Determination of polyethylene glycols by precipitation with iodine

Two methods for the determination of polyethylene glycols (PEGs) in aqueous solution by precipitation with iodine have been developed. For PEGs with molecular weight 4 x 10(3)-2 x 10(4) the excess of iodine is titrated with thiosulphate, and for PEGs with average m.w. > 2 x 10(4) turbidimetric measurement is used. Both methods are relatively simple and give accurate and reproducible results.     

Encapsulation of porphyrins and chlorins in biodegradable nanoparticles: the effect of dye lipophilicity on the extravasation and the photothrombic activity. A comparative study

In the present work, we performed a preclinical inter-comparison study using several photosensitizers with the goal of optimizing photodynamic therapy (PDT) for the treatment of choroidal neovascularization (CNV) associated with age-related macular degeneration. The tested molecules were the porphyrins meso-tetraphenylporphyrin (TPP) and meso-tetra-(4-carboxyphenyl)-porphyrin (TCPP), and the chlorins pheophorbide-a (Pheo-a) and chlorin e(6) (Ce(6)). Each of these molecules was entrapped in biodegradable nanoparticles (NP) based on poly(d,l-lactic acid). The influence of the degree of lipophilicity on the incorporation efficiency of the drug in the NPs, and on the dye leakage from blood vessels as well as on the photothrombic efficiency was investigated using the chick chorioallantoic membrane (CAM) as in vivo model. NP characterization showed that the dye was more effectively entrapped in the polymeric matrix when its degree of lipophilicity increased. While less lipophilic compounds (TCPP, Ce(6)) extravasate rather easily, the more lipophilic dyes (TPP, Pheo-a) tend to remain inside the blood vessels. After injection of a drug dose of 1 mg/kg body weight and a drug-light application interval of 1 min, irradiation with light doses ranging from 5 to 20 J/cm(2) led to the highest photothrombic efficiency when using the NPs loaded with the most lipophilic molecule (TPP). The latter induced vascular damage, which was significantly higher than that observed with the other molecules tested. Thus, in addition to minimal leakage from blood vessels, the TPP in NP formulation exhibited photothrombic efficiency similar to Visudyne which was also tested in the CAM model.     

Polymerization of mono- and α,ω-dicarbanionic polystyryl-barium—II. Effect of added lithium salt in THF

The propagation rate of polystyryl-barium was studied in THF at 20°, in the presence of small amounts of lithium chloride. These kinetic results furnish a new method for the determination of triple ion formation in both mono- and α,ω-dicarbanionic polystyryl-barium. The constant of triple ion association of monocarbanionic (PS^?)₂Ba, K_T, was found to be 3.7 × 10⁵ l M^?1, close to the value calculated from published data.

The triple ion association constant of α,ω-dicarbanionic PS^2?Ba²⁺, K_DT, is about 1.2 × 10⁶ l M^?1.

Taking into account the cyclic structure of α,ω-dicarbanionic PS^2?Ba²⁺ and a statistical factor 3 between K_T and K_DT, it is concluded that mono- and dicarbanionic polystyryl-barium have similar abilities for triple ion formation. Nevertheless, stronger associations are observed for dicarbanionic oligomers with a degree of polymerization lower than 5–7.     

Anderson localization for multi-dimensional systems at large disorder or large energy

We prove that discrete Schrödinger operators on ^d with a random-potential have almost-surely only pure point spectrum and exponentially decaying eigenfunctions for large disorder or large energy. This is the first proof of localization for multi-dimensional Anderson models.Groupe de recherche 048 du CNRS     

Controlling the framework formation of silver(I) coordination polymers with 1,4-bis(phenylthio)butane by varying the solvents,metal-to-ligand ratio,and counteranions

