4′‐epoxycyclohexanecarboxylate (EEC), respectively by using sulphonium salts in the presence of hydroxylbutyl vinyl ether (HBVE) was studied. The real‐time FTIR spectroscopic, gel content determination, and thermal characterization studies revealed that both hydroxyl and vinyl ether functionalities of HBVE take part in the polymerization. During the polymerization, HBVE has the ability to react via both active chain end (ACE) and activated monomer mechanisms through its hydroxyl and vinyl ether functionalities, respectively. Thus, more efficient curing was observed with the addition of HBVE into EEC‐containing formulations. It was also demonstrated that HBVE is effective in facilitating the photoinduced crosslinking of monofunctional epoxy monomer, CHO in the absence of a conventional crosslinker. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 4914–4920, 2007     

Crystal and molecular structures of 1-[3-(3,4-dimethoxyphenyl)-2-propenoyl]pyrrolidine.

The crystal structure of 1-[3-(3,4-dimethoxyphenyl)-2-propenoyl]pyrrolidine (C15H19NO3) (I) has been determined by X-ray analysis. It crystallizes orthorhombic space group Pbca with a = 24.295(3), b = 15.086(3), c = 7.552(3)A, V = 2768(1)A3, Z = 8, Dcalc = 1.254 g/cm3, mu = (Mo K(alpha)) = 0.87 cm(-1). The title compound has analgesic activity of cycloaliphatic amine part. The molecule is deviated from planar configuration.     

Crystallographic report: Bis{µ‐[O‐cyclopentyl(4‐methoxyphenyl)dithiophosphonato]1κ:S,2κ:S‐[O‐cyclopentyl(4‐methoxyphenyl)dithiophosphonato]‐1κ2S,S′}dicadmium(II)

The centrosymmetric title compound, [Cd₂{CH₃OC₆H₄P(OC₅H₉)S₂}₄], features an eight‐membered [? Cd? S? P? S? ]₂ ring owing to the presence of bridging dithiolate ligands. Tetrahedral coordination geometries for cadmium are completed by chelating ligands. Copyright © 2004 John Wiley & Sons, Ltd.     

Variational approximations for renormalization group transformations

Approximate recursion relations which give upper and lower bounds on the free energy are described. Optimal calculations of the free energy can then be obtained by treating parameters within the renormalization equations variationally. As an example, a particularly simple lower bound approximation which preserves the symmetry of the Hamiltonian (the one-hypercube approximation) is described. The approximation is applied to both the Ising model and the Wilson-Fisher model. At the fixed point a parameter is set variationally and critical indices are calculated. For the Ising model the agreement with the exact results atd = 2 is surprisingly good, 0.1%, and is good atd=3 and evend=4. For the Wilson-Fisher model the recursion relation is reduced to a one-dimensional integral equation which can be solved numerically givingv=0.652 atd=3, or by expansion in agreement with the results of Wilson and Fisher to leading order in . The method is also used to calculate thermodynamic functions for thed = 2 Ising model; excellent agreement with the Onsager solution is found.Supported in part by the National Science Foundation under Grants Nos. MPS73-04886A01 and GH-41512 and by the Brown University Materials Research Laboratory supported by the National Science Foundation. M.C.Y. was supported by a grant from the Scientific and Technical Research Council of Turkey.     

A New Entropy Function to Analyze Isentropic Processes of Ideal Gases with Variable Specific Heats

A new entropy function s⁺ is defined in terms of the existing entropy function s° and temperature as s⁺ = s° − R lnT to facilitate the analysis of isentropic processes of ideal gases with variable specific heats. The function s⁺ also makes it possible to calculate the entropy changes of ideal gases during processes when volume information is available instead of pressure information and the variation of specific heats with temperature is to be accounted for. The introduction of the function s⁺ eliminates the need to use the dimensionless isentropic functions relative pressure P_r and relative specific volume v_r of ideal gases and to tabulate their values. The P_r and v_r data are often confused with pressure and specific volume, with an adverse effect on the study of the second law of thermodynamics. The new s⁺ function nicely complements the existing s° function in entropy change calculations: the former is conveniently used when volume information is given while the latter is used when pressure information is available. Therefore, the introduction of the new entropy function s⁺ is expected to make a significant contribution to the thermodynamics education and research by streamlining entropy analysis of ideal gases.     

Cryogenic radiometer based absolute spectral power responsivity calibration of integrating sphere radiometer to be used in power measurements at optical fiber communication wavelengths

This paper covers the absolute spectral power responsivity calibration of spectralon-coated Integrating Sphere Radiometer (ISR) equipped with 3 mm diameter InGaAs photodiode to be used as a transfer standard in fiber optic power measurements against Electrical Substitution Cryogenic Radiometer (ESCR) in Optics Laboratory of National Metrology Institute (TUBITAK UME) of Turkey. The initial uncertainty arising from the use of the Electrically Calibrated Pyroelectric Radiometer (ECPR) as a transfer standard in radiometric scale is 0.5% (k=2), which particularly comes from irregularity in the surface homogeneity of ECPR. In order to eliminate the ECPR step as well as its initial uncertainty contribution in fiber optic power measurements, the calibration application herein was carried out. Moreover power stabilization measurements of DFB laser sources at both 1309.1 nm and 1549.0 nm, the beam size determinations, and spectral analyses of these laser sources as well as spatial and angular dependence of spectral responsivities of the ISR were presented in this paper. The total expanded uncertainties were calculated as 0.283% and 0.315% in the determination of absolute spectral power responsivities of the ISR for 1309.1 nm and 1549.0 nm wavelengths respectively (k=2).     

Investigation of 2-aminoethanethiol as corrosion inhibitor for steel using response surface methodology (RSM)

The inhibition efficiency of 2-aminoethanethiol (2-AEE) has been investigated against steel corrosion in 0.1 M HCl solution. The effect of temperature, pH, and concentration were studied with the help of potentiodynamic measurement, electrochemical impedance spectroscopy, scanning electron microscopy, and atomic absorption spectroscopy techniques. The potential of zero charge (E_pzc) studies showed that the adsorption occurs via ?SH group; the metal surface is positively charged in corrosive test solution. The adsorptive interaction is evaluated, and best correlation was obtained with Langmuir isotherm. 2-AEE was shown to have significant inhibition efficiency against steel corrosion. The response surface methodology was employed to explain the relation between pH, inhibitor concentration, and the efficiency. The regression analysis was realized for development of an equation between independent variables and the output. The success of fitting model was tested with basic statistical arguments, residual and variance analysis, T and F tests, and R ² value. The statistical evaluations showed that the obtained polynomial equation can be successfully used for optimization of applications involving the use of 2-AEE as inhibitor.     

Experimental vibrational spectra (Raman,infrared) and DFT calculations on monomeric and dimeric structures of 2‐ and 6‐bromonicotinic acid

In this work, the Fourier transform infrared and Raman spectra of 2‐bromonicotinic acid and 6‐bromonicotinic acid (abbreviated as 2‐BrNA and 6‐BrNA, C₆H₄BrNO₂) have been recorded in the region 4000–400 and 3500–50 cm⁻¹. The optimum molecular geometry, normal mode wavenumbers, infrared intensities and Raman scattering activities, corresponding vibrational assignments and intermolecular hydrogen bonds were investigated with the help of B3LYP density functional theory (DFT) method using 6‐311++G(d,p) basis set. Reliable vibrational assignments were made on the basis of total energy distribution (TED) calculated with scaled quantum mechanical (SQM) method. From the calculations, the molecules are predicted to exist predominantly as the C1 conformer. Copyright © 2009 John Wiley & Sons, Ltd.