Study of the drying zirconia gel-precipitates using thermal analysis

Thermoanalytical techniques (TG, DTG, DTA and EGA) can be helpful in studying gel compositions and relating the chemical history and the role of the precipitant to the chemical properties of gels. The objective of our work was to determine the influence of the initial conditions in the reaction mixture on the product characteristics. Zirconia gels were prepared by the gelprecipitation method by the hydrolysis of zirconium tetrachloride dissolved in methanol. The substitution of water by methanol was chosen in order to obtain a reaction medium in which better control of the hydrolysis and condensation reactions of the zirconium precursor were achieved and thus also better control of the final properties of the dried zirconia gel-precipitates could be obtained. The nature of the hydrated zirconia gels obtained during the gelation process is strongly influenced by the conditions of the reaction mixture, e.g. concentration of the zirconium precursor, the mixing rate and particularly by the amount of water added. To distinguish between various types of water in the gel-precipitates, the furnace atmosphere and the partial water pressure were altered appropriately. It was shown that initial zirconium to water molar ratio has a significant effect on the properties of the final products. It was assumed that, according to the preparation conditions, three different types of water are present in the formed zirconia gel-precipitates. Modification of the dehydration processes of zirconia gel-precipitates enables control of the final microstructural and surface properties of the dried gels which are suitable for further catalysts support as well as mixed oxide preparation.     

Microwave propagation parameters in magnetic fluids

Complex dielectric permittivity and complex magnetic permeability measurements of two magnetic fluids (as microwave propagation media), in the approximate range 0.2-5GHz were performed. The two samples consisted of magnetite nanoparticles, dispersed in kerosene and in water, respectively. Based on the dielectric and magnetic measurements, the frequency (f ) dependence of the attenuation parameter, , the phase constant, , the propagation constant, , the intrinsic impedance, Z_m, the refractive index, n , the reflection coefficient, R , the wavelength, and the skin depth, , of the investigated samples were determined.     

Lead-free ferroelectric BaTiO3 doped-(Na0.5Bi0.5)TiO3 thin films processed by pulsed laser deposition technique

The difficulties in synthesizing phase pure BaTiO₃ doped-(Na_0.5Bi_0.5)TiO₃ are known. In this work, we reporting the optimized pulsed laser deposition (PLD) conditions for obtaining pure phase 0.92(Na_0.5Bi_0.5)TiO₃-0.08BaTiO₃, (BNT-BT_0.08), thin films. Dielectric, ferroelectric and piezoelectric properties of BNT-BT_0.08, thin films deposited by PLD on Pt/TiO₂/SiO₂/Si substrates are investigated in this paper. Perovskite structure of BNT-BT_0.08 thin films with random orientation of nanocrystallites has been obtained by deposition at 600 °C. The relative dielectric constant and loss tangent at 100 kHz, of BNT-BT_0.08 thin film with 530 nm thickness, were 820 and 0.13, respectively. Ferroelectric hysteresis measurements indicated a remnant polarization value of 22 μC/cm² and a coercive field of 120 kV/cm. The piezoresponse force microscopy (PFM) data showed that most of the grains seem to be constituted of single ferroelectric domain. The as-deposited BNT-BT_0.08 thin film is ferroelectric at the nanoscale level and piezoelectric.     

Inclusiveπ° production in 360 GeVpp interactions using the european hybrid spectrometer

The intermediate and forward gamma detectors of EHS are used to reconstructπ°'s produced by 360 GeV/cpp interactions in the Rapid Cycling Bubble Chamber (RCBC). Using thepp forwardbackward symmetry, the inclusiveπ° production cross section is obtainedσ _π°=(132±11) mb. The averageπ° multiplicity is determined as a function of the charged particle multiplicity. The (1?x) dependence is given for differentp _T regions.     

Segregation of concurrent sounds. II: Effects of spectral envelope tracing, frequency modulation coherence, and frequency modulation width

The research presented here concerns the simultaneous grouping of the components of a vocal sound source. McAdams [J. Acoust. Soc. Am. 86, 2148-2159 (1989)] found that when three simultaneous vowels at different pitches were presented with subaudio frequency modulation, subjects judged them as being more prominent than when no vibrato was present. In a normal voice, when the harmonics of a vowel undergo frequency modulation they also undergo an amplitude modulation that traces the spectral envelope. Hypothetically, this spectral tracing could be one of the criteria used by the ear to group components of each vowel, which may help explain the lack of effect of frequency modulation coherence among different vowels in the previous study. In this experiment, two types of vowel synthesis were used in which the component amplitudes of each vowel either remained constant with frequency modulation or traced the spectral envelope. The stimuli for the experiment were chords of three different vowels at pitch intervals of five semitones (ratio 1.33). All the vowels of a given stimulus were produced by the same synthesis method. The subjects' task involved rating the prominence of each vowel in the stimulus. It was assumed that subjects would judge this prominence to be lower when they were not able to distinguish the vowel from the background sound. Also included as stimulus parameters were the different permutations of the three vowels at three pitches and a number of modulation conditions in which vowels were unmodulated, modulated alone, and modulated either coherently with, or independently of, the other vowels. Spectral tracing did not result in increased ratings of vowel prominence compared to stimuli where no spectral tracing was present. It would therefore seem that it has no effect on grouping components of sound sources. Modulated vowels received higher prominence ratings than unmodulated vowels. Vowels modulated alone were judged to be more prominent than vowels modulated with other vowels. There was, however, no significant difference between coherent and independent modulation of the three vowels. Differences among modulation conditions were more marked when the modulation width was 6% than when it was 3%.     

Tunable subnanosecond laser pulse generation using an active mirror concept

We report (theory, experimental check) an improved approach for generation of a tunable, subnanosecond pulse (0.1–0.4 ns), based on a single pulsation (“spike”) separation from the transient oscillations in a dye laser with active mirror (AMIR). A pumping by 20–50 ns pulses from Q-switched Nd:YAG laser is considered. The separation is in original, two-spectral selective channels cavity, where the forced by AMIR quenched generation at one of the wavelength stops initially started spiking generation at the other wavelength after the first spike development. The AMIR quickly starts the quenching generation at a precisely controlled moment and with necessary intensity thus assuring the desired separation. An advantage is a high reproducibility of the separation for high (~250%) pump power fluctuations combined with tuning in large range (~20 nm). To obtain such an operation we form ~1 ns leading front pump pulse by electrooptical temporal cutting of the input pump pulse and use an optical delay line. This increases also a few times the power in the separated spike (to be ~100 kW). Our approach widens the combinations of lasers for effective applications of spike separation technique (dye lasers excited by Q-switched solid-state or Cu-vapor lasers).     

Microwave specific loss power of magnetic fluids subjected to a static magnetic field

This paper reports on the frequency dependence of the magnetic and electric power dissipation in a magnetic fluid sample, in the microwave frequency range (0.5 to 8GHz), at various values of the static magnetic field (0 to 167.8kA/m). The computation of the power dissipation relies on the experimental values measured for the complex dielectric permittivity, ɛ = ɛ′ - iɛ″, and the complex magnetic permeability, μ = μ′ - iμ″, over the same frequency range. The results show that the magnetic power dissipation is much larger than the electric one for the investigated sample. At a specific frequency, f (Hz) , the power dissipation, p, depends on the external magnetic field, and exhibits a maximum. The result obtained suggests the possibility of controlling the energy absorption in the microwave range by means of the application of an external magnetic field.