ZnO-PSAⅡ型异质结界面电荷转移过程研究

采用稳态光致发光光谱和纳秒时间分辨瞬态光谱(NTRT-PL)表征,揭示ZnO-PSA II型纳米异质结光生载流子电荷转移过程,通过甲基橙光降解实验,测得ZnO-NRs和ZnO-PSA紫外光降解率分别为25.5;和60.1;,光降解率提高到2.4倍,表明II型异质结相对于单一半导体而言,能促进光生载流子在界面间电荷转移,有利于载流子的分离.     

矢志创新铸辉煌,壮心不已续华章——贺李启虎院士八十华诞

2019年7月11日,我们迎来了李启虎先生的八十华诞。先生是水声信号处理和声呐设计领域享誉世界的专家、中国科学院院士,曾任中国科学院声学研究所所长、国家“863”计划海洋监测主题专家组组长、总装备部国家重大安全项目专家组组长。他长期从事信号处理理论研究和声呐设计、研制工作,结合我国浅海声传播的特点,创造性地应用信息论、数字信号处理、水声工程等理论,解决了一系列水声信号处理中的问题,为我国国防水声事业及国家信息化建设做出了突出的贡献。     

Electrostatic self-assembly of MXene and edge-rich CoAl layered double hydroxide on molecular-scale with superhigh volumetric performances

It is highly desirable to design and synthesize two-dimensional nanostructured electrode materials with high electrical conductivity,large electrolyte-accessible surface area and more exposed active sites for energy storage applications.Herein,MXene/Co Al-LDH heterostructure has been prepared through electrostatic ordered hetero-assembly of monolayer MXene and edge-rich Co Al-LDH nanosheets in a faceto-face manner on molecular-scale for supercapacitor applications.Benefiting from the unique structure,strong interfacial interaction and synergistic effects between MXene and Co Al-LDH nanosheets,the electrical conductivity and exposed electrolyte-accessible active sites are significantly enhanced.The asprepared MXene/Co Al-LDH-80%(ML-80)film exhibits high volumetric capacity of 2472 C cm-3 in 3 M KOH electrolyte with high rate capability of 70.6%at 20 A g-1.Notably,to the best of our knowledge,the high volumetric capacity is the highest among other previously reported values for supercapacitors in aqueous electrolytes.Furthermore,our asymmetric supercapacitor device fabricated with ML-80 and MXene/graphene composite as cathode and anode,respectively,exhibits impressive volumetric energy density of 85.4 Wh L-1 with impressive cycling stability of 94.4%retention ratio after 30,000 continuous charge/discharge cycles.     

Advances in high carbon dioxide separation performance of poly(ethylene oxide)-based membranes

Poly(ethylene-oxide)(PEO)-based membranes have attracted much attention recently for CO2 separation because CO2 is highly soluble into PEO and shows high selectivity over other gases such as CH4 and N2.Unfortunately,those membranes are not strong enough mechanically and highly crystalline,which hinders their broader applications for separation membranes.In this review discussions are made,as much in detail as possible,on the strategies to improve gas separation performance of PEO-based membranes.Some of techniques such as synthesis of graft copolymers that contain PEO,cross-linking of polymers and blending with long chains polymers contributed significantly to improvement of membrane.Incorporation of ionic liquids/nanoparticles has also been found effective.However,surface modification of nanoparticles has been done chemically or physically to enhance their compatibility with polymer matrix.As a result of all such efforts,an excellent performance,i.e.,CO2 permeability up to 200 Barrer,CO2/N2 selectivity up to 200 and CO2/CH4 selectivity up to 70,could be achieved.Another method is to introduce functional groups into PEO-based polymers which boosted CO2 permeability up to 200 Barrer with CO2/CH4 selectivity between 40 and 50.The CO2 permeability of PEO-based membranes increases,without much change in selectivity,when the length of ethylene oxide is increased.     

光与原子纠缠存储寿命与磁场噪声关系的实验研究

在冷原子系综中,利用自发拉曼散射过程产生光与原子纠缠,测量了恢复效率随存储时间的关系。实验结果显示在没有施加轴向磁场时的存储寿命仅仅只有40μs。而在施加轴向磁场的情况下,存储时间在50μs以后甚至在400μs时都可以测量到明显的恢复信号,存储寿命明显高于100μs,远高于未施加轴向磁场时的情况。对这个实验现象进行分析认为:原子所处的环境中存在磁场噪声的影响,当没有轴向磁场时,噪声会扰乱自旋波信号的相位;当有轴向磁场时,磁场噪声对自旋波相位的影响便被抑制了。     

Efficient and stable planar all-inorganic perovskite solar cells based on high-quality CsPbBr3 films with controllable morphology

