Atom transfer radical polymerization of methyl methacrylate by copper(I)‐pyridine‐2‐carboximidate catalysts

Pyridine‐2‐carboximidates [methyl ( 1a ), ethyl ( 1b ), isopropyl ( 1c ), cyclopentyl ( 1d ), cyclohexyl ( 1e ), n‐octyl ( 1f ), and benzyl ( 1g )] were prepared from the reaction of 2‐cyanopyridine with the corresponding alcohols. Cyclopentyl‐substituted 1d was found to be a highly effective ligand for copper‐catalyzed atom transfer radical polymerization (ATRP) of methyl methacrylate (MMA). For example, the observed rate constant for a CuBr/ 1d catalytic system was found to be nearly twice as high as the cyclohexyl‐substituted CuBr/ 1e catalytic system [k_obs = (1.19 vs 0.56) × 10^?4 s^?1). The effects of the solvents, temperature, catalyst/initiator, and solvent/monomer ratio on the ATRP of MMA were studied systematically for the CuBr/ 1d catalytic system. The optimum condition for the ATRP of MMA was found to be a 1:2:1:400 [CuBr]_o/[ 1d ]_o/[ethyl 2‐bromoisobutyrate]_o/[MMA]_o ratio at 60 °C in veratrole solution, which yielded well‐defined poly(MMA) with a narrow molecular weight distribution of 1.14. The catalytically active copper complex 2d was isolated from the reaction of CuBr with 1d . Narrow molecular weight distributions as low as 1.06 were achieved for the CuBr/ 1d catalytic system by employing 10% of the deactivator CuBr₂. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 2747–2755, 2004     

Structure of a poly(2,5‐benzimidazole)/phosphoric acid complex

As‐cast films of poly(2,5‐benzimidazole) exhibit uniplanar orientation in which the planes of the aromatic rings lie parallel to the film surface. Upon doping with phosphoric acid, the original crystalline order is lost, but the doped film can be stretched to produce films with uniaxial orientation. After thermal annealing at 540 °C, nine Bragg reflections are resolved in the fiber diagram, and these are indexed by an orthorhombic unit cell with the dimensions a = 18.1 Å, b = 3.5 Å, and c = 11.4 Å, containing four monomer units of two chains. The absence of odd‐order 00l reflections points to a 2₁ chain conformation, which is probably planar so that the aromatic units can be stacked along the b axis. The water and phosphoric acid contents of the crystalline structure cannot be determined exactly because of the presence of extensive amorphous regions that probably have different solvation. The best agreement between the observed and calculated intensities is for an idealized structure containing two phosphoric acids and two water molecules per unit cell. However, the phosphoric acid is probably present mainly in the form of pyrophosphoric acid and its higher oligomers. In addition, the X‐ray data are consistent with a more disordered structure containing chains with random (up and down) polarity and a lack of c‐axis registry. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 2576–2585, 2004     

Stability control of the electrooptic effect with new maleimide copolymers containing photoreactive tricyanopyrrolidene‐based chromophores

New photocrosslinkable maleimide copolymers have been synthesized by the attachment of a tricyanopyrrolidene‐based chromophore. The 2‐(3‐cyano‐4‐(2‐{4‐[hexyl‐(6‐hydroxy‐hexyl)‐amino]‐phenyl}‐vinyl)‐5‐oxo‐1‐{4‐[4‐(3‐oxo‐3‐phenyl‐propenyl)‐ phenoxy]‐butyl}‐1,5‐dihydro‐pyrrol‐2‐ylidene)‐malononitrile chromophore exhibits nonlinear optical activity and contains a chalcone moiety that is sensitive to UV light (λ = 330–360 nm) for crosslink formation. The maleimide monomers have also been functionalized with chalcone moieties. The resultant copolymers exhibit great processability, and one of them shows a maximum electrooptic coefficient of 90 pm/V at 1300 nm. We could control the thermal stability of the electrooptic coefficient with the newly synthesized photoreactive copolymers successfully. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 531–542, 2007     

Kinetic model for hydrocarbon-assisted particulate boron combustion

A kinetic model is presented to describe the high temperature (1800 K < T < 3000 K) surface oxidation of particulate boron in a hydrocarbon combustion environment. The model includes a homogeneous gas-phase B/O/H/C oxidation mechanism consisting of 19 chemical species and 58 forward and reverse elementary reactions, multi-component gas-phase diffusion, and a heterogeneous surface oxidation mechanism consisting of ‘elementary’ adsorption and desorption reaction steps. Thermochemical and kinetic parameters for the surface reactions are estimated from available experimental data and/or elementary transition state arguments. The kinetic processes are treated using a generalized kinetics code, with embedded sensitivity analysis, for the combustion of a one-dimensional (particle radius), spherical particle. Model results are presented for the oxidation of a 200 μm boron particle in a JP-4/air mixture at ambient temperatures of 1400 K and 2000 K. These results include temperature and gas-phase species profiles as a function of radial distance and particle burning rates. © 1994 John Wiley & Sons, Inc.     

