聚丙烯孔洞铁电驻极体膜的电极化及其电荷动态特性

根据栅控恒压电晕充电组合反极性电晕补偿充电法的实验结果计算出铁电驻极体的极化强度.结果说明，伴随着薄膜内孔洞气体的Paschen击穿，该铁电体的极化强度随栅压增加而显著上升.利用上述充电方法和热刺激放电(TSD)谱的分析讨论了这类空间电荷型宏观电偶极子，及与其补偿的空间电荷热退极化的电荷动态特性；阐明了这两类俘获电荷的能阱分布，即构成宏观电偶极子的位于孔洞上下介质层内的等值异号空间电荷分别被俘获在深、浅两种能值陷阱内，而位于薄膜表面层的注入空间电荷则被俘获在中等能值陷阱中. 关键词： 反极性电晕补偿充电法 铁电驻极体 充电电流 热刺激放电     

恒流电晕充电对聚四氟乙烯多孔薄膜驻极体驻极态的影响

利用常温下恒流和恒压电晕充电、充电后的等温表面电位衰减、热刺激放电和扫描电镜等实 验手段研究了恒流和恒压电晕充电技术对聚四氟乙烯多孔薄膜驻极体驻极态的影响.与恒压电晕充电相比较，恒流电晕充电时由于流过薄膜的电流恒定，增加了注入电荷在多孔结构厚度方向界面处的俘获概率，使沉积电荷密度上升，改善了驻极体的储电能力.然而，这些位于不同层深多孔界面处的俘获电荷在这类功能膜储存或使用过程中，经外激发从脱阱位置 以跳动（hopping）模式输运至背电极的路径相对缩短将导致脱阱电荷衰减较快. 关键词： 恒流电晕充电 聚四氟乙烯多孔膜 驻极体 电荷稳定性     

Lagrange multiplier method used in BESⅢ

In this paper, the kinematic fitting with the Lagrange multiplier method has been studied for BESⅢ experiment. First we introduce the Lagrange multiplier method and implement kinematic constraints. Then we present the performance of the kinematic fitting algorithm. With the kinematic fitting, we can improve the resolution of track parameters and reduce the background.     

Syntheses of Novel Asymmetric Cyclopentanone Dyes and Measurement of Two－photon Absorption Cross－section

A simple synthesis route with a high yield of novel asymmetric cyclopentanone dyes 3a—3e and their highly two-photon up-converted fluorescences are reported. The dyes have good solubilities in most of ordi-nary solvents, a wide UV absorption wavelength range from 380—540 nm, and high fluorescence quantum yields. The two-photon absorption cross-sections of dyes 3a—M were measured in chloroform by a two-pho-ton induced fluorescence method. All of these properties of the new dyes make them suitable for being used as two-photon fluorescent probes.     

Nonparametric Quantile Inference for Cause-specific Residual Life Function Under Length-biased Sampling

This paper considers a competing risks model for right-censored and length-biased survival data from prevalent sampling. We propose a nonparametric quantile inference procedure for cause-specific residual life distribution with competing risks data. We also derive the asymptotic properties of the proposed estimators of this quantile function. Simulation studies and the unemployment data demonstrate the practical utility of the methodology.     

一种新型香豆素酮可见光敏化染料的合成及其光引发性质的研究

高效的可见光光敏引发体系是目前光聚合研究中的重要领域.3,3′-二(7-二乙胺基)香豆素酮(R)已被公认为一种高效的可见光聚合敏化染料,并可以与Ar⁺激光488 nm波长匹配.本文新合成了一种染料3-(4-二乙胺基-苯丙烯酰基)-7-二乙胺基香豆素(S).实验发现在普通碘钨灯照射下,S/邻氯六芳基双咪唑(HABI)体系具有比已有高效染料R/HABI体系更快的光漂白速度和更高的引发聚合效率,是一种新型高效的可见光光敏聚合引发体系.而且S在不同溶剂中的最大吸收波长在452～489 nm之间,比R红移16～30 nm,因此该体系可以更好地与Ar⁺ (488 nm)激光器匹配.本文对该染料的光敏化机理进行了探讨.     

