石灰石闪蒸改性及脱硫性能的试验研究

本文对3种不同产地的石灰石进行了闪蒸改性处理,对改性石灰石颗粒的孔径分布进行了测定,研究了压力、温度等参数对石灰石闪蒸改性的影响。并在气流反应器上对闪蒸后的样品进行了硫化试验。结果表明,在一定的压力和温度下,闪蒸处理能够增大石灰石颗粒的微孔孔径,并使石灰石样品的脱硫性能得到较大提高。     

Kinetic behaviour of aluminum naphthenate/benzene system in process of gelation and degradation

The kinetic behaviour of aluminum naphthenate/benzene system in the process of gelation and degradation was systematically studied. The results obtained from the kinetic experiments indicated that the gelation stage was in accordance with a kinetic model of an auto-catalytic first-order reaction, and the degradation stage was a simple first-order reaction. The rate constants in these two stages at various temperaturs were measured. And the determined apparent activation energies for the gelation stage and for the degradation stage are 27.5±2.0 and 37.7±2.3 kJ/mol, respectively.     

渗透蒸发脱盐的研究

将选择性透过膜和汽化相结合的分离过程是当前的研究热点,其中采用低热导率、疏水性多孔膜的过程称膜蒸馏,而采用非多孔性半透膜的过程则称渗透蒸发。将该分离过程用于盐水脱盐已有很多报道,并已建成中试设备,但采用的大多是膜蒸馏,所用膜的成本很高。本文研究制了一种价廉并带有致密层的非对称性含钠离子聚乙烯醇(PVA)-聚乙二醇(PEG)分离膜,并用该膜对渗透蒸发脱盐进行了初步研究。 1 实验 1.1 膜制备 将一定配比的PVA与PEG及钠盐水溶液在适当温度下混溶,加入适量醛类交联剂,数分钟后在选定的基材上流涎成膜,室温下自然晾干,再经35℃～50℃控温红外线干燥。 1.2 膜结构及脱盐流程 扫描电镜拍摄的膜断面形貌图像(图1)表明,该膜为非对称膜,表层厚约13μm,其中厚约2～3/μm的上表层为疏松结构,下表层为致密结构。将该类膜用于3.5％NaCl水溶液脱盐,运行4h后再漂洗、干燥作断面Na元素波谱线分析(图2)发现,在膜下层(右侧)厚约30μm层内检测不到Na元素。脱盐流程见文献。     

利用LB技术以寡聚DNA为模板构建CdS纳米结构

利用Langmuir-Blodgett技术制备了十八胺（ODA）／十聚腺嘌呤（oligo-A10)单分子膜，并以其为模板制备了不同形状的Cds纳米结构，结果表明以在低膜压下转移的寡聚DNA单层为模板可诱导生成线形的Cds纳米结构，而以在主膜压下转换的寡聚DNA单层膜板得到的是Cds的球形结构聚集体。     

碘掺杂的3-乙基-5-[2-(3-乙基-2苯并噻唑啉基)亚乙基]罗丹宁的结构与电性能

The merocyanine dye 3-ethyl-5-(2-(3-ethyl-2-benzothiazolinylidene)-ethylidene)-rhodanine (BTER) known as Agfa-10 has been found to have a good photoconductivity as solution cast film. In this paper iodine-doped BTER was obtained by doping with iodine vapor. Its structure was investigated with the following characteristies. 1 The doped iodine had been excited as I_3~- anion. 2 Because the electron located on the sulphur atom was transferred to iodine, the charge transfer complex of (BTER-I_3) formed. 3 During the iodine doping process, BTER changed from α-form to β-modification. These had been identified by X-ray diffraction, VIS-absorption spectra and SEM picture.4 From the volt-Ampere curve obtained from sandwich cell, when E≤2.2×10~(-1) V·cm~(-1), the room temperature electrical conductivity of BTER and BTER-I_3 were found to be 2.22×10~(-10) s·cm~(-1) and 2.6×10~(-7) S·cm~(-1), respectively.     