The reactions of 1,4-bis(phenylthio)butane (L) with Ag(I) salts in varied conditions (varying the solvents, metal-to-ligand ratios, and counteranions) lead to the formation of four new two-dimensional (2D) coordination polymers with different network structures: [Ag(2)L(3)(ClO(4))(2)](infinity) 1, [Ag(2)L(3)(ClO(4))(2) x CH(3)OH](infinity) 2, [[AgL(2)](ClO(4))](infinity) 3, and [AgLNO(3)](infinity) 4. All the structures were established by single-crystal X-ray diffraction analysis. Crystal data for 1: triclinic, P-1, a = 11.0253(9) A, b = 11.3455(9) A, c = 11.5231(9) A, alpha = 93.931(2) degrees, beta = 92.689(2) degrees, gamma = 112.9810(10) degrees, Z = 2. 2: triclinic, P-1, a = 11.9147(13) A, b = 16.1534(17) A, c = 16.2259(17) A, alpha = 74.977(2) degrees, beta = 69.030(2) degrees, gamma = 69.986(2) degrees, Z = 2. 3: triclinic, P-1, a = 12.1617(9) A, b = 12.5054(10) A, c = 13.1547(10) A, alpha = 64.3370(10) degrees, beta =85.938 (2) degrees, gamma = 69.3010(10) degrees, Z = 2. 4: monoclinic, P2(1)/c, a = 5.4032(17) A, b = 16.974(6) A, c = 19.489(6) A, beta = 94.234(6) degrees, Z = 4. In all four complexes, each Ag(I) center has a tetracoordination geometry, and the 2D networks consist of fused large macrometallacyclic ring systems. The "hexagonal" 42-membered rings, Ag(6)L(6), observed in 1 and 2 are nearly identical, which could be considered as unique examples of self-sustaining noninterpenetrated frameworks formed with flexible ligands. The repeating rectangular 28-membered macrometallacycle, Ag(4)L(4), is the basis for the network of 3, in which the perchlorate anions occupy the voids to prevent the ring from collapsing. In 4, columns of the fused rectangular 22-membered rings, Ag(4)L(2)(NO(3))(2), are cross-linked through the L ligands to form a unique 2D network consisting of two types of 22-membered repeating units.     

Theoretical evaluation of atomic charges to be integrated into conformational analyses of neutral lipids

Conformational analyses of large molecules as fatty acids and triglycerides are usually amenable by molecular mechanics. A correct evaluation of the electrostatic energy term is thus crucial in determining reliable results. In this contribution, we have considered the most abundant fatty acids in biomembranes, i.e., lauric, stearic, oleic, and elaidic acid, and the corresponding triglycerides, i.e., trilaurin, tristearin, triolein, and trielaidin, and estimated the Mulliken and potential-derived charges both at the semiempirical AM 1 and ab initio HF MO STO -3G level. Atomic charges obtained by the Mulliken population analysis do not take into account the full geometry of the molecule. On the contrary, the change of conformation, due to different chains length or the presence of a trans or cis double bond, greatly influences the repartition of the potential-derived charges. A systematic comparative analysis shows that charges calculated by AM 1 are not suitable because as they do not reproduce potential-derived charges obtained by ab initio. © 1993 John Wiley & Sons, Inc.     

A simple approach for improving the hybrid MMVB force field: application to the photoisomerization of s-cis butadiene

MMVB is a QM/MM hybrid method, consisting of a molecular mechanics force field coupled to a valence bond Heisenberg Hamiltonian parametrized from ab initio CASSCF calculations on several prototype molecules. The Heisenberg Hamiltonian matrix elements Q(ij) and K(ij), whose expressions are partitioned here into a primary contribution and second-order correction terms, are calculated analytically in MMVB. When the original MMVB force field fails to produce potential energy surfaces accurate enough for dynamics calculations, we show that significant improvements can be made by refitting the second-order correction terms for the particular molecule(s) being studied. This "local" reparametrization is based on values of K(ij) extracted (using effective Hamiltonian techniques) from CASSCF calculations on the same molecule(s). The method is demonstrated for the photoisomerization of s-cis butadiene, and we explain how the correction terms that enabled a successful MMVB dynamics study [Garavelli, M.; Bernardi, F.; Olivucci, M.; Bearpark, M. J.; Klein, S.; Robb, M. A. J Phys Chem A 2001, 105, 11496] were refitted.     

Methanofullerene Molecular Scaffolding: Towards C60-substituted poly(triacetylenes) and expanded radialenes,preparation of a C60–C70 hybrid derivative,and a novel macrocyclization reaction

