Surface plasmon-polaritons and their uses

Surface plasmon-polaritons have been experimentally and theoretically studied for many years but in recent years interest has grown substantially due to their possible use in novel device applications. The aim of this review is to introduce the concept of surface plasmon-polaritons so that the reader will be able to appreciate the physics they can probe, and the device applications in which they may be utilized.     

Molecular weight dependence of diblock copolymer segregation at a polymer/polymer interface

Utilizing forward recoil spectrometry (FRES), we have determined the segregation isotherm which describes the interfacial excess z_i^* of diblock copolymers of poly (d₈-styrene-b-2-vinylpyridine) (dPS-PVP) at the interface between the homopolymers PS and PVP as a function of ?_∞, the volume fraction of diblock copolymer remaining in the host homopolymer. All the samples were analyzed after annealing at temperatures and times sufficient to achieve equilibrium segregation. The effect of the degree of polymerization of both the diblock copolymers and the host homopolymers on the segregation isotherm is investigated. When the degree of polymerization of the homopolymer is much larger than that of the diblock copolymer, the normalized interfacial excess (z_i^*/R_g), where R_g is the radius of gyration of an isolated block copolymer chain, is a universal function of that portion of the block copolymer chemical potential due to chain stretching. The existence of such a universal function is predicted by theory and its form is in good agreement with self-consistent mean field calculations. Using these results, one can predict important aspects of the block copolymer segregation (e.g., the saturation interfacial excess) without recourse to the time-consuming numerical calculations. © 1994 John Wiley & Sons, Inc.     

Domain size equilibration in sphere‐forming block copolymers

The kinetics of domain size equilibration were studied for asymmetric poly(ethylene‐alt‐propylene)‐b‐poly(dimethyl siloxane) (EPDMS) and polyisoprene‐b‐poly(dimethyl siloxane) (IDMS) block copolymers in the body‐centered cubic ordered phase. Small‐angle X‐ray scattering measurements of the principal peak position (q*) were made as a function of time after temperature jumps within the ordered state. The equilibration times were remarkably long, especially on cooling and for temperatures below 100 °C. For example, after a quench to 40 °C, q* for EPDMS had not fully equilibrated even after several weeks of annealing; IDMS required several days to equilibrate at the same temperature. In contrast, a lamella‐forming EPDMS sample was able to adjust q* within the timescale of the measurements (i.e., minutes) with both heating and cooling over the same temperature range. Measurements of tracer diffusion indicated that chain mobility was not the rate‐limiting step, although differences in mobility did account for the differences between EPDMS and IDMS. Rather, the limiting step was the required reduction in the number density of spheres on cooling; the disappearance of spheres, either by evaporation or by fusion, provided a large kinetic barrier. Lamellae, however, could adjust domain dimensions simply by local displacements of individual chains. © 2003 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 41: 715–724, 2003     

Simultaneous separation and determination (in serum) of phenytoin and carbamazepine and their deuterated analogues by high-performance liquid chromatography--ultraviolet detection for tracer studies

The use of stable isotope-labeled tracer compounds is the safest and most effective method to perform many steady state pharmacokinetic and drug interaction studies. We describe a method by which the heavily deuterated 2H10 analogues of carbamazepine (2H10 CBZ) and phenytoin (2H10 PHT) can be chromatographically separated by high-performance liquid chromatography from unlabeled CBZ and PHT. All compounds are quantitated against an internal standard (IS) (10,11-dihydrocarbamazepine) and measured using conventional UV detection rather than mass spectrometry. Baseline resolution of extracted serum containing 2H10 CBZ, CBZ, 2H10 PHT, PHT and IS is achieved on a heated (55 degrees C) 25 cm x 4.6 mm BioAnalytical Systems Phase II 5 microns ODS column with an isocratic mobile phase consisting of water-acetonitrile-tetrahydrofuran (80:16:4, v/v/v) at 1.2 ml/min. Eluting compounds were monitored at a UV wavelength of 214 nm. Calculated resolution of 2H10 CBZ from CBZ and of 2H10 PHT from PHT were 1.3. Serum standard curves were linear (R greater than or equal to 0.999) over a range of 0.5-14 micrograms/ml for 2H10 CBZ, 0.5-20 micrograms/ml for CBZ, 0.5-20 micrograms/ml for 2H10 PHT, and 0.5-30 micrograms/ml for PHT. Within-day percent relative standard deviations (precision) were less than 6% in all cases.     