Preparation and characterization of polyvinyl alcohol-capped CdSe nanoparticles at room temperature

Polyvinyl alcohol (PVA)-capped CdSe nanoparticles were successfully prepared by a one-step solution growth technique at room temperature and ambient pressure. X-ray diffraction, transmission electron microscopy, infrared spectra, and X-ray photoelectron spectra were used to characterize the final product. The as-prepared CdSe nanocrystals were well dispersed and uniform in shape and the diameter of the particles was confined within 8 nm. Ultraviolet-visible absorption spectra were used to study the confined growth process of PVA-capped CdSe nanoparticles. Photoluminescence measurement showed the near band-edge luminescence of the final product.     

INFLUENCE OF PLASMA DENSITY ON NUCLEATED DENSITY OF DIAMOND

The predeposition method for mereasing CH_4 concentration ininitial stage of diamond synthesis by plasma chemical vapor deposition.isused to enhance nucleated density of diamond films.The plasma parametersare diagnosed in situ using the Langmuir double probe.The relation betweenplasma ion density and nucleated densitv of diamond is revealed Increasingplasma ion density results in enhancement of nucleated density of diamondobviously     

Nd-Fe-B alloy-densified agarose gel for expanded bed adsorption of proteins

Novel dense composite adsorbents for expanded bed adsorption of protein have been fabricated by coating 4% agarose gel onto Nd-Fe-B alloy powder by a water-in-oil emulsification method. Two composite matrices, namely Nd-Fe-B alloy-densified agarose (NFBA) gels with different size distributions and densities, NFBA-S (50-165 microm, 1.88 g/ml) and NFBA-L (140-300 microm, 2.04 g/ml), were produced. Lysozyme was used as a model protein to test the adsorption capacity and kinetics for the NFBA gels modified by Cibacron blue 3GA (CB-NFBA gels). Liquid-phase dispersion behavior in the expanded beds was examined by measurements of residence time distributions, and compared with that of Streamline SP (Amersham-Pharmacia Biotech, Sweden). The dependence of axial mixing in the expanded beds on flow velocity, bed expansion degree. settled bed height, and viscosity of liquid phase was investigated. Breakthrough curves of lysozyme in the expanded beds of the CB-NFBA gels were also examined. The dynamic binding capacity at 5% breakthrough was 23.3 mg/ml matrix for the CB-NFBA-S gels, and 16.7 mg/ml matrix for the CB-NFBA-L, at a flow velocity of 220 cm/h. The results indicate that the NFBA gels are promising for expanded bed adsorption of proteins.     

涡轮叶栅前缘槽缝气膜冷却的数值模拟

应用FINE/TURBO软件包,求解三维雷诺平均N-S方程,对叶片前缘有两列冷却槽缝的气膜冷却流场进行了数值模拟,获得了不同吹风比下叶片表面静压分布与极限流线.在计算结果与实验数据良好符合的基础上,详细分析了槽缝冷却三维定常流场结构与槽缝附近的流动细节.研究结果表明,槽缝冷却对前缘压力分布影响较大,且在压力面引起较大的分离流动,不利于冷却.     

喷流噪声控制方法实验研究

概述了当前国内外喷流噪声控制方法发展概况.通过实验比较了V形槽喷嘴、圆瓣形喷嘴、斜口喷嘴和凸台组合喷嘴等几种不同几何形状喷嘴在Ma=0.8～1.4范围内的喷流噪声特性及推力性能.实验结果表明,斜口喷嘴、凸台组合喷嘴降噪效果最为明显,不过两种喷嘴的推力损失较大.V形槽喷嘴和圆瓣形喷嘴有着相同的降噪机理,即能将噪声从低频段向高频段迁移,而且推力损失相对较小,有着广泛的应用前景.