Investigation on nonradiative decay of I13/2→I15/2 transition of Er-doped oxide glasses

Nonradiative decay of ⁴I_13/2→⁴I_15/2 transition of Er³⁺ has been investigated in a series of oxide glasses. For Er³⁺-doped glass samples, the Judd-Ofelt analysis on absorption spectra was performed and the fluorescence lifetime was determined by extrapolating to zero Er³⁺ concentration limit. Infrared spectra were measured in order to investigate the influence of OH⁻ groups in different glasses. The effects of glass matrix on the decay rate were discussed from the viewpoint of phonon energy, variations of effective fields, and OH⁻ groups. Compared to other glasses, phosphate glass presents low quantum efficiency and large nonradiative decay rate due to its high phonon energy and hygroscopic behavior.     

Comparative investigation of up-conversion luminescence in Tm/Yb-codoped germanate-niobic and germanium-bismuth glasses: effect of phonon density on up-conversion emission

Tm³⁺/Yb³⁺-codoped germanate-niobic (GN) and germanium-bismuth (GB) glasses have been synthesized by conventional melting and quenching method. Intense blue and weak red emissions centered at 477 and 650 nm, corresponding to the transitions ¹G₄→³H₆ and ¹G₄→³H₄, respectively, were observed at room temperature. The possible up-conversion mechanisms are discussed and estimated. GN glass showed a weaker up-conversion emission than GB glass, which is inconsistent with the prediction from the difference of maximum phonon energy between GN and GB glasses. In this paper, Raman spectroscopy was employed to investigate the origin of the difference in up-conversion luminescence in the two glasses. Compared with phonon side-band spectroscopy, Raman spectroscopy extracts more information including both phonon energy and phonon density. For the first time, our results reveal that, besides the maximum phonon energy, the phonon density of host glasses is also an important factor in determining the up-conversion efficiency.     

Diagramme polythermique du systeme ternaire H2O—Al(NO3)3—Mg(NO3)2

The solid—liquid equilibria of the ternary system H₂O—Al(NO₃)₃—Mg(NO₃)₂ were studied at –30, –20, –10 and 0°C by using a synthetic method which allows to detemine all the characteristic points of isothermal sections. The stable solid phases which appear are respectively: ice, Al(NO₃)₃·9H₂O, Mg(NO₃)₂·9H₂O and Mg(NO₃)₂·6H₂O. Neither double salts nor mixed crystals are observed in the temperature and composition field studied. Polytherm diagram layout show two invariant transformations correspond with an eutectic point and a peritectic point.This revised version was published online in November 2005 with corrections to the Cover Date.     

Nonlinear and chaotic oscillations of a constrained cantilevered pipe conveying fluid: A full nonlinear analysis

In this paper, the planar dynamics of a nonlinearly constrained pipe conveying fluid is examined numerically, by considering the full nonlinear equation of motions and a refined trilinear-spring model for the impact constraints—completing the circle of several studies on the subject. The effect of varying system parameters is investigated for the two-degree-of-freedom (N=2) model of the system, followed by less extensive similar investigations forN=3 and 4. Phase portraits, bifurcation diagrams, power spectra and Lyapunov exponents are presented for a selected set of system parameters, showing some rather interesting, and sometimes unexpected, results. The numerical results are compared with experimental ones obtained previously. It is found that in the parameter space that includesN, there exists a subspace wherein excellent qualitative, and reasonably good (N=2) to excellent (N=4) quantitative agreement with experiment. In the latter case, excellent agreement is not only obtained in the threshold flow velocities (u) for the key bifurcations, but the inclusion of the nonlinear terms improves agreement with experiment in terms of amplitudes of motion and by capturing features of behaviour not hitherto predicted by theory.     

Determination of the Lipophilicity of Xanthines by Reversed-Phase Liquid Chromatography

JPC – Journal of Planar Chromatography – Modern TLC -     

Synthesis and characterization of surface-cyanofunctionalized poly (N-isopropylacrylamide) latexes

 A series of P[N-isopropylacrylamide (NIPAM)] latexes with different contents of cyano groups were successfully prepared by either seeded or shot-growth polymerizations of an aqueous solution containing acrylonitrile (AN) onto a seed P[NIPAM] latex, respectively, and further characterized by FT-IR, ¹H-NMR, elemental analysis, as well as by quasielastic light scattering (QELS) and scanning electron microscopy (SEM). All prepared surface-cyanofunctionalized P[NIPAM] latexes exhibited the same range of lower critical solution temperature (LCST) as a pure P[NIPAM] latex. The shot polymerization process proved more efficient at yielding cyano derivatized latexes than the seeded polymerization technique. The amount of incorporated cyano groups onto the particles was determined with a good correlation both by ¹H-NMR and elemental analysis. The higher the amount of initially introduced AN monomer in the reaction mixture, the more cyano groups were incorporated onto the particles. The surface of the particles with high content of cyano groups appeared quite rough by SEM in comparison with that of the pure P[NIPAM] particles. Received: 25 February 1998 Accepted: 23 June 1998     

Frequency-domain measurement of the photodegradation process of fluorescein

The frequency-domain technique is applied to measure the photodegradation rate of fluorescein in aqueous solutions. The illuminating light is modulated, and the changes in fluorescence from the illuminated region are detected synchronously. A constant flow rate is imposed on the fluorescein solution to control the mass transport of fluorescein into the illuminated region. The fluorescence response is described by a model that assumes that photodegradation occurs from the triplet excited state. The predictions of the model are consistent with the observed variations in the fluorescence response with flow rate, modulation frequency and incident power. We discuss in this article how the dependence of the model parameters on experimental conditions can be used to infer the photodegradation rate as well as some of the details of the photodegradation mechanism. The results are consistent with the known mechanism of photodegradation of fluorescein. The frequency-domain technique gives a photodegradation rate of 53 s(-1) in an air-saturated solution and 37 s(-1) in solutions purged with argon gas.