Fracture mechanism of liquid‐crystalline epoxy resin systems with different phase structures

A liquid‐crystalline epoxy resin was cured at two different temperatures. The phases of the cured systems clearly showed isotropic and nematic polydomain structures, which depended on the curing temperature. The fracture toughness of the systems was measured, and the fracture mechanism was investigated with polarized IR measurements. The nematic polydomain structure system showed considerably higher fracture toughness than the isotropic structure. Moreover, both systems exhibited a reorientation of the network chains near the fracture surface during the fracture process, and the region of the network reorientation in the nematic polydomain structure system was larger than that in the isotropic structure system. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 4044–4052, 2004     

Reaction of 2-dialkylamino-5-phenyl-1,3-oxathiolium cation with sulphur ylides

The reaction of 2-dialkylamino-5-phenyl-1,3-oxathiolium cation 1 with sulphur ylides 2 was investigated. The behavior of 1 was solvent-dependent. In CH₂Cl₂, carbamate ester 3 was obtained: in CH₃CN, the intermediate sulphonium salt 5, which on hydrolysis gave 3, was isolated. On the other hand, reaction in MeOH gave the diphenacyl derivative 6. The reaction mechanism is discussed.     

Grinding-induced equimolar complex formation between thiourea and ethenzamide

We prepared and characterized a grinding-induced equimolar complex of thiourea with ethenzamide. When thiourea and ethenzamide were co-ground at a molar ratio of 3 : 1, new powder X-ray diffraction (PXRD) peaks were observed in addition to PXRD peaks of thiourea crystals. The optimum stoichiometry of the new structure was confirmed as 1 : 1 mol/mol. Effect of grinding time on the thiourea-ethenzamide equimolar complex formation was investigated by using PXRD, differential scanning calorimetry and Fourier transform infrared spectroscopy. The equimolar crystal structure was confirmed by X-ray diffraction measurements of the single crystal which was recrystallized from ethanol. It was found that the intermolecular hydrogen bond formations between thiourea and ethenzamide molecules contributed to the equimolar complex formation. The complex formation was not observed in the cases where benzamide, salicylamide or 3-ethoxybenzamide was co-ground with thiourea. 2-Alcoxyl benzamide structures should be required for the grinding-induced equimolar complex formation with thiourea.     

Magnetoresistance of Fe3O4/Au/Fe3O4 and Fe3O4/Au/Fe spin-valve structures

A detailed study of the in-plane magnetotransport properties of spin valves with one and two Fe₃O₄ electrodes is presented. Fe₃O₄/Au/Fe₃O₄ spin valves exhibit a clear anisotropic magnetoresistance in small magnetic fields but no giant magnetoresistance (GMR). The absence of GMR in these structures is due to simultaneous magnetization reversal in the two Fe₃O₄ layers. By contrast, a negative GMR effect is measured on Fe₃O₄/Au/Fe spin valves. The negative GMR is attributed to an electron spin scattering asymmetry at the Fe₃O₄/Au interface or an induced spin scattering asymmetry in the Au interfacial layers.     

Acoustic spectroscopy and electrical characterization of SiO2/Si structures with ultrathin SiO2 layers formed by nitric acid oxidation

Ultrathin silicon dioxide (SiO₂) layers formed on Si substrate with nitric acid have been investigated using both acoustic deep-level transient spectroscopy (A-DLTS) and electrical methods to characterize the interface states. The set of SiO₂/Si structures formed in different conditions (reaction time, concentrations of nitric acid (HNO₃), and SiO₂ thickness [3–9 nm]) was prepared. The leakage current density was decreased by post-oxidation annealing (POA) treatment at 250°C in pure nitrogen for 1 h and/or post-metallization annealing (PMA) treatment at 250°C in a hydrogen atmosphere for 1 h. All structures of the set, except electrical investigation, current-voltage (I - V), and capacitance — voltage (C - V) measurements, were investigated using A-DLTS to find both the interface states distribution and the role of POA and/or PMA treatment on the interface-state occurrence and distribution. The evident decreases of interface states and shift of their activation energies in the structures with PMA treatment in comparison with POA treatment were observed in most of the investigated structures. The results are analyzed and discussed.      

