Chemically modified electrode for the determination of gold — an electrochemical and spectrophotometric study

The voltammetric determination of trace amounts of gold has been studied using a chemically modified electrode. The role played by the host molecule attached to a glassy carbon electrode (GCE), i.e. 8,9,17,18-dibenzo-1,7-dioxa-10,13,16-triazacyclooctadecane (DDTC), was examined by electrochemical and spectrochemical techniques. Cathodic stripping voltammetry (CSV) was applied to study the various parameters affecting the affinity of gold ions by a DDTC modified electrode as well as the interference by other ions. Finally, the method has been successfully applied to determine gold traces in a geological sample. In addition, the formation of an AuCl ₄ ^– -DDTC complex was followed and its formation constant was determined by spectrophotometry.     

A new approach to micropatterning: application of potential-assisted ion transfer at the liquid-liquid interface for the local metal deposition

A new approach to micropatterning is demonstrated. The approach is based on driving an electrochemical process at the solid-liquid interface through the formation of a flux of ions from a micropipet that is held in close proximity to the surface. The flux of ions is generated by the so-called potential assisted ion transfer at the interface between two immiscible electrolyte solutions (ITIES). As a model system, the local deposition of silver was examined. Specifically, a constant potential, which was applied to a micropipet filled with an aqueous solution of silver ions, caused the transfer of Ag(+) into the outer nitrobenzene (NB) solution that consisted of an electrolyte, tetrabutylammonium tetrakis[4-chlorophenyl]borate (TBATPBCl). To facilitate the transfer of silver ions a macrocyclic ligand, that is, dibenzo-24-crown-8 (DB24C8), was added to the organic phase. The Faradaic current of this micro-ITIES was used as a means of controlling the tip-surface distance in scanning electrochemical microscopy (SECM) and depositing silver microstructures on a gold substrate.     

Optical loss measurements in femtosecond laser written waveguides in glass

The optical loss is an important parameter for waveguides used in integrated optics. We measured the optical loss in waveguides written in silicate glass slides with high repetition-rate (MHz) femtosecond laser pulses. The average transmission loss of straight waveguides is about 0.3 dB/mm at a wavelength of 633 nm and 0.05 dB/mm at a wavelength of 1.55 μm. The loss is not polarization dependent and the waveguides allow a minimum bending radius of 36 mm without additional loss. The average numerical aperture of the waveguides is 0.065 at a wavelength of 633 nm and 0.045 at a wavelength of 1.55 μm. In straight waveguides more than 90% of the transmission loss is due to scattering.     

Anomalous diffusion in living yeast cells

The viscoelastic properties of the cytoplasm of living yeast cells were investigated by studying the motion of lipid granules naturally occurring in the cytoplasm. A large frequency range of observation was obtained by a combination of video-based and laser-based tracking methods. At time scales from 10(-4) to 10(2) s, the granules typically perform subdiffusive motion with characteristics different from previous measurements in living cells. This subdiffusive behavior is thought to be due to the presence of polymer networks and membranous structures in the cytoplasm. Consistent with this hypothesis, we observe that the motion becomes less subdiffusive upon actin disruption.     

High-spin states in the 96Tc nucleus

High-spin states in the ⁹⁶Tc nucleus have been studied with the reactions ⁸²Se(¹⁹F,5nγ) at 68 MeV and Zn(³⁶S,αpxn) at 130 MeV. Two γ-ray cascades (irregular bandlike structures) have been observed up to an excitation energy of about 10 MeV and spin 21-22?. Received: 19 January 2001 / Accepted: 30 March 2001     

Raman Analysis of Polymerization of APST Molecule

In this work we investigated the solidification of aminopropylsilanetriol dissolved in water (∼25%) under different conditions by Raman spectroscopy. The solidification was carried out at three different temperatures 8 °C, 23 °C and 60 °C. The influence of electromagnetic radiation on the polymerization process was also studied. Samples were held to solidify in dark and at UV (254 nm and 356nm) spectral range. In order to investigate the influence of the substrate on the resulting polymer structure, teflon, PVC, glass, brass and silica were used. Best ordered polymerized structure was achieved for samples deposited on plastics and solidified in dark, at room temperature.     