The synthesis of (E)-hex-3-ene-l, 5-diynes and 3-methylidenepenta-1, 4-diynes with pendant methano[60]-fullerene moieties as precursors to C₆₀-substituted poly(triacetylenes) (PTAs, Fig. 1) and expanded radialenes (Fig. 2) is described. The Bingel reaction of diethyl (E)-2, 3-dialkynylbut-2-ene-1, 4-diyl bis(2-bromopropane-dioates) 5 and 6 with two C₆₀ molecules (Scheme 2) afforded the monomeric, silyl-protected PTA precursors 9 and 10 which, however, could not be effectively desilylated (Scheme 4). Also formed during the synthesis of 9 and 10 , as well as during the reaction of C₆₀ with thedesilylated analogue 16 (Scheme 5 ), were the macrocyclic products 11, 12 , and 17 , respectively, resulting from double Bingel addition to one C-sphere. Rigorous analysis revealed that this novel macrocyclization reaction proceeds with complete regio- and diastereoselectivity. The second approach to a suitable PTA monomer attempted N, N′-dicyclohexylcarbodiimide(DCC)-mediated esterification of (E)-2, 3-diethynylbut-2-ene-l, 4-diol ( 18 , Scheme 6) with mono-esterified methanofullerene-dicarboxylic acid 23 ; however, this synthesis yielded only the corresponding decarboxylated methanofullerene-carboxylic ester 27 (Scheme 7). To prevent decarboxylation, a spacer was inserted between the reacting carboxylic-acid moiety and the methane C-atom in carboxymethyl ethyl 1, 2-methano[60]fullerene-61, 61-dicarboxylate ( 28 , Scheme 8), and DCC-mediated esterification with diol 18 afforded PTA monomer 32 in good yield. The formation of a suitable monomeric precursor 38 to C₆₀-substituted expanded radialenes was achieved in 5 steps starting from dihydroxyacetone (Schemes 9 and 10), with the final step consisting of the DCC-mediated esterification of 28 with 2-[1-ethynyl(prop-2-ynylidene)]propane-1, 3-diol ( 33 ). The first mixed C₆₀-C₇₀ fullerene derivative 49 , consisting of two methano[60]fullerenes attached to a methano[70]fullerene, was also prepared and fully characterized (Scheme 13). The C_s-symmetrical hybrid compound was obtained by DCC-mediated esterification of bis[2-(2-hydroxy-ethoxy)ethyl] 1, 2-methano[70]fullerene-71, 71-dicarboxylate ( 46 ) with an excess of the C₆₀-carboxylic acid 28 . The presence of two different fullerenes in the same molecule was reflected by its UV/VIS spectrum, which displayed the characteristic absorption bands of both the C₇₀ and C₆₀ mono-adducts, but at the same time indicated no electronic interaction between the different fullerene moieties. Cyclic voltammetry showed two reversible reduction steps for 49 , and comparison with the corresponding C₇₀ and C₆₀ mono-adducts 46 and 30 indicated that the three fullerenes in the composite fullerene compound behave as independent redox centers.     

Production and Purification of Pectinase from Bacillus subtilis 15A-B92 and Its Biotechnological Applications

Enzymes that degrade pectin are called pectinases. Pectinases of microbial origin are used in juice clarification as the process is cost-effective. This study screened a pectinase-producing bacterium isolated from soil and identified as Bacillus subtilis 15A B-92 based on the 16S rRNA molecular technique. The purified pectinase from the isolate showed 99.6 U/mg specific activity and 11.6-fold purity. The molecular weight of the purified bacterial pectinase was 14.41 ± 1 kD. Optimum pectinase activity was found at pH 4.5 and 50 °C, and the enzyme was 100% stable for 3.5 h in these conditions. No enzymatic inhibition or activation effect was seen with Fe²⁺, Ca²⁺, or Mg²⁺. However, a slight inhibition was seen with Cu²⁺, Mn²⁺, and Zn²⁺. Tween 20 and 80 slightly inhibited the pectinase, whereas iodoacetic acid (IAA), ethylenediaminetetraacetate (EDTA), urea, and sodium dodecyl sulfate (SDS) showed potent inhibition. The bacterial pectinase degraded citrus pectin (100%); however, it was inactive in the presence of galactose. With citrus pectin as the substrate, the Km and Vmax were calculated as 1.72 mg/mL and 1609 U/g, respectively. The high affinity of pectinase for its substrate makes the process cost-effective when utilized in food industries. The obtained pectinase was able to clarify orange and apple juices, justifying its application in the food industry.     

Steroregularity of Polystyrenes Obtained by New Complex Bases

The stereoregularity of polystyrenes obtained with complex bases and salt complex bases in various solvents was determined by ¹³C-NMR spectroscopy. Polystyrenes produced by complex bases are mostly syndiotactic and obey Bernoullian statistics.