Green micellar stability-indicating high-performance liquid chromatography method for determination of rupatadine fumarate in the presence of its main impurity desloratadine: Oxidative degradation kinetics study

A green micellar stability-indicating high-performance liquid chromatography method was developed for rupatadine fumarate determination in existence with its main impurity desloratadine. Separation was attained using Hypersil ODS column (150 × 4.6 mm, 5 μm), the micellar mobile phase consisted of 0.13 M sodium dodecyl sulfate, 0.1 M disodium hydrogen phosphate adjusted by phosphoric acid to pH 2.8 and 10% n-butanol. The column was maintained at 45^◦C and detection was carried out at 267 nm. A linear response was achieved over the range of 2–160 μg/ml for rupatadine and 0.4–8 μg/ml for desloratadine. The method was applied for rupatadine determination in alergoliber tablets and alergoliber syrup without the interference of methyl paraben and propyl paraben present as main excipients. Rupatadine fumarate revealed pronounced susceptibility to oxidation; further study of oxidative degradation kinetics was carried out. Rupatadine was found to follow pseudo-first-order kinetics when exposed to 10% H₂O₂ at 60 and 80°C and the activation energy was found to be 15.69 Kcal/mol. At a lower temperature (40°C), degradation kinetics regression was best fitted as a polynomial quadratic relationship, thus rupatadine oxidation at a lower temperature tends to adopt a second-order kinetics rate. Oxidative degradation product structure was revealed using infrared and found to be rupatadine N-oxide at all temperature values.     

Application of polymethyl methacrylate in cathode materials of lithium-ion batteries

A study of the Li₂FeSiO₄/C cathode material doped with Mn demonstrated that introduction of polymethyl methacrylate results in a substantial decrease in the particle size and increase in the specific surface area of the cathode material. Polymethyl methacrylate strongly improves the cyclic stability of the cathode material. The discharge capacity after the first cycle was 218 mA h g^–1, and that upon stabilization of the structure of the cathode material, 170 mA h g^–1.     

Self-penetrating and interpenetrating 3D metal-organic frameworks constructed from 4-(4-carboxyphenoxy)-phthalic acid and <Emphasis Type="Italic">N</Emphasis>-donor auxiliary ligands

Two new interesting entangled structures, namely, [Ni_1.5(L)(bpy)₂(H₂O)₃] _n · 3nH₂O (I) and [Cd₃(L)₂(bbi)₂]n · nH₂O (II)(where H₃L is 4-(4-carboxyphenoxy)-phthalic acid, bpy is 4,4′-bipyridine, and bbi is 1,1′-(1,4-butanediyl)bis(imidazole)) have been synthesized and characterized by elemental analysis (EA), infrared spectra (IR), X-ray powder diffraction (XRPD), solid fluorescence and thermogravimetric analysis (TGA). Single-crystal X-ray diffraction analysis revealed that complex I possesses a 3D self-penetrating framework constructed from ladder-like and fishbone-like subunits. Complex II shows a 3D framework of two-fold interpenetration assembled from trinuclear Cd(II) clusters bridged by bbi and L^3? ligands.     

Improvements to CO<Subscript>2</Subscript> headspace biodegradability test

This study proposes changes to the design and evaluation of the CO₂ headspace test, which is used as a simple method for assessment of the complete biodegradability of surfactants. It presents a modified equation for the calculation of biodegradation. It is proposed that the solution of 7 mol L^?1 sodium hydroxide commonly used in the process involving alkalinisation of the vial contents be replaced with 15 mol L^?1 sodium hydroxide. The use of the higher hydroxide concentration leads to a significant reduction in the value of the blank CO₂ headspace test.     

Synthesis of potential inhibitors of glycosyltransferases representing UDP-GlcNAc

Based on rational design of the transition state analog inhibitors of glycosyltransferases, four model glycomimetics of this type, viz. benzyl 2-thio-α-dfructofuranoside 1-diethylphosphate (XIa), its β-anomer (XIb), and their ethyl 2-thio analogs — α-anomer (XIIa) and β-anomer (XIIb), were synthesized. In addition, fourteen precursors arising during the synthesis of the desired final model compounds (XI and XII), partially or fully acetylated benzyl and/or ethyl 2-thiofructofuranoside 1-diethyl phosphates, were isolated and characterized with the aim to prepare complete series of glycomimetics, representing donor UDP-GlcNAc designated for biological assays on human GnT’s, viz. GnT-I, Core2GnT, and GnT-V.     