Simultaneous Determination of 11 Elements in Fly Ash by Inductively Coupled Plasma Orthogonal Acceleration Time-of-Flight Mass Spectrometry After Closed-Vessel Microwave-Assisted Extraction with Ammonium Fluoride

A method for simultaneous multi-element analysis of fly ash samples by inductively coupled plasma orthogonal acceleration time-of-flight mass spectrometry (oaTOF-ICP-MS) after closed-vessel microwave extraction with ammonium fluoride was introduced here. Corrosive and/or toxic acids like HF, HCl or HClO₄, as well as HNO₃, which are commonly used during sample preparation of the fly ash samples, are avoided in this method. The spectral effects due to the formation of different Cl, Na, K, Ca, Mg-containing polyatomic species interfering with the determination of a number of elements like As, Se or Ni during the oaTOF-ICP-MS analysis are negligible. Under the optimum experimental extraction conditions evaluated using a fractional factorial design (10 mg of the sample extracted with 5 mL of 140 g/L NH₄F for 10 min at 200°C), analysis of the resulting supernatant with Rh as an internal standard enabled precise and accurate simultaneous determination of 11 elements (Li, Be, Ni, As, Se, Rb, Sb, Cs, W, Tl and U) at trace and ultratrace levels. The accuracy was assessed by analysing two certified reference materials, namely Fine Fly Ash CTA-FFA-1 and Constituent Elements in Coal Fly Ash Standard Reference Material® 1633b. The precision of the reported method was better than 10%.     

2,8'-disubstituted-1,1'-binaphthyls: a new pattern in chiral ligands

The title binaphthyls 19 and 26, which are the positional isomers of 2-methoxy-2'-(diphenylphosphino)-1,1'-binaphthyl (MOP, 19) and 2-amino-2'-hydroxy-1,1'-binaphthyl (NOBIN, 26), have been synthesized by Suzuki coupling as the key step (10 + 15-->18), followed by functional group transformations, involving C-P and C-N bond formation (18-->19 and 18-->23). Racemic intermediate 22 was resolved by co-crystallization with N-benzylcinchonidinium chloride and the absolute configuration determined by X-ray crystallography. These novel binaphthyls are configurationally stable and, as such, potentially usable as chiral ligands in asymmetric reactions. Michael addition of the glycine-derived enolate 40 to methyl acrylate, carried out in the presence of (R)-(-)-27 as the chiral phase-transfer catalyst, afforded L-glutamic acid (S)-(+)-43 of 92% ee (after hydrolysis of the primary product).     

Optimization of SPME-Arrow-GC/MS Method for Determination of Free and Bound Volatile Organic Compounds from Grape Skins

(1) Background: Solid phase microextraction (SPME)-Arrow is a new extraction technology recently employed in the analysis of volatiles in food materials. Grape volatile organic compounds (VOC) have a crucial role in the winemaking industry due to their sensory characteristics of wine.; (2) Methods: Box–Behnken experimental design and response surface methodology were used to optimise SPME-Arrow conditions (extraction temperature, incubation time, exposure time, desorption time). Analyzed VOCs were free VOCs directly from grape skins and bound VOCs released from grape skins by acid hydrolysis.; (3) Results: The most significant factors were extraction temperature and exposure time for both free and bound VOCs. For both factors, an increase in their values positively affected the extraction efficiency for almost all classes of VOCs. For free VOCs, the optimum extraction conditions are: extraction temperature 60 °C, incubation time 20 min, exposure time 49 min, and desorption time 7 min, while for the bound VOCs are: extraction temperature 60 °C, incubation time 20 min, exposure time 60 min, desorption time 7 min.; (4) Conclusions: Application of the optimized method provides a powerful tool in the analysis of major classes of volatile organic compounds from grape skins, which can be applied to a large number of samples.     

Immunosensor for the Measurement of Human Serum Albumin in Urine Based on the Spreeta Surface Plasmon Resonance Sensor

The application of SPR for measurement of the concentration of human serum albumin (HSA) in urine was studied using the compact integrated SPR sensing system Spreeta. HSA was immobilized via cystamine and glutaraldehyde onto the gold sensing area and a competitive assay for HSA was developed using a limited amount of the monoclonal antibody AL-01 in solution. Measurements were carried out in the flow-through mode and the interaction between immobilized HSA and antibody was observed in real time. To obtain reproducible results, different conditions of the measurement (method of immobilization of HSA, data evaluation, concentration of antibody, regeneration procedure) were tested. The calibration curve for clinically relevant concentrations of HSA in urine samples was constructed using 300-times diluted antibody in the form of ascites fluid. The measuring range was between 0.1 and 5 mg/l of HSA, the sensing surface was successfully regenerated and suitable for more than 20 assays. The developed method was tested on real samples of urine; to overcome the non-specific adsorption of urine components, the differential approach was adopted and the measured signal was corrected by subtraction of the response observed in the absence of the antibody.