All-inorganic cesium lead bromide(CsPbBr3)perovskite is attracting growing interest as functional materials in photovoltaics and other optoelectronic devices due to its superb stability.However,the fabrication of high-quality CsPbBr3 films still remains a big challenge by solution-process because of the low solubility of the cesium precursor in common solvents.Herein,we report a facile solution-processed approach to prepare high-quality CsPbBr3 perovskite films via a two-step spin-coating method,in which the Cs Br methanol/H2 O mixed solvent solution is spin-coated onto the lead bromide films,followed by an isopropanol-assisted post-treatment to regulate the crystallization process and to control the film morphology.In this fashion,dense and uniform CsPbBr3 films are obtained consisting of large crystalline domains with sizes up to microns and low defect density.The effectiveness of the resulting CsPbBr3 films is further examined in perovskite solar cells(PSCs)with a simplified planar architecture of fluorine–doped tin oxide/compact Ti O2/CsPbBr3/carbon,which deliver a maximum power conversion efficiency of 8.11%together with excellent thermal and humidity stability.The present work offers a simple and effective strategy in fabrication of high-quality CsPbBr3 films for efficient and stable PSCs as well as other optoelectronic devices.     

微波辅助合成Ru(Ⅱ)配合物及其自组装多层膜

运用微波辅助合成技术制备得到对称性钌(Ⅱ)配合物,对该配合物进行了¹H NMR,ESI-MS和TG分析。该钌配合物两端对称的磷酸基团可通过共价键作用组装到纳米铟锡金属氧化物导电玻璃(Indium Tin Oxides,ITO)表面,使ITO表面呈现亲水性。利用锆离子作为桥梁成功组装了钌多层膜,并对该多层膜进行了循环伏安法(Cyclic Voltammetry,CV)及紫外-可见吸收光谱法(Ultraviolet-visible absorption spectrometry,UV-Vis)等光电化学分析,实验结果表明层层自组装过程中膜沉积均匀,在0.53V出现可逆的氧化还原峰,在300~600nm的紫外可见区域出现强且宽的吸收峰,表明该钌配合物具有优良的光电性能。     

人造麝香的危害性及其残留检测方法研究进展

综述了近年来人造麝香的危害性及其残留检测方法的研究进展。对化妆品、水、大气、土壤和药物中人造麝香的前处理方法和检测方法进行了比较,同时对此领域的发展方向进行了展望(引用文献31篇)。     

Colorimetric enantiodiscrimination of mandelic acid by indicator displacement assay

The colorimetric enantiodiscrimination between mandelic acid and L-proline-Cu(II) is exploited to develop enantioselective indicator displacement assays. The sensitivity of the assay could be tuned by using a colorimetric indicator. The chromophoric ligand, pyrocatechol violet, effectively competes with the mandelic acid guest for open coordination sites on L-proline-Cu(II). The DA could be increased to 0.12 by changing the ratio of(+)- and(à)-mandelic acid concentrations that were found to be optimal from the displacement experiments. The resultant enantiomer excess versus DA relationship is linear. From the calibration curves, the absorbance values of the unknowns may be calculated for the enantiomeric excess value and the colorimetric enantiodiscrimination of mandelic acid can thus be obtained.     

Deoxygenation of methyl laurate to hydrocarbons on silica-supported Ni-Mo phosphides: Effect of calcination temperatures of precursor

SiO2-supported Ni-Mo bimetallic phosphides were prepared by temperature-programmed reduction(TPR) method from the phosphate precursors calcined at different temperatures. Their properties were characterized by means of ultraviolet-visible diffuse reflectance spectroscopy(UV-Vis DRS), H2temperature-programmed reduction(H2-TPR), X-ray diffraction(XRD), transmission electron microscopy(TEM), CO chemisorption, H2 and NH3temperature-programmed desorptions(H2-TPD and NH3-TPD). Their catalytic performances for the deoxygenation of methyl laurate were tested in a fixed-bed reactor. When the precursors were calcined at 400 and 500?C, respectively, Ni Mo P2 phase could be formed apart from Ni2 P and Mo P phases in the prepared C400 and C500 catalysts. However, when the precursors were calcined at600, 700 and 800°C, respectively, only Ni2 P and Mo P phases could be detected in the prepared C600, C700 and C800 catalysts. Also, in C400, C500 and C600 catalysts, Mo atoms were found to be entered in the lattice of Ni2 P phase, but the entering extent became less with the increase of calcination temperature. As the calcination temperature of the precursor increased, the interaction between Ni and Mo in the prepared catalysts decreased, and the phosphide crystallite size tended to increase, subsequently leading to the decrease in the surface metal site density and the acid amount. C600 catalyst showed the highest activity among the tested ones for the deoxygenation of methyl laurate. As the calcination temperature of the precursor increased, the selectivity to C12 hydrocarbons decreased while the selectivity to C11 hydrocarbons tended to increase. This can be mainly attributed to the decreased Ni-Mo interaction and the increased phosphide particle size. In sum, the structure and performance of Ni-Mo bimetallic phosphide catalyst can be tuned by the calcination temperature of precursor.