Focal length measurement of a varifocal liquid lens with capacitance detection

This paper reports on a detailed deformation model of varifocal liquid lenses fabricated by Parylene-on-liquid-deposition (POLD), which can be applied to measure and adjust the focal length of such lenses without using extra sensors or sensing mechanisms. The lens was fabricated by encapsulating a liquid between a transparent electrode and a polymer film that was covered with a metal electrode. When voltage is applied to the two electrodes, the lens deforms due to the electrostatic force, and its focal length and the capacitance between the two electrodes change simultaneously. This characteristic enables the focal length of the lens to be adjusted and detected by measuring the capacitance change. The focal length of the fabricated varifocal liquid lens changed from 153.6 to 82.6 mm by applying 150-V. The focal length change of the liquid lens was calculated from the change in its capacitance. Finally, to confirm the efficiency of this varifocal liquid lens, we fabricated a confocal distance sensor using the lens for laser scanning and demonstrated that this system can be used to measure distances of 94–140 mm with an average error of 0.83 mm and a standard deviation of 0.77 mm.     

Study of Strangeness Photoproduction on the Neutron in the Threshold Region

Photoproduction of the neutral kaon on the deuteron has been investigated at the Research Center for Electron Photon Science, Tohoku University. We constructed the Neutral Kaon Spectrometer-2 for the detection of charged particles from the decay of the neutral kaon and the hyperon. We obtained a momentum distribution of K ⁰ with the inclusive measurement. It was consistent with the previous measurement. The total cross section of γ + d → K ⁰ + Λ + p was estimated from the measured integral cross section of γ + d → Λ + X. The total cross section with respect to the photon energy was compared with the theoretical calculations. It favored the Saclay-Lyon A model calculation with the ratio of the neutral to charged coupling constants of the axial-vector meson, K ₁, as ~ ?1.5. The energy dependence and the magnitude of the total cross section were similar to the total cross section of γ + p → K ⁺ Λ.     

Non-nearest-neighbor jumps in 2D diffusion: Pd on W(110)

A variety of jumps has in the past been identified in diffusion of atoms on 1D channeled surfaces. To establish the jump processes important in diffusion on a 2D surface, the movement of individual Pd atoms has been examined on W(110). From the distribution of displacements of Pd at high temperatures, double jumps are found along the close-packed <111>. For the first time, sizable differences are also observed between the mean-square displacements along x and y, which demonstrate unexpected contributions from jumps along <110>, but not along <001>. These jumps proceed over activation barriers higher than for single jumps, under conditions predicted from previous work with Pd on the channeled W(211).     

An intense terahertz radiation source at the Compact ERL

The Compact ERL is an energy recovery LINAC (ERL) test facility that is planned for KEK. The circumference of the recirculation path will be 70 m. Initially, the beam energy will be about 65 MeV and the current about 10 mA. Although the primary purpose of the machine is to aid the development of the key technologies that are essential for building an ultra-brilliant new synchrotron light source based on an ERL, the Compact ERL itself has great potential as an intense source of terahertz radiation. To generate the intense terahertz radiation, an electron bunch of a very short bunch length is required and bunch compression is inevitable. We discuss the parameters of the Compact ERL, present the results of a simulation of bunch compression, and make an estimate of the generated coherent synchrotron radiation.     

Interferometers for displacement-noise-free gravitational-wave detection

We propose a class of displacement- and laser-noise-free gravitational-wave-interferometer configurations, which does not sense nongeodesic mirror motion and laser noise, but provides a nonvanishing gravitational-wave signal. Our interferometers consist of four mirrors and two beam splitters, which form four Mach-Zehnder interferometers. By contrast to previous works, no composite mirrors with multiple reflective surfaces are required. Each mirror in our configuration is sensed redundantly, by at least two pairs of incident and reflected beams. Displacement- and laser-noise-free detection is achieved when output signals from these four interferometers are combined appropriately. Our 3-dimensional interferometer configuration has a low-frequency response proportional to f2, which is better than the f3 achievable by previous 2-dimensional configurations.