Validation of a method for predicting the precision, limit of detection and range of quantitation in competitive ELISA.

The mathematical model for predicting the precision, limit of detection (LOD) and range of quantitation (ROQ) in a competitive enzyme-linked immunosorbent assay (ELISA) proposed by Hayashi et al. (Anal. Chem., 2004, 76, 1295) was validated. The model describes the relative standard deviation (RSD) of concentration estimates by the RSDs of pipetting volumes of analyte, enzyme-conjugated antigen, antibody and substrate solutions, and the standard deviation (SD) of inherent absorbances between the wells in an ELISA plate. For 6 kinds of direct competitive ELISA kits, the LOD and ROQ predicted by the model agreed well with those obtained by experiments with real samples. It was also confirmed that the model is applicable to the prediction of uncertainty that depends on the pipetting error of the viscous antiserum solution. The model was demonstrated to be useful for estimating the LOD and ROQ of competitive ELISA.     

Dielectric behavior of polyethyleneoxide (polyox)

Ohne Zusammenfassung     

Efficient decoherence-free entanglement distribution over lossy quantum channels

We propose and demonstrate a scheme for boosting the efficiency of entanglement distribution based on a decoherence-free subspace over lossy quantum channels. By using backward propagation of a coherent light, our scheme achieves an entanglement-sharing rate that is proportional to the transmittance T of the quantum channel in spite of encoding qubits in multipartite systems for the decoherence-free subspace. We experimentally show that highly entangled states, which can violate the Clauser-Horne-Shimony-Holt inequality, are distributed at a rate proportional to T.     

Sonochemically synthesized core-shell structured Au–Pd nanoparticles supported on γ-Fe2O3 particles

A sample of Au–Pd bimetallic nanoparticles supported on γ-Fe₂O₃ was synthesized in a sonochemically one-pot process. The structural analyses of the synthesized sample were performed by the techniques of X-ray Absorption Fine Structure (XAFS), X-ray Diffraction (XRD), Transmission Electron Microscopy (TEM) and UV–vis spectrometry. Results indicated that the synthesized sample formed a core-shell structure in which a gold core was surrounded by a thin palladium shell. The reaction rate constant for the hydrogenation of cyclohexene of the present sample showed higher value than that of Pd nanoparticles supported on γ-Fe₂O₃ and core-shell structured Au–Pd nanoparticles supported on SiO₂. The present sample is a promising catalyst material which has a high catalytic activity.     

Numerical simulations of the ignition of n-heptane droplets in the transition diameter range from heterogeneous to homogeneous ignition

Spontaneous ignition of single n-heptane droplets in a constant volume filled with air is numerically simulated with the spherical symmetry. The volume is closed against mass, species, and energy transfer. The numerical model is fully transient. It continues calculation even after the droplet has completely vaporized, and therefore can predict pre-vaporized ignition. Initial pressure and initial air temperature are fixed at 3 MPa and 773 K, respectively. The droplet is initially at room temperature, and its diameter is between 1 and 100 μm. When the overall equivalence ratio is fixed to be sufficiently large, there exists no ignition limit in terms of initial droplet diameter d₀, and the ignition delay takes a minimum value at certain d₀. In such a case, transition from the heterogeneous ignition to the homogeneous ignition with decreasing d₀ is observed. When d₀ is fixed to be so small that the ignition would not occur in an infinite volume of air, the ignition delay takes a minimum value at certain , which is less than unity. Two-stage ignition behavior is investigated with this model. Ignition delay of a cool flame has the dependence on d₀ that is similar to that of ignition delay of a hot flame when is unity. When is almost zero, the ignition limit for cool flame in terms of d₀ is not identified unlike that for hot flame.     

Scanning ion conductance microscopy for imaging biological samples in liquid: a comparative study with atomic force microscopy and scanning electron microscopy

The present study was designed to show the applicability of scanning ion conductance microscopy (SICM) for imaging different types of biological samples. For this purpose, we first applied SICM to image collagen fibrils and showed the usefulness of the approach-retract scanning (ARS)/hopping mode for such samples with steep slopes. Comparison of SICM images with those obtained by AFM revealed that the ARS/hopping SICM mode can probe the surface topography of collagen fibrils and chromosomes at nanoscale resolution under liquid conditions. In addition, we successfully imaged cultured HeLa cells, with 15 μm in height by ARS/hopping SICM mode. Because SICM can obtain non-contact (or force-free) images, delicate cellular projections were visualized on the surface of the fixed cell. SICM imaging of live HeLa cells further demonstrated its applicability to study the morphological dynamics associated with biological processes on the time scale of minutes under liquid conditions. We further applied SICM for imaging the luminal surface of the trachea and succeeded in visualizing the surface of both ciliated and non-ciliated cells. These SICM images were comparable with those obtained by scanning electron microscopy. Although the dynamic mode of AFM provides better resolution than the ARS/hopping mode of SICM in some samples, only the latter can obtain contact-free images of samples with steep slopes, rendering it an important tool for observing live cells as well as unfixed or fixed soft samples with complicated shapes. Taken together, we demonstrate that SICM imaging, especially using an ARS/hopping mode, is a useful technique with unique capabilities for imaging the three-dimensional topography of a range of biological samples under physiologically relevant aqueous conditions.     

On a p-Local Geometry Associated with a Complex of Non-Trivial p-Subgroups

Let D be a complex of non-trivial p-subgroups of a finite groupG, closed under G-conjugation. In this paper, a p-local geometry^p(G; D) is introduced for G associated with the complex D. Thehomotopy equivalence between ^p(G; D) and D is also studied.2000 Mathematics Subject Classification 20E15, 51E24.