Antioxidative properties of <Emphasis Type="Italic">Sambucus nigra</Emphasis> extracts

Potential protective effects of elderberry (Sambucus nigra) extracts against oxidative degradation of hyaluronan (HA) were detected in vitro. To induce free-radical-mediated HA degradation, Weissberger’s biogenic oxidative system, which mimics the situation of acute inflammation, was applied. Time- and dose-dependent changes of dynamic viscosity of the HA solutions in the presence and absence of two elderberry extracts produced in 2006 and 2012 were recorded by rotational viscometry (RV). Radical scavenging capacity of both extracts was investigated by the spectrocolorimetric ABTS [2,2′-azinobis(3-ethylbenzothiazoline-6-sulfonic acid) diammonium salt] assay and the “inverted” ABTS assay. Oxygen consumption of the system oxidizing HA either in the absence or presence of the elderberry extracts was determined. The results of RV revealed that an addition of the newer extract (2012) promoted the inhibition of HA degradation more markedly compared to the older extract (2006). The same effect of both extracts on ABTS^·+ scavenging was observed. Inverted ABTS assay demonstrated that colorful substances were not responsible for the radical-scavenging activity. Results of oximetry demonstrated that the effect of the extract from 2006 was more significant than that of the extract from 2012.     

Preparation of Lewis acid ionic liquids for one-pot synthesis of benzofuranol from pyrocatechol and 3-chloro-2-methylpropene

Several Lewis acid ionic liquids (LAILs) with different acidic scales were synthesised and used as catalysts for the synthesis of benzofuranol by condensation of pyrocatechol and 3-chloro-2-methylpropene in one pot. The catalytic activity of these ionic liquids was correlated with their Lewis acidity. Low to moderate conversion with excellent selectivity to benzofuranol was obtained in the presence of the appropriate LAILs. Compared to the two-step synthetic method currently used in industry, a higher yield plateau (81.1%) of benzofuranol was achieved in the presence of [BMIm][AlCl₄] IL as catalyst at 418 K after 4 h. Furthermore, the catalyst is readily separated from the resultant products via decantation and could be reused after treatment in vacuum.     

Robust model-based predictive control of exothermic chemical reactor

A case study of the robust model-based predictive control (MPC) of an exothermic continuous stirred tank reactor (CSTR) with uncertain parameters is presented. Three robust MPC approaches are considered and the simulation results are compared in terms of quality of control performance and total consumption of coolant. The results reveal the main benefits of the considered approaches and confirm that the robust MPC can bring about a reduction in consumption of the coolant.     

Effect of alkylated diphenylamine on thermal-oxidative degradation behavior of poly-<Emphasis Type="Italic">α</Emphasis>-olefin

An oil-soluble antioxidant, alkylated diphenylamine (ADPA), was prepared by alkylation of diphenylamine. The influence of ADPA on the thermal-oxidative stability of poly-α-olefin (PAO8) was evaluated by thermogravimetry (TG). For comparison, the thermal-oxidative stability of PAO8 with zinc dialkyl dithiophosphate (ZDDP) was also investigated. Activation energy (E_a)of the corresponding thermal-oxidative degradation process was evaluated by the Flynn-Wall-Ozawa (FWO) and Kissinger-Akahira-Sunose (KAS) methods. To demonstrate the reliability of the kinetic study, the antioxidant performance of ADPA and ZDDP in PAO8 was also studied by the pressure drop (PDT) and accelerated oxidation (AOT) tests. The results indicate that ADPA has better antioxidant ability than ZDDP in increasing the E_a value and enhancing the oxidative stability of PAO8. Good correlation between the applied test methods was established.     

Density of lithium fluoride—lithium carbonate-based molten salts

The density of the LiF-Li₂CO₃ melts system was measured using the Archimedean method. Using the quadratic regression orthogonal design with two factors, a regression equation for the density of LiF-Li₂CO₃ melts was obtained in which the concentration of LiF and temperature were considered. The results indicated that the density of the LiF-Li₂CO₃ melts decreased with either increasing the concentration of LiF or increasing temperature; a linear relation was observed between density and temperature. In addition, the influences of NaF, KF, NaCl, and KCl additives on the densities of the given systems were studied. The addition of NaF and KF increased the density of the melts, whereas NaCl and KCl resulted in an initial increase and subsequent decrease with an increasing additive concentration. The density attained a maximum at NaCl and KCl mass fraction of approximately 15%.