Non-destructive rapid analysis of brominated flame retardants in electrical and electronic equipment using Raman spectroscopy.

Using Raman spectroscopy without any preparation, we analyzed the brominated flame retardant, polybromodiphenyl ethers (PBDEs), which has been prohibited by the European Union. The typical Raman bands of PBDEs, which are clearly different from those of other brominated flame retardants, are from 100 to 300 cm(-1). In our analysis, the detection limit was about 100 ppm, and the analysis took about 1 min, whereas the usual method of solvent extraction using gas chromatography/mass spectroscopy takes 50 h.     

Synthesis and orientation study of a magnetically aligned liquid‐crystalline chitin/poly(acrylic acid) composite

A high magnetic field of 5 T was used to fabricate a magnetically aligned, optically anisotropic, liquid‐crystalline chitin/poly(acrylic acid) composite. The aligned mesophase was fixed by photoinitiated free‐radical polymerization. From an examination of polarized optical micrographs and an X‐ray diffraction study, a high degree of orientation of 0.70 was observed for the composite with a higher liquid‐crystalline chitin concentration (10.70 wt %); the orientation was reduced with a decreased chitin concentration at a given acrylic acid concentration. The X‐ray data for the developed composite showed a uniplanar orientation for the chitin crystallites, with its molecular long axes perpendicular to the direction of the magnetic field. © 2003 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 41: 711–714, 2003     

Effects of Si−Al composition on the fluorescence spectra of 1-naphthol during the sol-gel-xerogel transitions

A systematic study has been carried out on the characteristic changes in the fluorescence spectra of 1-naphthol doped in the sol-gel-xerogel transition systems comprised of tetraethyl orthosilicate and diisobutoxyaluminium triethylsilicate catalyzed by a small amount of HCl, NH₄OH, as well as under uncatalyzed conditions. In the systems containing large amounts of silicon, the fluorescence of 1-naphthol shifts to the red (a predominant emission from the ¹L_a state) during the first stage of the reaction. This red shift indicates an increase in the polarity of the matrix surrounding 1-naphthol. In the second stage of the reaction, the spectrum shifts to the blue (a predominant emission from the ¹L_b state), reflecting an increase in the micro-viscosity around 1-naphthol. In the systems containing relatively large amounts of aluminum, however, the spectrum just after mixing shows a larger red shift than that originating from the ¹L₂ emission. This large red-shifted fluorescence reflects the formation of a complex between 1-naphthol and the −O−Al−O−Si−O-network. The spectrum then shifted to the blue. The spectral behaviours observed indicate that there is a large and dynamic molecular-level change in the physicochemical properties of the matrix surrounding the 1-naphthol molecules during the sol-gel-xerogel transitions of the systems while the gelation phenomenon reflects macroscopic inflexibility although it is completely different from the restriction of movement at the molecular level.     

Adsorption of anions to zirconium(IV) and titanium(IV) chemically immobilized on gel-phase

Adsorption behaviors of 25 anions to zirconium(IV) and titanium(IV) chemically immobilized on a gel-phase were studied by ion chromatography and by batch adsorption experiments. The affinities of Zr(IV) to iminodiacetate as an anchoring group and to anions as a sample are much stronger than those of Ti(IV). On a Zr(IV) column, fourteen anions showed no retention, four anions showed pH-dependent retention in a low pH region, and seven anions were irreversibly adsorbed at pH <7. In the last group, fluoride was adsorbed both by the ligand exchange mechanism and the addition mechanism, while phosphate, arsenate and selenite were only by the ligand exchange mechanism. The structures of the adsorbed species are discussed.     

WKB-like wave-functional for a string state and path-dependent phase factor

The variational calculation of the path-ordered phase factor is streamlined. We propose that the wave functional for a string state is approximately of the form

$\text{Ψ[x(σ)=}\text{Π}\text{σ′}\text{K(x(σ′))}\text{P exp}\text{ie∫}\text{A d}\text{x}$

.The real factor K is shown to be proportional to the square root of the dielectric permeability in the Kogut-Susskind-'t Hooft model of colour flux collimation.     