稳态和动态荧光研究疏水缔合共聚物P(AM/POEA)的自缔合行为和聚集体

应用稳态和动态荧光光谱方法,包括荧光探针、标记荧光和荧光淬灭等研究了共聚物P(AM/POEA)在水溶液中的自缔合性质.这种共聚物由丙烯酰胺(AM)和少量疏水单体2-苯氧乙基丙烯酸酯(POEA)组成.实验结果表明这类共聚物的自缔合行为和聚集体结构主要取决于聚合物的链结构和浓度.由胶束共聚合方法得到具有多嵌段结构的共聚物,它们容易发生疏水缔合,并产生很强的增粘作用,而由普通共聚合方法得到的无规共聚物却没有这些性质.同时这类聚合物的缔合类型及其增粘能力也直接与共聚物中的疏水体含量相关,随疏水体含量增加,由于分子间和分子内缔合的竞争,出现粘度先增后降的现象.在荧光研究的基础上提出了多分子聚合物聚集体的结构模型,它随聚集体浓度增加,进一步形成多联聚集体和网状结构.同时还观察到聚集体中疏水体有序排列现象.     

Removal,recovery and enrichment of metals from aqueous solutions using carbon nanotubes

Environmental pollution caused by toxic metals (heavy metals, radioactive metals, etc.) is one of the major global issues, thus removal of toxic metals from contaminated water seems to be particularly important. On the other hand, the recovery and enrichment of metals, especially noble metals, from waste water is also crucial. To address these issues, nanotechnology plays an essential role in environmental monitoring and pollution control. To remove metals from contaminated water, or enrich metals from waste water, carbon nanotubes (CNTs) and their composites have attracted great attention due to their excellent adsorption performance. The removal efficiency for metal ions by CNTs was observed aroud 10–80 %, which could be improved to approach 100 % by selectively functionalizing CNTs with organic ligands. Herein, we review the applications of CNTs in treatment of toxic metal-containing wastewater for environmental monitoring and metals recovery. Due to their higher sensitivity and selectivity towards the enrichment of metals or detection of toxic metal pollution of the environment, and the latest research progress of using CNT composites for metal treatment is also discussed.     

Ca2．9M0．1Co4O9（M=Ag，La，Ba）复合氧化物体系的制备及电输运性能

采用柠檬酸溶胶-凝胶结合放电等离子烧结方法制备了p型Ca位掺杂的Ca2.9M0.1Co4O9(M=Ag,La,Ba)复合氧化物块体试样,对其进行X射线衍射(XRD)分析,表明产物为单一物相,Ca位掺杂原子可以改变Ca2.9Co4O9多晶体的取向度,掺杂试样取向度随着掺杂原子电负性的降低而提高;对其进行扫描电子显微镜(SEM)分析结果表明,试样呈层状结构,且层状结构随掺杂原子电负性降低而逐渐明显;电性能分析结果表明,测试温度范围内掺杂试样各温度点的电阻率随着掺杂原子电负性的降低而升高,所有试样的载流子传输层未受影响,导电机理未发生变化.其中掺杂电负性最高的Ag原子的烧结体保持最低取向度的同时具有最低的电阻率,在973 K时达6.87 mΩ·cm,而掺杂电负性最低的Ba原子的烧结体具有高的取向度的同时具有较高的电阻率,在973 K时达8.22 mΩ·cm.     

Pt-Se纳米空球修饰玻碳电极上甲酸的电催化氧化

以无定形硒溶胶为模板制备了不同硒覆盖度(θSe)(θSe=0.49,0.39,0.06,0)的Pt-Se和Pt纳米空球(分别记为(Pt-Se)HN和PtHN),发展了利用亚硫酸盐彻底除去核壳纳米粒子上Se的方法.对获得的纳米空球进行了形貌和结构的表征,结果表明所制备的(Pt-Se)HN粒径均匀,分散性好,球壳呈多孔结构.以其作为电催化剂制备了(Pt-Se)HN修饰的玻碳(GC)电极((Pt-Se)HN/GC),利用常规电化学方法比较该电极与PtHN/GC和商用碳载铂(Pt/C)修饰GC(Pt/C/GC)电极对甲酸的催化氧化作用,发现对甲酸氧化的活性顺序为(Pt-Se)HN/GCPtHN/GCPt/C/GC.三种电极催化甲酸氧化的机理有所不同:前者更倾向于通过弱吸附中间体直接氧化成CO2的单途径机理进行,后两者则通过强吸附和弱吸附中间体的双途径机理进行.在一定Se覆盖度条件下,(Pt-Se)HN/GC对甲酸的氧化有助催化作用.