Investigation of chemometric calibration performance based on different chemical matrix and signal-to-noise ratio.

The chemometric calibration performance was systematically investigated by two parameters (changing the chemical matrix as well as the signal-to-noise ratio) of the NIR (near-infrared) spectrum. Three different analytes (hexane, cyclohexane, toluene) were selected and heptane was used as a solvent. The degree of spectral difference significantly affected the calibration performance. The largest structural difference between the analyte and the solvent provided the best calibration result for a given signal-to-noise ratio. Additionally, the signal-to-noise ratio of the spectra also directly influenced the calibration performance. Overall, the spectral difference and signal-to-noise ratio were the major factors for governing the chemometric calibration performance, especially in the low-concentration range.     

Semiconducting organic polymer from polyacrylamide–Cu++ chelate and iodine

Semiconducting organic polymer was obtained by the modification of polyacrylamide (PAAm)–Cu⁺⁺ chelate with iodine in acetone. Favorable conditions for preparing the chelate effective for the conduction were investigated. Surface resistivities were affected by the amounts of cupric salts and iodine, satisfactory results being given by about 25 wt % of the salts based on PAAm and more than 1 wt % of iodine on the chelate. The conductivity was also varied with the degree of neutralization of the chelate in solution, and optimal values were obtained by addition of about an equimolar amount of potassium hydroxide to cupric salts. Effective structures of the polymer chelate in solution were assumed on the basis of the visible and the NMR spectra and potentiometric titration.     

Molecular characteristics of the inhibition of human neutrophil elastase by nonsteroidal antiinflammatory drugs

Nonsteroidal antiinflammatory drugs(NSAIDs) are known as clinically effective agents for treatment of inflammatory diseases. Inhibition of cyclooxygenase has been thought to be a major facet of the pharmacological mechanism of NSAIDs. However, it is difficult to ascribe the antiinflammatory effects of NSAIDs solely to the inhibition of prostaglandin synthesis. Human neutrophil elastase (HNElastase; HNE, EC 3.4.21.37) has been known as a causative factor in inflammatory diseases. To investigate the specific relationship between HNElastase inhibition and specificity of molecular structure of several NSAIDs, HNElastase was purified by Ultrogel AcA54 gel filtration, CM-Sephadex ion exchange, and HPLC (with TSK 250 column) chromatography. HNElastase was inhibited by aspirin and salicylate in a competitive manner and by naproxen, ketoprofen, phenylbutazone, and oxyphenbutazone in a partial competative manner, but not by ibuprofen and tolmetin. HNElastase-phenylbutazone-complex showed strong Raman shifts at 200, 440, 1124, 1194, 1384, 1506, and 1768 cm(-1). The Raman bands 1194, 1384, and 1768 cm(-1) may represent evidences of the conformational change at -N=N-phi radical, pyrazol ring, and -C=O radical of the elastase-drug complex, respectively. Phenylbutazone might be bound to HNElastase by ionic and hydrophobic interaction, and masked the active site. Inhibition of HNElastase could be another mechanism of action of NSAIDs besides cyclooxygenase inhibition in the treatment of inflammatory diseases. Different inhibition characteristics of HNE-lastase by NSAIDs such as aspirin, phenylbutazone-like drugs and ineffective drugs could be important points for drawing the criteria for appropriate drugs in clinical application.     

Fast peroxyoxalate chemiluminescence for minimized analytical separation systems

The maximum intensity, Imax, and time required to reach the maximum emission, taumax, for 1-aminopyrene monitored in 1,1'-oxalyldi-4-methylimidazole (OD4MI) chemiluminescence (CL) reactions are approximately 61 times higher and 16 times faster than their respective values for bis(2,4,6-trichlorophenyl)oxalate (TCPO) CL reactions in the presence of imidazole (ImH).     

Exchange interactions in copper(II) complexes with tridentate Schiff bases: EPR and magnetic studies

The influence of the nature of ligands upon the magnetic and EPR properties was investigated for the series of polynuclear Cu(II) complexes with tridentate Schiff bases. A similar tendency of changes in the |J| and D parameters was found for binuclear Cu(II) complexes with ligands derived from condensation of 3-amino-1-propanol with 2-hydroxyaldehydes and acetylacetone as well as for Cu(II) complexes with condensation products of o-aminophenol and β-diketones. The Cu(II) complex with Schiff base of 1-amino-2-propanol and acetylacetone exhibits ferromagnetic behaviour suggesting tetrameric structure.