Vertical and direct integration of heterojunction phototransistors and laser diodes

An optoelectronic integrated device based on the concept of vertical and direct integration is described. Four types of integrated devices composed of multiple heterojunction phototransistors and laser diodes are developed and the devices successfully achieve thirteen functions: optical switching, amplification, thresholding, bistability, light-controlled optical bistability, light-controlled optical thresholding, tristability, set and reset functions in tristable states, set and reset functions in tetrastable states, and bistable and tristable flip-flop functions.     

Numerical analysis of dipole sound source around high speed trains

As the maximum speed of high speed trains increases, the effect of aeroacoustic noise on the sound level on the ground becomes increasingly important. In this paper, the distribution of dipole sound sources at the bogie section of high speed trains is predicted numerically. The three-dimensional unsteady flow around a train is solved by the large eddy simulation technique. The time history of vortices shows that unstable shear layer separation at the leading edge of the bogie section sheds vortices periodically. These vortices travel downstream while growing to finally impinge upon the trailing edge of the section. The wavelength of sound produced by these vortices is large compared to the representative length of the bogie section, so that the source region can be regarded as acoustically compact. Thus a compact Green's function adapted to the shape can be used to determine the sound. By coupling the instantaneous flow properties with the compact Green's function, the distribution of dipole sources is obtained. The results reveal a strong dipole source at the trailing edge of the bogie section where the shape changes greatly and the variation of flow with time is also great. On the other hand, the bottom of the bogie section where the shape does not change, or the leading edge and boundary layer where the variation of flow with time is small, cannot generate a strong dipole source.     

Preparation of Y2O3:Eu thin films by excimer-laser-assisted metal organic deposition

Europium-doped yttrium oxide (Y₂O₃:Eu) thin films were successfully deposited on quartz and ITO/glass substrates by excimer-laser-assisted metal organic deposition (ELAMOD) at low temperatures. The effects of laser wavelength and thermal temperature on the films’ crystallinity and photoluminescence properties were investigated. Films irradiated by an ArF laser at 80 mJ/cm² and 400–500°C were highly crystallized compared with those prepared by thermal MOD. In contrast, when the film was irradiated by a KrF laser at 500°C, no crystalline Y₂O₃:Eu was formed. The Y₂O₃:Eu film irradiated by the ArF laser at 80 mJ/cm² and 500°C showed typical PL spectra of Eu³⁺ ions with cubic symmetry and a ⁵D₀→⁷F₂ transition at ∼612 nm. The PL intensity at 612 nm was much higher for the film prepared with ELAMOD than for that prepared by the thermal-assisted process, and the photoemission intensity of the film prepared with ELAMOD strongly depended on the substrate material.     

Polymorphism of 4-Fluorophenylpyruvic Acid Studied by X-Ray Crystallography and Vibrational Spectroscopy

Two polymorphic forms (I and II) of 4-fluorophenylpyruvic acid (F-PPA) were obtained by crystallization from different solvents, showing a melting point at 163.2 and 171.0 °C. Crystal structures of polymorphs I and II were determined by X-ray crystallography. IR and Raman spectra of the two polymorphs were measured and the spectral characteristics were compared with those of phenylpyruvic acid. the two polymorphs show similar molecular and crystal structures to each other, except for the molecular geometries of the enol and the carboxylic acid moieties. Distinct IR spectral differences which result from the crystal field splitting were observed between the two polymorphs.     

Subject Index to Volume 33

This paper reports the investigation of microdroplet sample preparation for phosphate, strontium and rubidium using X-ray fluorescence. Sample filter papers were prepared by drying under several different conditions and the front and the back sides of the filter papers were measured using X-ray fluorescence (XRF), scanning electron microscopy (SEM), X-ray diffraction (XRD), and electron-probe microanalysis (EPMA).

It was reported by Murata and Murokado that the elemental distribution difference between the front and the back sides after drying the filter paper led to erratic data.¹ It has been found that the intensity difference between the front and the back sides was due to the condensation of the material of interest on the surface of the filter papers and the amount of the condensed material on the filter paper was related to the temperature at which the filter paper was dried.

Optimum temperature at which a filter paper is dried and an appropriate internal standard are essential to reproducible measurements.