Simultaneous determination of p-hydroxylated and dihydrodiol metabolites of phenytoin in urine by high-performance liquid chromatography

Accurate urinary measurements of the two major metabolites of phenytoin, 5-(p-hydroxyphenyl)-5-phenylhydantoin (p-HPPH) and 5-(3,4-dihydroxy-cyclohexa-1,5-dienyl)-5-phenylhydantoin (dihydrodiol, DHD), are necessary for pharmacokinetic and drug-interaction studies of this commonly used antiepileptic drug. We describe a simple, rapid, acid hydrolysis, with liquid-liquid extraction and simultaneous isocratic reversed-phase high-performance liquid chromatography of p-HPPH and 5-(m-hydroxyphenyl)-5-phenylhydantoin (m-HPPH) (hydrolytic end product of DHD). p-HPPH and m-HPPH were quantitated against their separate respective internal standards of alphenal and tolylbarb. The mobile phase consisted of water-dioxane-tetrahydrofuran (80:15:5, v/v/v) at 2 ml/min and at 50 degrees C, with detection at 225 nm. Baseline separation was achieved by use of a 16 cm x 3.9 mm Nova-Pak C18 column and total analysis time of 12 min. p-HPPH and m-HPPH concentrations ranged from 10 to 200 and from 2 to 30 micrograms/ml, respectively, with between-day coefficients of variations of 3.3-4.5% and 2.2-5.1% for controls. All standard curves were linear with r values greater than 0.993. The DHD concentration was determined by multiplying m-HPPH concentrations by 2.3.     

The magnetic susceptibilities of cobaltocene and chromocene

The magnetic susceptibilities of cobaltocene and chromocene have been measured between 83 and 293 K; for cobaltocene the results suggest an appreciable orthorhombic splitting of the ²∏(σ²πδ⁴ ground state, whilst for chromocene the data provide further support for the ³Δ(σδ³) ground state previously deduced.     

CHEMISTRY OF SINGLET OXYGEN—XXV. PHOTOOXYGENATION OF METHIONINE*

Abstract— Methionine (Met) photooxidation sensitized by rose bengal has been studied as a function of pH and other variables. At pH ≤ 6, the reaction is a simple one, 2 Met + O₂→ 2 Methionine sulfoxide (MetO). At pH 6–10, another mechanism becomes important, leading to dehydromethionine; the structure of this compound was correctly assigned by Lavine (1945) as the heterocyclic N-S compound 2. One mole of H₂O₂ is also produced in this process. Dehydromethionine hydrolyzes slowly to MetO. Above pH9, a process leading directly to MetO + H₂O₂ becomes important. The stoichiometry of the latter two processes are Met + O₂+ H₂O → MetO + H₂O₂; competition among these three processes accounts for the puzzling variations in O₂ uptake. N-Formylated derivatives of methionine undergo only the first and third processes. Substantial catalytic effects of buffers complicate the picture. All the reactions appear to involve singlet oxygen, since there is the predicted effect of D₂O vs H₂O on the rate of reaction, although the situation is complicated by apparent aggregation of Met above 5 mM.     

Effect of amine ligand bulk on the interaction of methionine with platinum(II) diamine complexes

Molecular mechanics and dynamics calculations have been used in conjunction with experimental data to study the effects of amine ligand bulk on the formation of both guanine and methionine complexes with platinum diamine compounds. The AMBER force field has been supplemented with previous modifications [Yao; et al. Inorg. Chem. 1994, 33, 6061-6077. Cerasino; et al. Inorg. Chem. 1997, 36, 6070-6079] and has been further modified to include parameters for platinum bound to the sulfur atom of methionine. Molecular mechanics calculations with this modified AMBER force field have suggested that a platinum complex with two sulfur-bound methionine ligands and a bulky diamine ligand (N,N,N',N'-tetramethylethylenediamine, Me(4)en) would have severe interligand clashes; such interligand clashes are less pronounced in bis(9-ethylguanine) complexes. Consistent with these observations, NMR studies with [Pt(Me(4)en)(D(2)O)(2)](2+) have indicated that guanine 5'-monophosphate reacts in a 2:1 guanine:platinum ratio while both methionine and N-acetylmethionine react with only a 1:1 stoichiometry. Methionine forms a chelate via the sulfur and nitrogen atoms whereas N-acetylmethionine forms a chelate via the sulfur and oxygen atoms. The oxygen of the latter chelate can be displaced by the addition of guanosine 5'-monophosphate, although complete displacement of the N-acetylmethionine was not observed.     

Rydberg-London potential for diatomic molecules and unbonded atom pairs

We propose and test a pair potential that is accurate at all relevant distances and simple enough for use in large-scale computer simulations. A combination of the Rydberg potential from spectroscopy and the London inverse-sixth-power energy, the proposed form fits spectroscopically determined potentials better than the Morse, Varnshi, and Hulburt-Hirschfelder potentials and much better than the Lennard-Jones and harmonic potentials. At long distances, it goes smoothly to the London force appropriate for gases and preserves van der Waals's "continuity of the gas and liquid states," which is routinely violated by coefficients assigned to the Lennard-Jones 6-12 form.